This updates the RFNoC image cores to separate the two DRAM banks on
X4xx by splitting them into "dram0" and "dram1". Previously, both DRAM
banks shared the same DRAM port, named "dram", which created some
confusion.
The Replay block has also been duplicated in the bitstreams that use
both banks, so we now have one Replay block per bank.
Original-commit: b5cfab8922e5b3f4ff13a8a64e8b0319876f13db
This adds support for the X440_X4_200 variant which supports up to
200 MHz bandwidth (250 Msps), has a DDC and DUC on each channel,
4 x 10 GbE interfaces, and no DRAM.
Original-commit: bdaba58750ce0c2ccc58769936c3c5c4a6b2d2cf
FPGA:
- Split up MB registers that control daughterboard specific settings so
that daughterboards 0 and 1 could have different setings, in
preparation for future devices that require different settings.
This requires a compat number bump to 8.0.
- Add registers for additional RFDC information, including the
block/tile mapping of the individual channels, and information about
resampling capabilities
- Identify sections of code that would be specific to X410/ZBX and move
them to their own headers, so it's trivial to add device-specific
sections of code instead for other devices in the future.
- This includes constraints for clocks and I/O pins.
- Remove ability to do timed ctrlport transactions to the MB CPLD, this
was unused and possibly broken.
- Move daughterboard-specific code into its own code location
(dboards/zbx)
- Move X410-specific register documentation to its own location
(doc/X410)
- Refactor Makefiles to split out X410/ZBX specific components and allow
switching between device types
- Add 512-bit AXI interconnects
- Make number of timekeepers configurable (X410 keeps the single
timekeeper)
MPM:
- Required compat is bumped to 8.0
- Now supports new registers for detecting DSP capabilities and
multi-rate settings for the daughterboards
- Adds MMCM controls (currently unused)
Co-authored-by: Wade Fife <wade.fife@ni.com>
Co-authored-by: Ryan Marlow <ryan@lmarlow.com>
Co-authored-by: Martin Braun <martin.braun@ettus.com>
Co-authored-by: Humberto Jimenez <humberto.jimenez@ni.com>
Original-commit: c1d268917ea65dd9c5a42366014cb96d3c025223
Moves X4C_100, X4C_200, C1_100, and C1_200 from experimental to
available targets and makes the needed changes to allow them to build
successfully.
Adds support for "UC" FPGA variant. U indicates that QSFP0 is unused
and C indicates that QSFP1 is 100 GbE.
Adds experimental CG_200 variant.
Original-commit: cb9609c886b156e22ae9d879fffad8d060f2ca2d
Adds a BUILD_BASE_DIR makefile variable that allows you to specify the
base directory for FPGA build outputs. This allows you to put the
output from each run of make into a unique directory, or to run
multiple instances of make in parallel with each build's output being
put in a different directory. For example:
make X310_XG BUILD_BASE_DIR=/path/to/builds
Original-commit: bc6db8409ba756bbad0d0c158ffb00c614b58fd9
Adds a BUILD_SEED make variable that can be set to a 32-bit integer,
and adds an FPGA read-only register initialized by this variable.
Changing this variable will randomly affect the FPGA build results.
This can be useful when your build fails timing by a small amount,
allowing you to build again and get different results with the same
code.
For example, you could run the following to produce an FPGA build with
different timing results from the default build:
make X310_XG BUILD_SEED=123
Original-commit: 3a3a03486f9221c2e59fa6d0826c23d17730956d
This adds the ability to do IP generation and FPGA builds using the
--jobs (-j) option with Make. For example, rather than generating each
IP one after another, you can generate up to N at a time using N Vivado
instances. This greatly reduces the IP generation time. Similarly,
parallel jobs can be used to easily build different FPGA variants
simultaneously.
Because FPGA builds can consume a lot of memory, care must be taken to
ensure that the number of jobs is not too high for the amount of memory
available.
New IP make targets were added for each USRP so that IP can be built
separately from the FPGA. The IP targets are now a dependency on each
FPGA target.
For example, you can generate the IP for X310 using 4 parallel jobs
using the following command:
make -j4 X310_IP
Or, build two X310 bitstreams simultaneously:
make -j2 X310_XG X310_HG
Original-commit: 4b03e237a96ee277eefff257d65b08708c38662c
Max Köhler