Contains a fix for the AXI4LITE_ASSIGN macro, and adds
AXI4LITE_PORT_ASSIGN, AXI4LITE_PORT_ASSIGN_NR, and
AXI4LITE_DEBUG_ASSIGN macros.
Original-commit: c718faf3387a07a9a1b86ab473f6ed7ac4cb493a
Components are connected together with AxiStreamIfc. Some features
include:
(1) Add bytes to the start of a packet
(2) Remove bytes from a packet
(3) Wrappers for some older components
a. fifo - buffer but imediately pass a packet
b. packet_gate - buffer and hold till end of packet
c. width_conv - cross clock domains and change width of axi bus
The AxiStreamIf was moved from PkgAxiStreamBfm to its own file. It can
be used to connect to ports with continuous assignment.
AxiStreamPacketIf must be used procedurally but allows the following
new methods:
- reached_packet_byte - notify when tdata contains a paritcular byte
- get_packet_byte/get_packet_field - extract a byte or field from axi
- put_packet_byte/put_packet_field - overwrite a byte or field onto axi
Original-commit: c3bca6c87700054c96320de119a58f6a688dbd5a
(1) Synthesizable AxiLiteIf
(2) Simulation model for AxiLite contains an AxiLiteTransaction class
and an AxiLiteBfm class.
Important Methods
a. wr - performs non-blocking write and checks for expected response
b. wr_block - performs a blocking write and provides response
c. rd - performs a non-blocking read and checks for expected response
d. rd_block - persforms a blocking read and provides response
The model allows parallel execution of reads and writes, but enforces
rd and write ordering when using the above methods. When transactions
are posted directly, ordering is not guaranteed, and reads and writes
are put on the interface immediately.
Original-commit: afee1888dd7c2d9d95e537f505ce7ab36252763a
Adds LATENCY parameter to control the ammount of pieplineing. Adds a
clock enable to control the advance of the pipeline.
Used in xport when calculating new UDP headers for CHDR traffic.
Original-commit: dd9847c5c3c3fac17658b526a7d8894711af086e
This fixes the rfnoc_null_src_sink, chdr_crossbar_nxn, and
chdr_stream_endpoint blocks so that wider CHDR widths are properly
supported. It also updates PkgChdrBfm to able to properly test these
blocks. The testbenches have been updated to test both 64 and 512-bit
widths.
Original-commit: 3af8dcaacfa4bf36dcae3bdbf0b353385b7063c6
The existing SPI core (simple_spi_slave.v) was limited to 32 bit. This
commit adds a second spi core with capability to transfer up to 64 bits
while keeping the same amount of resources when using generic setting
MAX_BITS = 32. Furthermore, the new module aligns mosi and miso with the
edges of sclk. The register stages were not aligned in the existing
version.
Original-commit: 366cab1fef44f1132a2acf8046ecaeac80793ccc
During recreation of block diagrams any RTL modules will be kept in
hidden directories within the build directory. Updates of the RTL
sources might not be taken into account. Solution is to remove Xilinx's
hidden project directories before calling vivado.
Original-commit: f17a5113e228ac1bc5312193eb8f687e127184a3
Previously, if a write occurred before the FIFO was ready then a
write could hang as the data channel would complete but leave the
address channel in a state where it would never complete. The fix is
to hold off acknowledging on the data channel until the FIFO is ready.
Original-commit: 3f6ad749b06094b0e16b412a791ba3f2ac509600
Add DEFAULT_M and DEFAULT_N parameters for rate changing cores.
This allows the host to not need to configure fixed rate change
cores.
Original-commit: 983fad664436301c31c3bc8c81b538a41537598b
This change allows detection of attempting to execute setupenv.sh
rather than sourcing it, which is required.
Original-commit: 6faec1d4a14a1af52681aabf19c9040dcee772ff
This adds support for colored output and support for directories added
to the list of source files (for HLS support).
Original-commit: 5b3d66e5b7cedb7098de3e4dbbee70af04a3626e
For HLS builds, the output file names aren't known in advance. This
makes it difficult to write the Makefile to pull in the files and pass
them to the build tools. This change allows you to add a directory as
your HDL source so that all files in the directory will be pulled in by
the build process.
Original-commit: 90933d9b2faf392fd26f3f7ca32f73719614a40a
The address ranges configured for the AXI interconnect IP limited the
amount of accessible DRAM to two 32 MB regions. This change makes the
full 1G available to all DRAM ports.
Original-commit: bba0cddfadcb744e8a6fae27d57ba8d3995eaf64
The decimation in the rx_frontend_gen3 was added to reduce the bandwidth
between the Radio and the DDC due to the limitation in bandwidth over
the crossbar for dynamically connected blocks. The default FPGA image
for the X300 now has a static connection between the Radio and DDC, so
this is no longer necessary.
This change allows the TwinRX receive channels to be time aligned with
channels from other daughterboards so they can be used in the same
streamer.
Signed-off-by: Michael West <michael.west@ettus.com>
Original-commit: d0c162bc7a4ac82f6104506b17d7be05e1780336
Sets time increment based on tick rate and sample rate instead of
assuming one tick per sample. Defaults to legacy behavior.
Minor compat number bumped on DUC and DDC blocks.
Signed-off-by: Michael West <michael.west@ettus.com>
Original-commit: 12dfb97c8efce40494efb35bdd81d06b6f8b9b62
Make timekeeper tick on every cycle of the radio clock.
Signed-off-by: Michael West <michael.west@ettus.com>
Original-commit: 7886b71f13e9f6e5786c95286ef98f49ab716119
This updates the chdr_to_axis method so that it doesn't change the
input chdr_packet object. This is useful in case there are other
references to that object in use. Not modifying the object means that
you don't always have to copy the object before passing it to this
method.
Original-commit: 259506c4993834d9ef8ccb48635623552b075237
The axis_data_to_chdr block previously only sampled the sideband
information at the end of the packet. This adds a parameter that
controls if the sideband information should be sampled at the beginning
of the packet or the end of the packet. In the former case, large
internal packet buffers are not required.
Original-commit: a8c4f021277cf3b0a0897fa9da0252541512f3a6
Add -voptargs=+acc to the default options when running vsim. This
option enables debug command access to objects in the design, which is
generally needed for debugging in the GUI.
Original-commit: eed2d2348cab7dc786673f0649373809d04027d5
The axis_split module takes a single AXI-Stream input and duplicates it
onto multiple AXI-Stream outputs. This block correctly handles the
somewhat tricky flow-control logic so that the AXI-Stream handshake
protocol is honored at all top-level ports.
Original-commit: fa0f4b2833119d57d331f592028ff9f032895c89
This commits enables the FPGA build infrastructure to require a very
specific Vivado version, all the way to the patch level.
Vivado typically has the following version format:
Year.release.update_patch
This commit enables setupenv_base.sh to optionally look for the
environment variable VIVADO_VER_FULL, which should contain the
full Vivado version in the format specified above.
Vivado is directly used to retrieve the installed version, returning
an error if the requested version is not found.
Example in setupenv.sh (which calls setupenv_base.sh):
VIVADO_VER=2019.1
VIVADO_VER_FULL=2019.1.1_AR73068
The setupenv.sh script will setup Vivado 2019.1, but it will also
verify that both Update 1 and patch AR73068 are installed.
Original-commit: 932b7cbb040cef7fce0c83f81839722fd8ad5bdf
Xilinx changed the way [all_registers -edge_triggered] is treated such
that set_max_delay constraints that use it can cause segmentation and
cause clocks to not be propagated to all endpoints. Changing to
[all_ffs] avoids this potential issue.
Original-commit: 55e422535292c29de00b80f15b0a49ca3fb94f26
viv_utils.tcl will now read files with the .sdc suffix using the
read_xdc Vivado command. This is especially useful when I/O timing
constraints in the FPGA and CPLD need to depend on a common constant.
Original-commit: b47b1a467ee5796dbce359ff34c9d55a6acebc82
The latency through the combiner is static if only one master interface
is used and PRIORITY=1 is set.
Original-commit: 4e3650c0d7ac9bea3720151fbb23591f187590c7
Xilinx changed the default Vivado install location from /opt/Xilix to
/tools/Xilinx. This commit adds support for finding Vivado in either
the new location or the old location.
Original-commit: 156d714b8fb288100d242ea200ae1d1dcd6bcd57
This adds the "modelsim" simulator option to run_testbenches.py to allow
for regression testing of the native ModelSim simulation target.
Original-commit: 39d6007ca7e3b27e8230db6690faa7469ca62cb2
Wade Fife