Files
b210-k7-fpga/lib/rfnoc/xport/eth_ipv4_chdr64_dispatch.v
T
+18 6b67702ad7 Merge FPGA repository back into UHD repository
The FPGA codebase was removed from the UHD repository in 2014 to reduce
the size of the repository. However, over the last half-decade, the
split between the repositories has proven more burdensome than it has
been helpful. By merging the FPGA code back, it will be possible to
create atomic commits that touch both FPGA and UHD codebases. Continuous
integration testing is also simplified by merging the repositories,
because it was previously difficult to automatically derive the correct
UHD branch when testing a feature branch on the FPGA repository.

This commit also updates the license files and paths therein.

We are therefore merging the repositories again. Future development for
FPGA code will happen in the same repository as the UHD host code and
MPM code.

== Original Codebase and Rebasing ==

The original FPGA repository will be hosted for the foreseeable future
at its original local location: https://github.com/EttusResearch/fpga/

It can be used for bisecting, reference, and a more detailed history.

The final commit from said repository to be merged here is
05003794e2da61cabf64dd278c45685a7abad7ec. This commit is tagged as
v4.0.0.0-pre-uhd-merge.

If you have changes in the FPGA repository that you want to rebase onto
the UHD repository, simply run the following commands:

- Create a directory to store patches (this should be an empty
  directory):

    mkdir ~/patches

- Now make sure that your FPGA codebase is based on the same state as
  the code that was merged:

    cd src/fpga # Or wherever your FPGA code is stored
    git rebase v4.0.0.0-pre-uhd-merge

  Note: The rebase command may look slightly different depending on what
  exactly you're trying to rebase.

- Create a patch set for your changes versus v4.0.0.0-pre-uhd-merge:

    git format-patch v4.0.0.0-pre-uhd-merge -o ~/patches

  Note: Make sure that only patches are stored in your output directory.
  It should otherwise be empty. Make sure that you picked the correct
  range of commits, and only commits you wanted to rebase were exported
  as patch files.

- Go to the UHD repository and apply the patches:

    cd src/uhd # Or wherever your UHD repository is stored
    git am --directory fpga ~/patches/*
    rm -rf ~/patches # This is for cleanup

== Contributors ==

The following people have contributed mainly to these files (this list
is not complete):

Co-authored-by: Alex Williams <alex.williams@ni.com>
Co-authored-by: Andrej Rode <andrej.rode@ettus.com>
Co-authored-by: Ashish Chaudhari <ashish@ettus.com>
Co-authored-by: Ben Hilburn <ben.hilburn@ettus.com>
Co-authored-by: Ciro Nishiguchi <ciro.nishiguchi@ni.com>
Co-authored-by: Daniel Jepson <daniel.jepson@ni.com>
Co-authored-by: Derek Kozel <derek.kozel@ettus.com>
Co-authored-by: EJ Kreinar <ej@he360.com>
Co-authored-by: Humberto Jimenez <humberto.jimenez@ni.com>
Co-authored-by: Ian Buckley <ian.buckley@gmail.com>
Co-authored-by: Jörg Hofrichter <joerg.hofrichter@ni.com>
Co-authored-by: Jon Kiser <jon.kiser@ni.com>
Co-authored-by: Josh Blum <josh@joshknows.com>
Co-authored-by: Jonathon Pendlum <jonathan.pendlum@ettus.com>
Co-authored-by: Martin Braun <martin.braun@ettus.com>
Co-authored-by: Matt Ettus <matt@ettus.com>
Co-authored-by: Michael West <michael.west@ettus.com>
Co-authored-by: Moritz Fischer <moritz.fischer@ettus.com>
Co-authored-by: Nick Foster <nick@ettus.com>
Co-authored-by: Nicolas Cuervo <nicolas.cuervo@ettus.com>
Co-authored-by: Paul Butler <paul.butler@ni.com>
Co-authored-by: Paul David <paul.david@ettus.com>
Co-authored-by: Ryan Marlow <ryan.marlow@ettus.com>
Co-authored-by: Sugandha Gupta <sugandha.gupta@ettus.com>
Co-authored-by: Sylvain Munaut <tnt@246tNt.com>
Co-authored-by: Trung Tran <trung.tran@ettus.com>
Co-authored-by: Vidush Vishwanath <vidush.vishwanath@ettus.com>
Co-authored-by: Wade Fife <wade.fife@ettus.com>


Original-commit: bafa9d95453387814ef25e6b6256ba8db2df612f
2020-01-28 09:35:36 -08:00

473 lines
16 KiB
Verilog

//
// Copyright 2019 Ettus Research, A National Instruments Company
//
// SPDX-License-Identifier: LGPL-3.0-or-later
//
// Module: eth_ipv4_chdr64_dispatch
// Description:
// This module serves as an Ethernet endpoint for CHDR traffic.
// Ethernet frames arrive on the s_mac port where they are
// inspected and classified as CHDR or !CHDR. A frame contains
// CHDR payload if it is addressed to us (Eth and IP), is a UDP
// packet and the destination port is one of the CHDR ports.
// The UDP payload for CHDR frame is sent out of the m_chdr port
// in addition to source information for Eth, IP and UDP. All
// other traffic address to us (Eth) is sent to the m_cpu port.
// Traffic not addressed (Eth) to us is dropped.
//
// Parameters:
// - DROP_UNKNOWN_MAC: Drop packets not addressed to us?
//
// Signals:
// - s_mac_*: The input Ethernet stream from the MAC (plus tuser for trailing bytes + err)
// The tuser bits are the values defined in xge_mac_wrapper. Most
// relevant is tuser[3], which signals a bad packet that must be
// dropped.
// - m_chdr_*: The output CHDR stream to the rfnoc infrastructure
// - m_cpu_*: The output Ethernet stream to the CPU (plus tuser for trailing bytes + err)
// - my_eth_addr: The Ethernet (MAC) address of this endpoint
// - my_ipv4_addr: The IPv4 address of this endpoint
// - my_udp_chdr_port: The UDP port allocated for CHDR traffic on this endpoint
//
`default_nettype none
module eth_ipv4_chdr64_dispatch #(
parameter [0:0] DROP_UNKNOWN_MAC = 1
)(
// Clocking and reset interface
input wire clk,
input wire rst,
// Input 68bit AXI-Stream interface (from MAC)
input wire [63:0] s_mac_tdata,
input wire [3:0] s_mac_tuser,
input wire s_mac_tlast,
input wire s_mac_tvalid,
output wire s_mac_tready,
// Output AXI-Stream interface to CHDR infrastructure
output wire [63:0] m_chdr_tdata,
output wire [95:0] m_chdr_tuser,
output wire m_chdr_tlast,
output wire m_chdr_tvalid,
input wire m_chdr_tready,
// Output AXI-Stream interface to CPU
output wire [63:0] m_cpu_tdata,
output wire [3:0] m_cpu_tuser,
output wire m_cpu_tlast,
output wire m_cpu_tvalid,
input wire m_cpu_tready,
// Device addresses
input wire [47:0] my_eth_addr,
input wire [31:0] my_ipv4_addr,
input wire [15:0] my_udp_chdr_port
);
//---------------------------------------
// Ethernet/IP/UDP Magic Numbers
//---------------------------------------
localparam [47:0] ETH_ADDR_BCAST = {48{1'b1}};
localparam [15:0] ETH_TYPE_IPV4 = 16'h0800;
localparam [7:0] IPV4_PROTO_UDP = 8'h11;
//---------------------------------------
// Byte-swapping function
//---------------------------------------
function [15:0] bswap16(
input [15:0] din
);
begin
bswap16 = {din[0 +: 8], din[8 +: 8]};
end
endfunction
function [31:0] bswap32(
input [31:0] din
);
begin
bswap32 = {din[0 +: 8], din[8 +: 8],
din[16+: 8], din[24+: 8]};
end
endfunction
//---------------------------------------
// Input pipeline stage
//---------------------------------------
wire [63:0] in_tdata;
wire [3:0] in_tuser;
wire in_tlast, in_tvalid;
reg in_tready;
wire [63:0] cpu_tdata;
wire [3:0] cpu_tuser;
reg cpu_tlast, cpu_terror, cpu_tvalid;
wire cpu_tready;
wire [63:0] chdr_tdata;
wire [95:0] chdr_tuser;
wire chdr_tlast, chdr_tvalid, chdr_tready;
wire chdr_terror;
axi_fifo #(
.WIDTH(64+4+1),.SIZE(1)
) in_reg_i (
.clk(clk), .reset(rst), .clear(1'b0),
.i_tdata({s_mac_tlast, s_mac_tuser, s_mac_tdata}),
.i_tvalid(s_mac_tvalid), .i_tready(s_mac_tready),
.o_tdata({in_tlast, in_tuser, in_tdata}),
.o_tvalid(in_tvalid), .o_tready(in_tready),
.space(), .occupied()
);
//---------------------------------------
// Classification state machine
//---------------------------------------
localparam [3:0] ST_IDLE_ETH_L0 = 4'd0;
localparam [3:0] ST_ETH_L1 = 4'd1;
localparam [3:0] ST_ETH_L2_IPV4_L0 = 4'd2;
localparam [3:0] ST_IPV4_L1 = 4'd3;
localparam [3:0] ST_IPV4_L2 = 4'd4;
localparam [3:0] ST_IPV4_UDP_HDR = 4'd5;
localparam [3:0] ST_FWD_CHDR = 4'd6;
localparam [3:0] ST_FWD_CPU = 4'd7;
localparam [3:0] ST_DROP_PKT = 4'd8;
// State info
reg [3:0] state = ST_IDLE_ETH_L0;
reg discard_cpu_pkt = 1'b0;
// Cached fields
reg [47:0] eth_dst_addr_cached, eth_src_addr_cached;
reg [31:0] ipv4_src_addr_cached;
reg [15:0] udp_src_port_cached;
always @(posedge clk) begin
if (rst) begin
state <= ST_IDLE_ETH_L0;
discard_cpu_pkt <= 1'b0;
end else if (in_tvalid && in_tready) begin
case (state)
// Idle or First line of Eth frame
// ----------------------------------
// | DstMAC_HI (16) | Preamble (48) |
// ----------------------------------
ST_IDLE_ETH_L0: begin
discard_cpu_pkt <= 1'b0;
if (!in_tlast) begin
// Just cache addresses. No decisions to be made.
eth_dst_addr_cached[47:32] <= bswap16(in_tdata[48 +: 16]);
if (in_tuser[3]) begin
state <= ST_DROP_PKT;
discard_cpu_pkt <= 1'b1;
end else begin
state <= ST_ETH_L1;
end
end else begin
// Short packet: Violates min eth size of 64 bytes
state <= ST_IDLE_ETH_L0;
end
end
// Second line of Eth frame
// -----------------------------------
// | SrcMAC_HI (32) | DstMAC_LO (32) |
// -----------------------------------
ST_ETH_L1: begin
if (!in_tlast) begin
// Just cache addresses. No decisions to be made.
eth_dst_addr_cached[31:0] <= bswap32(in_tdata[0 +: 32]);
eth_src_addr_cached[47:16] <= bswap32(in_tdata[32 +: 32]);
if (in_tuser[3]) begin
state <= ST_DROP_PKT;
discard_cpu_pkt <= 1'b1;
end else begin
state <= ST_ETH_L2_IPV4_L0;
end
end else begin
// Short packet: Violates min eth size of 64 bytes
state <= ST_IDLE_ETH_L0;
end
end
// End Eth frame and start of IP
// --------------------------------------------------
// | IPv4_Line0 (32)| EthType (16) | SrcMAC_LO (16) |
// --------------------------------------------------
ST_ETH_L2_IPV4_L0: begin
if (!in_tlast) begin
eth_src_addr_cached[15:0] <= bswap16(in_tdata[0 +: 16]);
if (in_tuser[3]) begin
state <= ST_DROP_PKT;
discard_cpu_pkt <= 1'b1;
end else if (eth_dst_addr_cached == ETH_ADDR_BCAST) begin
// If Eth destination is bcast then fwd to CPU
state <= ST_FWD_CPU;
end else if (eth_dst_addr_cached != my_eth_addr && DROP_UNKNOWN_MAC) begin
// If Eth destination is not us then drop the packet
state <= ST_DROP_PKT;
discard_cpu_pkt <= 1'b1;
end else if (bswap16(in_tdata[16 +: 16]) != ETH_TYPE_IPV4) begin
// If this is not an IPv4 frame then fwd to CPU
state <= ST_FWD_CPU;
end else begin
// Otherwise continue classification
// We know this is an IPv4 frame
state <= ST_IPV4_L1;
end
end else begin
// Short packet: Violates min eth size of 64 bytes
state <= ST_IDLE_ETH_L0;
end
end
// Continue IPv4 header
// -------------------------------------
// | IPv4_Line2 (32) | IPv4_Line1 (32) |
// -------------------------------------
ST_IPV4_L1: begin
if (!in_tlast) begin
if (in_tuser[3]) begin
state <= ST_DROP_PKT;
discard_cpu_pkt <= 1'b1;
end else if (in_tdata[40 +: 8] != IPV4_PROTO_UDP) begin
// If this is not a UDP frame then fwd to CPU
state <= ST_FWD_CPU;
end else begin
// Otherwise continue classification
// We know this is a UDP frame
state <= ST_IPV4_L2;
end
end else begin
// Short packet: Violates min eth size of 64 bytes
state <= ST_IDLE_ETH_L0;
end
end
// Continue IPv4 header
// -----------------------------------
// | IPDstAddr (32) | IPSrcAddr (32) |
// -----------------------------------
ST_IPV4_L2: begin
if (!in_tlast) begin
ipv4_src_addr_cached <= bswap32(in_tdata[0 +: 32]);
if (in_tuser[3]) begin
state <= ST_DROP_PKT;
discard_cpu_pkt <= 1'b1;
end else if (bswap32(in_tdata[32 +: 32]) != my_ipv4_addr) begin
// If IPv4 destination is not us then fwd to CPU
state <= ST_FWD_CPU;
end else begin
// Otherwise continue classification
// We know this is a UDP frame for us
state <= ST_IPV4_UDP_HDR;
end
end else begin
// Short packet: Violates min eth size of 64 bytes
state <= ST_IDLE_ETH_L0;
end
end
// UDP header
// -----------------------------------------------------------
// | Chksum (16) | Length (16) | DstPort (16) | SrcPort (16) |
// -----------------------------------------------------------
ST_IPV4_UDP_HDR: begin
if (!in_tlast) begin
udp_src_port_cached <= bswap16(in_tdata[0 +: 16]);
if (in_tuser[3]) begin
state <= ST_DROP_PKT;
discard_cpu_pkt <= 1'b1;
end else if (bswap16(in_tdata[16 +: 16]) == my_udp_chdr_port) begin
// The UDP port matches CHDR port
state <= ST_FWD_CHDR;
discard_cpu_pkt <= 1'b1;
end else begin
// Not the CHDR port. Forward to CPU
state <= ST_FWD_CPU;
end
end else begin
// Short packet: Violates min eth size of 64 bytes
state <= ST_IDLE_ETH_L0;
end
end
// CHDR Payload
ST_FWD_CHDR: begin
discard_cpu_pkt <= 1'b0;
if (in_tlast)
state <= ST_IDLE_ETH_L0;
end
// NotCHDR Payload: Send to CPU
ST_FWD_CPU: begin
if (in_tlast)
state <= ST_IDLE_ETH_L0;
end
// Unwanted Payload: Drop
ST_DROP_PKT: begin
discard_cpu_pkt <= 1'b0;
if (in_tlast)
state <= ST_IDLE_ETH_L0;
end
// We should never get here
default: begin
state <= ST_IDLE_ETH_L0;
end
endcase
end
end
always @(*) begin
case (state)
ST_IDLE_ETH_L0: begin
in_tready = cpu_tready;
cpu_tvalid = in_tvalid;
cpu_tlast = in_tlast;
cpu_terror = in_tlast; // Illegal short packet: Drop it
end
ST_ETH_L1: begin
in_tready = cpu_tready;
cpu_tvalid = in_tvalid;
cpu_tlast = in_tlast;
cpu_terror = in_tlast; // Illegal short packet: Drop it
end
ST_ETH_L2_IPV4_L0: begin
in_tready = cpu_tready;
cpu_tvalid = in_tvalid;
cpu_tlast = in_tlast;
cpu_terror = in_tlast; // Illegal short packet: Drop it
end
ST_IPV4_L1: begin
in_tready = cpu_tready;
cpu_tvalid = in_tvalid;
cpu_tlast = in_tlast;
cpu_terror = in_tlast; // Illegal short packet: Drop it
end
ST_IPV4_L2: begin
in_tready = cpu_tready;
cpu_tvalid = in_tvalid;
cpu_tlast = in_tlast;
cpu_terror = in_tlast; // Illegal short packet: Drop it
end
ST_IPV4_UDP_HDR: begin
in_tready = cpu_tready;
cpu_tvalid = in_tvalid;
cpu_tlast = in_tlast;
cpu_terror = in_tlast; // Illegal short packet: Drop it
end
ST_FWD_CHDR: begin
in_tready = chdr_tready & (discard_cpu_pkt ? cpu_tready : 1'b1);
cpu_tvalid = discard_cpu_pkt;
cpu_tlast = discard_cpu_pkt;
cpu_terror = discard_cpu_pkt;
end
ST_FWD_CPU: begin
in_tready = cpu_tready;
cpu_tvalid = in_tvalid;
cpu_tlast = in_tlast;
cpu_terror = 1'b0;
end
ST_DROP_PKT: begin
in_tready = discard_cpu_pkt ? cpu_tready : 1'b1;
cpu_tvalid = discard_cpu_pkt;
cpu_tlast = discard_cpu_pkt;
cpu_terror = discard_cpu_pkt;
end
default: begin
in_tready = 1'b0;
cpu_tvalid = 1'b0;
cpu_tlast = 1'b0;
cpu_terror = 1'b0;
end
endcase
end
assign cpu_tdata = in_tdata;
assign cpu_tuser = in_tuser;
assign chdr_tdata = in_tdata;
assign chdr_tuser = {udp_src_port_cached, ipv4_src_addr_cached, eth_src_addr_cached};
assign chdr_tlast = in_tlast;
assign chdr_tvalid = in_tvalid && (state == ST_FWD_CHDR);
assign chdr_terror = in_tuser[3];
//---------------------------------------
// Output processing
//---------------------------------------
wire [63:0] o_cpu_tdata;
wire [3:0] o_cpu_tuser;
wire o_cpu_terror, o_cpu_tlast, o_cpu_tvalid, o_cpu_tready;
axi_fifo #(
.WIDTH(64+4+1+1),.SIZE(1)
) out_reg_cpu_i (
.clk(clk), .reset(rst), .clear(1'b0),
.i_tdata({cpu_tlast, cpu_terror, cpu_tuser, cpu_tdata}),
.i_tvalid(cpu_tvalid), .i_tready(cpu_tready),
.o_tdata({o_cpu_tlast, o_cpu_terror, o_cpu_tuser, o_cpu_tdata}),
.o_tvalid(o_cpu_tvalid), .o_tready(o_cpu_tready),
.space(), .occupied()
);
// We cannot make a CHDR/noCHDR routing decision until we are in the middle
// of a packet so we use a packet gate for the CPU path because we can rewind
// the write pointer and drop the packet in case it's destined for the CHDR
// path.
// NOTE: The SIZE of this FIFO must be 11 to accomodate a 9000 byte jumbo frame
// regardless of the CHDR MTU
axi_packet_gate #( .WIDTH(64+4), .SIZE(11), .USE_AS_BUFF(0) ) cpu_out_gate_i (
.clk(clk), .reset(rst), .clear(1'b0),
.i_tdata({o_cpu_tuser, o_cpu_tdata}), .i_tlast(o_cpu_tlast), .i_terror(o_cpu_terror | o_cpu_tuser[3]),
.i_tvalid(o_cpu_tvalid), .i_tready(o_cpu_tready),
.o_tdata({m_cpu_tuser, m_cpu_tdata}), .o_tlast(m_cpu_tlast),
.o_tvalid(m_cpu_tvalid), .o_tready(m_cpu_tready)
);
wire [63:0] o_chdr_tdata;
wire [95:0] o_chdr_tuser;
wire o_chdr_tlast, o_chdr_tvalid, o_chdr_tready;
wire o_chdr_data_tvalid, o_chdr_user_tvalid;
wire o_chdr_data_tready, o_chdr_user_tready;
axi_fifo #(
.WIDTH(96),.SIZE(8)
) chdr_user_fifo_i (
.clk(clk), .reset(rst), .clear(1'b0),
.i_tdata(chdr_tuser),
.i_tvalid(chdr_tvalid & chdr_tready & chdr_tlast & ~chdr_terror), .i_tready(/* Always ready */),
.o_tdata(o_chdr_tuser),
.o_tvalid(o_chdr_user_tvalid), .o_tready(o_chdr_user_tready),
.space(), .occupied()
);
axi_packet_gate #(
.WIDTH(64), .SIZE(11), .USE_AS_BUFF(1), .MIN_PKT_SIZE(1)
) chdr_out_gate_i (
.clk(clk), .reset(rst), .clear(1'b0),
.i_tdata(chdr_tdata), .i_tlast(chdr_tlast), .i_terror(chdr_terror),
.i_tvalid(chdr_tvalid), .i_tready(chdr_tready),
.o_tdata(o_chdr_tdata), .o_tlast(o_chdr_tlast),
.o_tvalid(o_chdr_data_tvalid), .o_tready(o_chdr_data_tready)
);
assign o_chdr_tvalid = o_chdr_data_tvalid & o_chdr_user_tvalid;
assign o_chdr_user_tready = o_chdr_tready & o_chdr_data_tvalid & o_chdr_tlast;
assign o_chdr_data_tready = o_chdr_tready & o_chdr_user_tvalid;
chdr_trim_payload #(
.CHDR_W(64), .USER_W(96)
) chdr_trim_i (
.clk(clk), .rst(rst),
.s_axis_tdata(o_chdr_tdata), .s_axis_tuser(o_chdr_tuser),
.s_axis_tlast(o_chdr_tlast), .s_axis_tvalid(o_chdr_tvalid), .s_axis_tready(o_chdr_tready),
.m_axis_tdata(m_chdr_tdata), .m_axis_tuser(m_chdr_tuser),
.m_axis_tlast(m_chdr_tlast), .m_axis_tvalid(m_chdr_tvalid), .m_axis_tready(m_chdr_tready)
);
endmodule // eth_ipv4_chdr64_dispatch
`default_nettype wire