fpga: x400: cpld: Add support for X410 motherboard CPLD

Co-authored-by: Humberto Jimenez <humberto.jimenez@ni.com>
Co-authored-by: Javier Valenzuela <javier.valenzuela@ni.com>


Original-commit: 7015f5ed2d495f3908773b7c7d74864d0cc3871a

top/x400/cpld/pwr_supply_clk_gen.v

@@ -0,0 +1,73 @@
+//
+// Copyright 2021 Ettus Research, A National Instruments Brand
+//
+// SPDX-License-Identifier: LGPL-3.0-or-later
+//
+// Module: pwr_supply_clk_gen
+//
+// Description:
+//
+//   Generates a clock for one motherboard power supply.
+//
+// Parameters:
+//
+//   BASE_ADDRESS  : Base address for CtrlPort registers.
+//   NUM_ADDRESSES : Number of bytes of address space to use.
+//
+
+`default_nettype none
+
+
+module pwr_supply_clk_gen#(
+  parameter SOURCE_CLK_FREQ = 100_000_000,
+  parameter TARGET_CLK_FREQ =     100_000
+) (
+  // Base clock and reset
+  input wire clk,
+  input wire rst,
+
+  // Power supply clocks
+  output reg pwr_supply_clk
+);
+
+//-----------------------------------------------------------------------------
+// Counter Calculation / Definition
+//-----------------------------------------------------------------------------
+// Counter to generate the power supply switching clock
+
+// Assumption: the ratio between the generated clock and the source clock is
+//             even, therefore we can produce a 50% DC clock output.
+localparam MAX_COUNT = SOURCE_CLK_FREQ / TARGET_CLK_FREQ / 2;
+localparam COUNTER_W = $clog2(MAX_COUNT);
+reg [COUNTER_W-1:0] counter = 0;
+
+//-----------------------------------------------------------------------------
+// Clock Generation
+//-----------------------------------------------------------------------------
+// This process implements a simple clock divider for the power supply
+// switcher.
+
+// SAFE COUNTER START! rst is a synchronous reset generated in the
+// clk domain; therefore, inherently safe.
+always @(posedge clk) begin
+  if (rst) begin
+    counter <= 0;
+    pwr_supply_clk <= 1'b0;
+  end
+  else begin
+    // Add one every cycle to the counter
+    counter <= counter + 1'b1;
+
+    // When the counter reaches its mid value, it is reset and the output clock
+    // output is toggled.
+    if (counter == MAX_COUNT-1) begin
+      counter <= 0;
+      pwr_supply_clk <= ~pwr_supply_clk;
+    end
+  end
+end
+
+endmodule
+
+
+`default_nettype wire