This change causes HLS IP to be exported with a version of 1.0.0
instead of a date code. Due to a bug in Vivado, date codes after
0x7FFFFFFF (anything in 2022 or beyond) cause an error. Setting
an explicit revision avoids this issue.
See Xilinx AR 76960 for details.
Original-commit: 51384afc2c5d4db9e2e45d97382edce8c8039b10
Previously, when running rfnoc_image_builder, the rfnoc_image_core.vh
file in the main x400 directory was being used instead of the one
generated by rfnoc_image_builder.
Original-commit: 121b6c560cacfb5deacdee664dd1f32cafef7b3d
These pins control hardware-controlled fast-lock for tuning or
cycle-accurate gain control. This commit does nothing to these pins
other than expose them into the design and assign them to zero. This
does not change the current behaviour (the motherboard has pull-downs on
these pins, so they're low by default).
Original-commit: c891f2d8738bc1b73bb92d88623f4760f9e2bd1e
Some comments describing data flow direction were wrong. This commit
updates the Mako files and updates the noc_shell modules with newly
generated versions.
Original-commit: 270a7e13c365d05ba04ab44a2f844d96ba15f43b
Before this change, only the channel 0 ATR state was sent to the
db_control module. For TwinRX, this had the disadvantage that when only
Channel 1 was used, the FP- and LED-GPIOs could not track the radio's
ATR state (e.g., no LED would light up in this case).
Note that unlike UHD 3, there is only one db_control module per slot.
There are therefore no options to map GPIOs to track the ATR state of an
individual channel.
Original-commit: f23ab72129041777bcd3357a1f4e37b29e62dd86
This commit enables a special personality on the X410 motherboard CPLD required
for NI manufacturing purposes only.
Original-commit: 6fd9f37e1cc16bedaafbbf3f013e78bb4869de6c
This commit refactors the X410's CPLDs build process to make it similar to other
FPGA targets within the repo. The new process relies on basic Quartus build
utilities.
Additionally, this commit adds support for an alternative MAX10 CPLD for the
motherboard CPLD implementation. Both previous (10M04) and new variant
(10M08) are supported concurrently. The images package mapping is updated to
reflect these changes.
Original-commit: e1ce4565dbc7336ee806adce7c087bda4fcc77ae
Added registers to read back radio time. Bumped minor compat.
Signed-off-by: michael-west <michael.west@ettus.com>
Original-commit: 43ab4c8b43d8407fc9f345ca4b13634f03ad4a43
The I and Q were swapped in sine_tone, which caused confusion and made
the rotation of REG_CARTESIAN clockwise by default. This effectively
made the resulting frequency negative. This PR makes the I and Q order
consistent with RFNoC and fixes the direction of rotation so that a
positive value for REG_PHASE_INC (phase increment) results in a
counter-clockwise rotation, which yields a positive frequency.
Original-commit: 4e6531f30648ede5be8f93fa49fdcd4973b73813
Updates the language in setupenv.sh --help to better reflect that there
are many locations where Vivado is searched.
Original-commit: e64d3e28316f642c1203722b6f5f2af710a7e281
This adds a Verilog definition named `UHD_FPGA_DIR that corresponds to
the location of the UHD "fpga" directory. This allows you to include
files in your out-of-tree modules relative to the FPGA directory. For
example, you could include the library header file rfnoc_chdr_utils.vh
using the following:
`include `"`UHD_FPGA_DIR/usrp3/lib/rfnoc/core/rfnoc_chdr_utils.vh`"
Some simulators may not support `" outside of the context of a `define,
in which case you can do the following:
`define RFNOC_CHDR_UTILS_PATH \
`"`UHD_FPGA_DIR/usrp3/lib/rfnoc/core/rfnoc_chdr_utils.vh`"
`include `RFNOC_CHDR_UTILS_PATH
Original-commit: 66267f515802ff3f965fd44e1f0d3097ada7484f
This sets the ARCH and PART_ID environment variables so that the
selected part family is used for simulations by default. This can be
overridden by changing them in the Makefile for the testbench if a
testbench requires a specific part family. Prior to this change, the
default was always ARCH=kintex7, PART_ID=xc7k410t/ffg900/-2, which
required support for that part to be installed.
Original-commit: c176046dff4941bcec27b0b72e5a68264c4808e5
The script was previously only Python 2 compatible.
Python 2 support is now removed, so we don't maintain backwards
compatibility with Python 2.
This also fixes all linter warnings.
Original-commit: 6046e1a812ba2065d6ae13b4c4afdce8abc99d4f
Modified to send 2 packets back to back at each packet size to test
output during sequential input packets. Also fixed whitespace.
Signed-off-by: michael-west <michael.west@ettus.com>
Original-commit: 439770b964be45e6160cf99a0b1551fdd2002fa9
Wade Fife