This change fixes the case where CHDR_W < ITEM_W*NIPC.
It also adds a state machine to stall the input to the pyld_fifo to
ensure that the pkt_info_fifo will not overflow. Previously in some
cases it allowed the same word to be inserted into the pyld_fifo
multiple times.
Original-commit: b862eda69cf41c7044a1805324f2fcfef5b0ba3d
- Made some things optional to reduce logic when
used with the new xport_sv:
(1) Clocking to sys_clk
(2) Preamble insertion
- New options to CUTTHROUGH faster on the TX path.
The new xport_sv already has a gate to accumulate at
its clock crossing.
Original-commit: a68e7101167a4b5bf7b60ed90d963982aae735b8
This fixes a bug on wrstb in AxiLiteIf and adds a new AxiLiteIf_v that
can be used to stitch onto Verilog port_maps.
Original-commit: 6ef642e3ac44c52b98b124f30dc84b1683859989
This module takes an AXI-Stream without TLAST and outputs the
same AXI-Stream with TLAST based on the provided packet size
input.
Original-commit: b0b3849a18e1f2d3cb255a507b01ac5e7a9416a0
This updates the makefiles for the testbenches so they can be run using
"make modelsim" without any additional hacks. The "xsim" and "vsim"
simulation targets also still work.
Original-commit: e962cc4a5e51e2326eb656ee2a779ea26774687b
The rnfoc/xport section is refactored in System Verilog to allow the
following improvements
(1) CPU_W - Sets the size of the c2e and e2c pipes. This can be run
at a different clock rate than the main ethernet pipe
(2) CHDR_W - Sets the size of the v2e and e2v pipes. This can be run
at a different clock rate than the main ethernet pipe
(3) ENET_W - Sets the size of the eth_tx and eth_rx pipes.
eth_interface_tb runs traffic from e2c,e2v,v2e,c2e simultaneously
against the original xport_sv implementation, and against the new
implementation with widths of 64/128/512. A chdr_management node
info request queries the port info of the node0 in the eth_interface.
eth_ifc_synth_test.sv can be compiled with the make xsim target to test
out the size of various configurations.
Original-commit: eed4988cc266a63370a4332351d02fadedde3a3b
Contains a fix for the AXI4LITE_ASSIGN macro, and adds
AXI4LITE_PORT_ASSIGN, AXI4LITE_PORT_ASSIGN_NR, and
AXI4LITE_DEBUG_ASSIGN macros.
Original-commit: c718faf3387a07a9a1b86ab473f6ed7ac4cb493a
Components are connected together with AxiStreamIfc. Some features
include:
(1) Add bytes to the start of a packet
(2) Remove bytes from a packet
(3) Wrappers for some older components
a. fifo - buffer but imediately pass a packet
b. packet_gate - buffer and hold till end of packet
c. width_conv - cross clock domains and change width of axi bus
The AxiStreamIf was moved from PkgAxiStreamBfm to its own file. It can
be used to connect to ports with continuous assignment.
AxiStreamPacketIf must be used procedurally but allows the following
new methods:
- reached_packet_byte - notify when tdata contains a paritcular byte
- get_packet_byte/get_packet_field - extract a byte or field from axi
- put_packet_byte/put_packet_field - overwrite a byte or field onto axi
Original-commit: c3bca6c87700054c96320de119a58f6a688dbd5a
(1) Synthesizable AxiLiteIf
(2) Simulation model for AxiLite contains an AxiLiteTransaction class
and an AxiLiteBfm class.
Important Methods
a. wr - performs non-blocking write and checks for expected response
b. wr_block - performs a blocking write and provides response
c. rd - performs a non-blocking read and checks for expected response
d. rd_block - persforms a blocking read and provides response
The model allows parallel execution of reads and writes, but enforces
rd and write ordering when using the above methods. When transactions
are posted directly, ordering is not guaranteed, and reads and writes
are put on the interface immediately.
Original-commit: afee1888dd7c2d9d95e537f505ce7ab36252763a
Adds LATENCY parameter to control the ammount of pieplineing. Adds a
clock enable to control the advance of the pipeline.
Used in xport when calculating new UDP headers for CHDR traffic.
Original-commit: dd9847c5c3c3fac17658b526a7d8894711af086e
This fixes the rfnoc_null_src_sink, chdr_crossbar_nxn, and
chdr_stream_endpoint blocks so that wider CHDR widths are properly
supported. It also updates PkgChdrBfm to able to properly test these
blocks. The testbenches have been updated to test both 64 and 512-bit
widths.
Original-commit: 3af8dcaacfa4bf36dcae3bdbf0b353385b7063c6
The existing SPI core (simple_spi_slave.v) was limited to 32 bit. This
commit adds a second spi core with capability to transfer up to 64 bits
while keeping the same amount of resources when using generic setting
MAX_BITS = 32. Furthermore, the new module aligns mosi and miso with the
edges of sclk. The register stages were not aligned in the existing
version.
Original-commit: 366cab1fef44f1132a2acf8046ecaeac80793ccc
Previously, if a write occurred before the FIFO was ready then a
write could hang as the data channel would complete but leave the
address channel in a state where it would never complete. The fix is
to hold off acknowledging on the data channel until the FIFO is ready.
Original-commit: 3f6ad749b06094b0e16b412a791ba3f2ac509600
Add DEFAULT_M and DEFAULT_N parameters for rate changing cores.
This allows the host to not need to configure fixed rate change
cores.
Original-commit: 983fad664436301c31c3bc8c81b538a41537598b
The decimation in the rx_frontend_gen3 was added to reduce the bandwidth
between the Radio and the DDC due to the limitation in bandwidth over
the crossbar for dynamically connected blocks. The default FPGA image
for the X300 now has a static connection between the Radio and DDC, so
this is no longer necessary.
This change allows the TwinRX receive channels to be time aligned with
channels from other daughterboards so they can be used in the same
streamer.
Signed-off-by: Michael West <michael.west@ettus.com>
Original-commit: d0c162bc7a4ac82f6104506b17d7be05e1780336
Sets time increment based on tick rate and sample rate instead of
assuming one tick per sample. Defaults to legacy behavior.
Minor compat number bumped on DUC and DDC blocks.
Signed-off-by: Michael West <michael.west@ettus.com>
Original-commit: 12dfb97c8efce40494efb35bdd81d06b6f8b9b62
The axis_data_to_chdr block previously only sampled the sideband
information at the end of the packet. This adds a parameter that
controls if the sideband information should be sampled at the beginning
of the packet or the end of the packet. In the former case, large
internal packet buffers are not required.
Original-commit: a8c4f021277cf3b0a0897fa9da0252541512f3a6
The axis_split module takes a single AXI-Stream input and duplicates it
onto multiple AXI-Stream outputs. This block correctly handles the
somewhat tricky flow-control logic so that the AXI-Stream handshake
protocol is honored at all top-level ports.
Original-commit: fa0f4b2833119d57d331f592028ff9f032895c89
The latency through the combiner is static if only one master interface
is used and PRIORITY=1 is set.
Original-commit: 4e3650c0d7ac9bea3720151fbb23591f187590c7
This adds variants of the send and recv methods in RfnocBlockCtrlBfm
and ChdrIfaceBfm that input/output items instead of CHDR words.
Original-commit: aebcaea5eb4e28c5c2a1c78b5e8dd42e5d1247b6
This replaces chdr_word_t, which was a statically defined 64-bit data
type, with a paramaterizable data type that matches the defined CHDR_W.
Code that formerly referenced the chdr_word_t data type can now define
the data type for their desired CHDR_W and ITEM_W as follows:
// Define the CHDR word and item/sample data types
typedef ChdrData #(CHDR_W, ITEM_W)::chdr_word_t chdr_word_t;
typedef ChdrData #(CHDR_W, ITEM_W)::item_t item_t;
ITEM_W is optional when defining chdr_word_t if items are not
needed. Static methods in the ChdrData class also provide the ability to
convert between CHDR words and data items. For example:
// Convert CHDR data buffer to a buffer of samples
samples = ChdrData#(CHDR_W, ITEM_W)::chdr_to_item(data);
Original-commit: fc895feacb8dde3b02c9a4eccb4b4f4a654f2881
This changes the for loop to use the generate keyword, making it
compatible with Verilog 2001. This allows tools that only support
Verilog 2001 to use this file (e.g., Intel Quartus).
Original-commit: b92597e1c9b6f09d5e62e55a60e33c04d437a50a
This eliminates the complicated semaphore from the testbench and brings
the radio testbench in line with the other testbenches.
Original-commit: 8727642de2aa22e982e012d85d32325f664a3e9e
Wade Fife