This pipelines ctrlport_timer to eliminate the long combinational path
caused by the time comparisons. This change also removes the
PRECISION_BITS parameter and converts it to a signal named
time_ignore_bits.
Original-commit: c6035320215f270d7658cfb6195a96a0b84d6aa7
Add a SystemVerilog interface for connecting AXI4 ports, and an
associated header file with helper macros.
Original-commit: 04d29e85b0c0698e3de96b54fd3f6e04eb439f74
This adds the ability to call BUILD_VIVADO_IP, as before, followed by
REBUILD_VIVADO_IP_WITH_PATCH to patch a file generated by the IP and
then rebuild the IP with the patched file.
Original-commit: 78315eca698333ad4dc32818e24c7bf6a740c0cb
This commit includes the following changes to the tools:
- Change part definition in XCI and BD editors for the RFSoC family
- Resolve part name in Vivado IP management utilities with
viv_gen_part_id.py
Original-commit: fba23eb42c91ca1bc1108b5ba50c1b567cb9b59d
Per the RFNoC specification, if we set the frequency of flow
control updates to 0 then the input stream will not send flow control
status updates to the output stream handler.
This change makes it so that when the frequency of flow control status
updates is configured to be zero in the FPGA output stream handler
(i.e., cfg_fc_freq_bytes and cfg_fc_freq_pkts are both 0 in
chdr_stream_output) then the output stream handler will not use flow
control. That is, chdr_stream_output will not expect stream status
updates and will not restrict output packets.
Original-commit: 184999c54f0f30a7952d4e8560b393730c00e353
The asynchronous feedback loop on the err signal causes X to get stuck
on the sum signal when simulating. This change adds a check for
simulation only to force X to 0 so that unknown inputs get resolved
once the inputs are known.
Also added default values to the ports out and strobe_out, since having
them uninitialized and without reset was causing simulation issues in
other modules. The FPGA will initialize them to 0, so this change makes
the code equivalent to real hardware behavior.
Original-commit: b9f7af5807f73a5ac2612ea42ac2b65c26a3bff2
The always(*) block was never executing in some simulators because
there were no signals on the right-hand side in the block. Changing it
to an initial block ensures it always runs.
Original-commit: 0b965d579e2df962b91dac141eef6668f932e992
Removing the FIR filter in the frontend to reclaim resources and remove
redundancy when using a DDC block. The default image has a DDC block,
so only users making custom RFNoC images and using TwinRX will need to
take care to properly downconvert the full bandwidth coming from the
radio block.
Signed-off-by: michael-west <michael.west@ettus.com>
Original-commit: ad533eb6416c76d2a986c97fff846785ee56567e
- 2to3 was used to convert the Python scripts, except where the tool
choked and manual intervention was required
- All references to "python" where replaced with "python3"
- buffer() was replaced by memoryview()
Original-commit: ca68195b5d12c5410cfac8d459a0b0902c4c72c7
Any packet less than CUT_THROUGH bytes has a high chance of getting
stuck in the TX FIFO of the xge_mac_wrapper. In cut-through mode we
were waiting for CUT_THROUGH bytes before transmitting the packet.
Original-commit: 1938bb951a981f4d3016b796f771b5047fb846a2
When operating in cut-through mode the hold off from the MAC was not
applying back pressure, so when the TX interface filled up, data was
dropped. This bug was introduced when cut-through was added, and does
not impact the original implementation.
Original-commit: 6cd9662e2b8f2e159805015f3dd9087089a454af
This renames e31x_rfnoc_image_core.* to e310_rfnoc_image_core.*. This
makes the naming consistent with the rest of the build process (which
uses "e310" for all variants of e31x) and fixes an issue in which the
wrong file name was used by rfnoc_image_builder.
Original-commit: bbd43b16e18ef0a0311ddf4635cbd29c4ac3c367
The DMA FIFO is needed for DDR3 BIST, so it is being restored for now.
Signed-off-by: michael-west <michael.west@ettus.com>
Original-commit: 413ebee61254fd0b9ab0cd11b475b8a849579cd8
Add the Replay RFNoC block to the RFNoC core image for x300, x310, n300,
n310, n320/n321, and e320. The Replay block is contained within its own
static connection, so previous default behavior is still supported.
Signed-off-by: mattprost <matt.prost@ni.com>
Original-commit: 437381bd2cfe137c5e7e2a70aab8226bfb1c70cd
This updates the IO signatures so that all devices and RFNoC blocks use
the same IO signature for the DRAM. This is needed because the IO
signatures must match between the RFNoC blocks and the devices. This
means that some devices have extra bits in the IO signature for the
address, but the extra bits will simply be ignored.
Original-commit: 8f09caaa06725d2364c63ac7cff02f3298895f4a
- Adds test coverage for stream command and status packets
- Cleans up report output during simulation
- Stops clocks at the end of simulation, so chdr_stream_endpoint_tb can
be run directly instead of just chdr_stream_endpoint_all_tb
Original-commit: 97cb396297828f57bba455a275966c58f1abce6e
This updates PkgChdrBfm to correct some errors when modeling stream
command and stream status packets.
- Fix behavior when CHDR_W = 512
- Fix assertions in read_ctrl()
Original-commit: ccf5d1e0a06bf8d46d7bf6dc33a17e3228a1bff4
This changes the behavior of the stream command with the INIT OpCode
such that sending the command with 0 for the values causes no flow
control stream status packets to be sent in response to incoming data.
Original-commit: 7c849afec4dad605ff6f32f7319933f99a4cd1ce
Fixes various synthesis/simulation warnings that were being generated
due to incorrectly sized constants.
Original-commit: 00f683c91486647f1711eb4c0b0a917078d29652
This implements the same change that was made for E31x. The same issue
wasn't reproduced on N3xx, however this change keeps the code
consistent and eliminates the potential for the same problem.
Original-commit: 9c4a23f0a2a2d38ace75e4ab29f6f62f64155d81
This implements the same change that was made for E31x. The same issue
wasn't reproduced on N3xx, however this change keeps the code
consistent and eliminates the potential for the same problem.
Original-commit: e94a209c5b2559348593a6732d694fd49ab59ad0
Fixing an issue in which a very slow radio_clk (due to low sample clock
rate) could cause bus transactions to be issued to the timekeeper
faster than it could service them, resulting in a timeout. This change
replaces RegPort with CtrlPort so that proper flow control can be
maintained to the timekeeper.
Original-commit: 2e910c5307702c3f3efb6dc8cb60f4f71ce11e67
It was set to E320_HG, which is not a valid target, causing build errors
unless -t E320_1G was provided to rfnoc_image_builder.
Original-commit: 9ed42affcaa88e026cb4f82807e69b546ed30c8c
Device was set to e31x, but this is not a valid device type. All e31x
devices use the e310 device type.
Original-commit: 60b76ebb31f9d1672c1b18367346b3fb522e13e9
This change prevents packets from being chopped midway if the
switchboard configuration is changed when a packet is in flight.
Original-commit: f2ec5c91a79cee4c05465349d7e0da865ad1bead
Thange allows the mux to switch cleanly between packets, if the mux
select input is changed while a packet is in flight.
Original-commit: cee09d96aee51795ba2c6578f75f25f30ea11548
Wade Fife