This adds DRAM support to E31x devices. Due to the size of the DDR3
memory controller, it is not enabled by default. You can include the
memory controller IP in the build by adding the DRAM environment
variable to your build. For example:
DRAM=1 make E310_SG3
Original-commit: 788fef11ef890c6dcee3be495fc381bcf2990d3b
Currently, the build process copies the .twr and .syr files into the
build/ process after running ISE. For a succinct utilization report,
those files are not suitable, though, because they contain too much
information.
However, the build process already produces a custom, short utilization
report using grep and a summary of those reports. This patch modifies
the build such that the same output is copied into
a usrp_$product_fpga.rpt file, similar to our gen-3 devices.
Original-commit: 3a9f3204842d9851fef0e87b6b7d27261624a7fc
Previously, when running rfnoc_image_builder, the rfnoc_image_core.vh
file in the main x400 directory was being used instead of the one
generated by rfnoc_image_builder.
Original-commit: 121b6c560cacfb5deacdee664dd1f32cafef7b3d
These pins control hardware-controlled fast-lock for tuning or
cycle-accurate gain control. This commit does nothing to these pins
other than expose them into the design and assign them to zero. This
does not change the current behaviour (the motherboard has pull-downs on
these pins, so they're low by default).
Original-commit: c891f2d8738bc1b73bb92d88623f4760f9e2bd1e
Before this change, only the channel 0 ATR state was sent to the
db_control module. For TwinRX, this had the disadvantage that when only
Channel 1 was used, the FP- and LED-GPIOs could not track the radio's
ATR state (e.g., no LED would light up in this case).
Note that unlike UHD 3, there is only one db_control module per slot.
There are therefore no options to map GPIOs to track the ATR state of an
individual channel.
Original-commit: f23ab72129041777bcd3357a1f4e37b29e62dd86
This commit enables a special personality on the X410 motherboard CPLD required
for NI manufacturing purposes only.
Original-commit: 6fd9f37e1cc16bedaafbbf3f013e78bb4869de6c
This commit refactors the X410's CPLDs build process to make it similar to other
FPGA targets within the repo. The new process relies on basic Quartus build
utilities.
Additionally, this commit adds support for an alternative MAX10 CPLD for the
motherboard CPLD implementation. Both previous (10M04) and new variant
(10M08) are supported concurrently. The images package mapping is updated to
reflect these changes.
Original-commit: e1ce4565dbc7336ee806adce7c087bda4fcc77ae
This sets the ARCH and PART_ID environment variables so that the
selected part family is used for simulations by default. This can be
overridden by changing them in the Makefile for the testbench if a
testbench requires a specific part family. Prior to this change, the
default was always ARCH=kintex7, PART_ID=xc7k410t/ffg900/-2, which
required support for that part to be installed.
Original-commit: c176046dff4941bcec27b0b72e5a68264c4808e5
Reconnect the signals from the White Rabbit module to the TDC in the
FPGA.
Signed-off-by: michael-west <michael.west@ettus.com>
Original-commit: c0637bae1e4a0ddb996cf2b7eadfad22f782874b
White Rabbit is not supported in X410, however the register map included an
incorrect reference to this unsupported feature.
This commit removes the WR reference from both the source and html files.
Original-commit: 7edd92dbcf2da1a1c0fabe02a97fdb6afdc89077
Update rfnoc_image_core.v to take into account the new image_core_name
fields and version strings. Add new rfnoc_image_core.vh. Update YAML
where needed.
Original-commit: b0033158a4c520063540881451d8daac91e98714
Change version from a numeric to a string, in order to
differentiate between versions like "1.1" and "1.10".
Original-commit: ca21048bd2f832b20bb36763f76d46b861b697a5
This renames e31x_rfnoc_image_core.* to e310_rfnoc_image_core.*. This
makes the naming consistent with the rest of the build process (which
uses "e310" for all variants of e31x) and fixes an issue in which the
wrong file name was used by rfnoc_image_builder.
Original-commit: bbd43b16e18ef0a0311ddf4635cbd29c4ac3c367
The DMA FIFO is needed for DDR3 BIST, so it is being restored for now.
Signed-off-by: michael-west <michael.west@ettus.com>
Original-commit: 413ebee61254fd0b9ab0cd11b475b8a849579cd8
Add the Replay RFNoC block to the RFNoC core image for x300, x310, n300,
n310, n320/n321, and e320. The Replay block is contained within its own
static connection, so previous default behavior is still supported.
Signed-off-by: mattprost <matt.prost@ni.com>
Original-commit: 437381bd2cfe137c5e7e2a70aab8226bfb1c70cd
Wade Fife