miegl/b210-k7-fpga
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
adf6f576c67d8d40f1d0efec6b8b1384d8907307
b210-k7-fpga/top/x400/Makefile
T
Javier ValenzuelaWade FifeRyan MarlowMartin BraunHumberto Jimenez
 adf6f576c6 mpm/fpga: x4xx: Major updates in preparation for future devices 
FPGA:
- Split up MB registers that control daughterboard specific settings so
  that daughterboards 0 and 1 could have different setings, in
  preparation for future devices that require different settings.
  This requires a compat number bump to 8.0.
- Add registers for additional RFDC information, including the
  block/tile mapping of the individual channels, and information about
  resampling capabilities
- Identify sections of code that would be specific to X410/ZBX and move
  them to their own headers, so it's trivial to add device-specific
  sections of code instead for other devices in the future.
  - This includes constraints for clocks and I/O pins.
- Remove ability to do timed ctrlport transactions to the MB CPLD, this
  was unused and possibly broken.
- Move daughterboard-specific code into its own code location
  (dboards/zbx)
- Move X410-specific register documentation to its own location
  (doc/X410)
- Refactor Makefiles to split out X410/ZBX specific components and allow
  switching between device types
- Add 512-bit AXI interconnects
- Make number of timekeepers configurable (X410 keeps the single
  timekeeper)

MPM:
- Required compat is bumped to 8.0
- Now supports new registers for detecting DSP capabilities and
  multi-rate settings for the daughterboards
- Adds MMCM controls (currently unused)

Co-authored-by: Wade Fife <wade.fife@ni.com>
Co-authored-by: Ryan Marlow <ryan@lmarlow.com>
Co-authored-by: Martin Braun <martin.braun@ettus.com>
Co-authored-by: Humberto Jimenez <humberto.jimenez@ni.com>


Original-commit: c1d268917ea65dd9c5a42366014cb96d3c025223
2023-05-23 09:06:17 +02:00

266 lines
12 KiB
Makefile
Raw Blame History

#
# Copyright 2022 Ettus Research, a National Instruments Brand
#
# SPDX-License-Identifier: LGPL-3.0-or-later
#
# NOTE: All comments prefixed with a "##" will be displayed as a part of the "make help" target
##-------------------
##USRP X4xx FPGA Help
##-------------------
##Usage:
## make <Targets> <Options>
##
##Output:
## build/usrp_<product>_fpga_<image_type>.bit: Configuration bitstream with header
## build/usrp_<product>_fpga_<image_type>.dts: Device tree source file
## build/usrp_<product>_fpga_<image_type>.rpt: Build report (includes utilization and timing summary)
# Base output directory for all builds
BUILD_BASE_DIR ?= .
# Definitions
# MGT Types from x4xx_mgt_type.vh
MGT_100GbE = 5
MGT_Aurora = 3
MGT_10GbE = 2
MGT_Disabled = 0
# For a 4-lane MGT like 100GBE set QSFPx_0=MGT_100GbE and all others to
# MGT_Disabled. For a 1-lane MGT like 10GbE do not set anything for unused
# lanes. This ensures something is defined only for the lanes that are used, so
# that the TX/RX signals are connected. The presence of a define causes TX/RX
# to be declared, whereas declaring TX/RX on an unused lane will cause an error
# in bitgen for unconstrained pins after it is optimized out.
QSFP0_10GBE = QSFP0_0=$(MGT_10GbE)
QSFP0_4X10GBE = QSFP0_0=$(MGT_10GbE) QSFP0_1=$(MGT_10GbE) QSFP0_2=$(MGT_10GbE) QSFP0_3=$(MGT_10GbE)
QSFP0_100GBE = QSFP0_0=$(MGT_100GbE) QSFP0_1=$(MGT_Disabled) QSFP0_2=$(MGT_Disabled) QSFP0_3=$(MGT_Disabled)
QSFP1_10GBE = QSFP1_0=$(MGT_10GbE)
QSFP1_4X10GBE = QSFP1_0=$(MGT_10GbE) QSFP1_1=$(MGT_10GbE) QSFP1_2=$(MGT_10GbE) QSFP1_3=$(MGT_10GbE)
QSFP1_100GBE = QSFP1_0=$(MGT_100GbE) QSFP1_1=$(MGT_Disabled) QSFP1_2=$(MGT_Disabled) QSFP1_3=$(MGT_Disabled)
# Target specific variables
X410_IP: DEFS += $(QSFP0_10GBE) RF_BW=100
X410_X1_100: DEFS += $(QSFP0_10GBE) RF_BW=100 RF_CORE_100M=1 DRAM_CH=4*$(DRAM) DRAM_W=64
X410_XG_100: DEFS += $(QSFP0_10GBE) $(QSFP1_10GBE) RF_BW=100 RF_CORE_100M=1 DRAM_CH=4*$(DRAM) DRAM_W=64
X410_X4_100: DEFS += $(QSFP0_4X10GBE) RF_BW=100 RF_CORE_100M=1 DRAM_CH=4*$(DRAM) DRAM_W=64
X410_X4C_100: DEFS += $(QSFP0_4X10GBE) $(QSFP1_100GBE) RF_BW=100 RF_CORE_100M=1 DRAM_CH=0
X410_C1_100: DEFS += $(QSFP0_100GBE) RF_BW=100 RF_CORE_100M=1 DRAM_CH=4*$(DRAM) DRAM_W=64
X410_UC_100: DEFS += $(QSFP1_100GBE) RF_BW=100 RF_CORE_100M=1 DRAM_CH=4*$(DRAM) DRAM_W=64
X410_C1_200: DEFS += $(QSFP0_100GBE) RF_BW=200 RF_CORE_200M=1 DRAM_CH=4*$(DRAM) DRAM_W=64
X410_UC_200: DEFS += $(QSFP1_100GBE) RF_BW=200 RF_CORE_200M=1 DRAM_CH=4*$(DRAM) DRAM_W=64
X410_CG_200: DEFS += $(QSFP0_100GBE) $(QSFP1_100GBE) RF_BW=200 RF_CORE_200M=1 DRAM_CH=4*$(DRAM) DRAM_W=64
X410_X1_200: DEFS += $(QSFP0_10GBE) RF_BW=200 RF_CORE_200M=1 DRAM_CH=4*$(DRAM) DRAM_W=64
X410_XG_200: DEFS += $(QSFP0_10GBE) $(QSFP1_10GBE) RF_BW=200 RF_CORE_200M=1 DRAM_CH=4*$(DRAM) DRAM_W=64
X410_X4_200: DEFS += $(QSFP0_4X10GBE) RF_BW=200 RF_CORE_200M=1 DRAM_CH=4*$(DRAM) DRAM_W=64
X410_X4C_200: DEFS += $(QSFP0_4X10GBE) $(QSFP1_100GBE) RF_BW=200 RF_CORE_200M=1 DRAM_CH=0
X410_X1_400: DEFS += $(QSFP0_10GBE) RF_BW=400 RF_CORE_400M=1 DRAM_CH=4*$(DRAM) DRAM_W=128
X410_XG_400: DEFS += $(QSFP0_10GBE) $(QSFP1_10GBE) RF_BW=400 RF_CORE_400M=1 DRAM_CH=4*$(DRAM) DRAM_W=128
X410_X4_400: DEFS += $(QSFP0_4X10GBE) RF_BW=400 RF_CORE_400M=1 DRAM_CH=4*$(DRAM) DRAM_W=128
X410_C1_400: DEFS += $(QSFP0_100GBE) RF_BW=400 RF_CORE_400M=1 DRAM_CH=0
X410_UC_400: DEFS += $(QSFP1_100GBE) RF_BW=400 RF_CORE_400M=1 DRAM_CH=0
X410_CG_400: DEFS += $(QSFP0_100GBE) $(QSFP1_100GBE) RF_BW=400 RF_CORE_400M=1 DRAM_CH=0
# DRAM IP inclusion. Set to 1 to include DRAM memory controller in design, 0 to
# exclude it. Note that some targets exclude it regardless of this setting.
DRAM ?= 1
DEFS += $(OPTIONS)
# Initialize a build seed. This can be changed to randomly affect build results.
BUILD_SEED ?= 0
DEFS += BUILD_SEED=$(BUILD_SEED)
# Defaults specific to the various targets:
X410_200_DEFAULTS := DEFAULT_RFNOC_IMAGE_CORE_FILE=x410_200_rfnoc_image_core.v DEFAULT_EDGE_FILE=$(abspath x410_200_static_router.hex)
X410_X4C_200_DEFAULTS := DEFAULT_RFNOC_IMAGE_CORE_FILE=x410_x4c_200_rfnoc_image_core.v DEFAULT_EDGE_FILE=$(abspath x410_x4c_200_static_router.hex)
X410_CG_200_DEFAULTS := DEFAULT_RFNOC_IMAGE_CORE_FILE=x410_cg_200_rfnoc_image_core.v DEFAULT_EDGE_FILE=$(abspath x410_cg_200_static_router.hex)
X410_400_DEFAULTS := DEFAULT_RFNOC_IMAGE_CORE_FILE=x410_400_rfnoc_image_core.v DEFAULT_EDGE_FILE=$(abspath x410_400_static_router.hex)
X410_400_D_DEFAULTS := DEFAULT_RFNOC_IMAGE_CORE_FILE=x410_400_d_rfnoc_image_core.v DEFAULT_EDGE_FILE=$(abspath x410_400_d_static_router.hex)
# Option to stop after RTL elaboration. Use this flag as a synthesis check.
ifndef TARGET
ifdef CHECK
TARGET = rtl
else ifdef SYNTH
TARGET = synth
else
TARGET = bin
endif
endif
TOP ?= x4xx
# vivado_build($1=Device, $2=Definitions, $3=Defaults)
vivado_build = make -f Makefile.x4xx.inc $(TARGET) NAME=$@ ARCH=$(XIL_ARCH_$1) PART_ID=$(XIL_PART_ID_$1) $2 TOP_MODULE=$(TOP) EXTRA_DEFS="$2" $3
vivado_ip = make -f Makefile.x4xx.inc viv_ip NAME=$@ ARCH=$(XIL_ARCH_$1) PART_ID=$(XIL_PART_ID_$1) $2 TOP_MODULE=$(TOP) EXTRA_DEFS="$2" $3
# vivado_build($1=Device, $2=Option)
ifeq ($(TARGET),bin)
post_build = @\
mkdir -p build; \
echo "Exporting bitstream file..."; \
cp $(BUILD_BASE_DIR)/build-$(1)_$(2)/x4xx.bit build/usrp_`echo $(1) | tr A-Z a-z`_fpga_$(2).bit; \
echo "Exporting build report..."; \
cp $(BUILD_BASE_DIR)/build-$(1)_$(2)/build.rpt build/usrp_`echo $(1) | tr A-Z a-z`_fpga_$(2).rpt; \
echo "Build DONE ... $(1)_$(2)";
else
post_build = @echo "Skipping bitfile export."
endif
##
##Available Targets
##-------------|-----------|----|-----------------|-----------------|------------
##Target | Bandwidth | Ch | QSFP0 | QSFP1 | DRAM
##-------------|-----------|----|-----------------|-----------------|------------
##X410_X1_100 | 100 MHz | 4 | 10 GbE (Lane 0) | Unused | 64b x 4 Ch
##X410_XG_100 | 100 MHz | 4 | 10 GbE (Lane 0) | 10 GbE (Lane 0) | 64b x 4 Ch
##X410_X4_100 | 100 MHz | 4 | 4 x 10 GbE | Unused | 64b x 4 Ch
##X410_X4C_100 | 100 MHz | 4 | 4 x 10 GbE | 100 GbE | Unused
##X410_C1_100 | 100 MHz | 4 | 100 GbE | Unused | 64b x 4 Ch
##X410_UC_100 | 100 MHz | 4 | Unused | 100 GbE | 64b x 4 Ch
##X410_X1_200 | 200 MHz | 4 | 10 GbE (Lane 0) | Unused | 64b x 4 Ch
##X410_XG_200 | 200 MHz | 4 | 10 GbE (Lane 0) | 10 GbE (Lane 0) | 64b x 4 Ch
##X410_X4_200 | 200 MHz | 4 | 4 x 10 GbE | Unused | 64b x 4 Ch
##X410_X4C_200 | 200 MHz | 4 | 4 x 10 GbE | 100 GbE | Unused
##X410_C1_200 | 200 MHz | 4 | 100 GbE | Unused | 64b x 4 Ch
##X410_UC_200 | 200 MHz | 4 | Unused | 100 GbE | 64b x 4 Ch
##X410_X1_400 | 400 MHz | 4 | 10 GbE (Lane 0) | Unused | 128b x 4 Ch
##X410_XG_400 | 400 MHz | 4 | 10 GbE (Lane 0) | 10 GbE (Lane 0) | 128b x 4 ch
##X410_X4_400 | 400 MHz | 4 | 4 x 10 GbE | Unused | 128b x 4 Ch
##X410_C1_400 | 400 MHz | 4 | 100 GbE | Unused | Unused
##X410_UC_400 | 400 MHz | 4 | Unused | 100 GbE | Unused
##X410_CG_400 | 400 MHz | 4 | 100 GbE | 100 GbE | Unused
##* Note: Not all targets are shipped with UHD.
##* Note: Some YAML configurations might not use all available DRAM channels.
X410_X1_100: X410_IP build/usrp_x410_fpga_X1_100.dts
$(call vivado_build,X410,$(DEFS) X410=1,$(X410_200_DEFAULTS))
$(call post_build,X410,X1_100)
X410_XG_100: X410_IP build/usrp_x410_fpga_XG_100.dts
$(call vivado_build,X410,$(DEFS) X410=1,$(X410_200_DEFAULTS))
$(call post_build,X410,XG_100)
X410_X4_100: X410_IP build/usrp_x410_fpga_X4_100.dts
$(call vivado_build,X410,$(DEFS) X410=1,$(X410_200_DEFAULTS))
$(call post_build,X410,X4_100)
X410_X4C_100: X410_IP build/usrp_x410_fpga_X4C_100.dts
$(call vivado_build,X410,$(DEFS) X410=1,$(X410_X4C_200_DEFAULTS))
$(call post_build,X410,X4C_100)
X410_C1_100: X410_IP build/usrp_x410_fpga_C1_100.dts
$(call vivado_build,X410,$(DEFS) X410=1,$(X410_CG_200_DEFAULTS))
$(call post_build,X410,C1_100)
X410_UC_100: X410_IP build/usrp_x410_fpga_UC_100.dts
$(call vivado_build,X410,$(DEFS) X410=1,$(X410_CG_200_DEFAULTS))
$(call post_build,X410,UC_100)
X410_X1_200: X410_IP build/usrp_x410_fpga_X1_200.dts
$(call vivado_build,X410,$(DEFS) X410=1,$(X410_200_DEFAULTS))
$(call post_build,X410,X1_200)
X410_XG_200: X410_IP build/usrp_x410_fpga_XG_200.dts
$(call vivado_build,X410,$(DEFS) X410=1,$(X410_200_DEFAULTS))
$(call post_build,X410,XG_200)
X410_X4_200: X410_IP build/usrp_x410_fpga_X4_200.dts
$(call vivado_build,X410,$(DEFS) X410=1,$(X410_200_DEFAULTS))
$(call post_build,X410,X4_200)
X410_X4C_200: X410_IP build/usrp_x410_fpga_X4C_200.dts
$(call vivado_build,X410,$(DEFS) X410=1,$(X410_X4C_200_DEFAULTS))
$(call post_build,X410,X4C_200)
X410_C1_200: X410_IP build/usrp_x410_fpga_C1_200.dts
$(call vivado_build,X410,$(DEFS) X410=1,$(X410_CG_200_DEFAULTS))
$(call post_build,X410,C1_200)
X410_UC_200: X410_IP build/usrp_x410_fpga_UC_200.dts
$(call vivado_build,X410,$(DEFS) X410=1,$(X410_CG_200_DEFAULTS))
$(call post_build,X410,UC_200)
X410_X1_400: X410_IP build/usrp_x410_fpga_X1_400.dts
$(call vivado_build,X410,$(DEFS) X410=1,$(X410_400_D_DEFAULTS))
$(call post_build,X410,X1_400)
X410_XG_400: X410_IP build/usrp_x410_fpga_XG_400.dts
$(call vivado_build,X410,$(DEFS) X410=1,$(X410_400_D_DEFAULTS))
$(call post_build,X410,XG_400)
X410_X4_400: X410_IP build/usrp_x410_fpga_X4_400.dts
$(call vivado_build,X410,$(DEFS) X410=1,$(X410_400_D_DEFAULTS))
$(call post_build,X410,X4_400)
X410_C1_400: X410_IP build/usrp_x410_fpga_C1_400.dts
$(call vivado_build,X410,$(DEFS) X410=1,$(X410_400_DEFAULTS))
$(call post_build,X410,C1_400)
X410_UC_400: X410_IP build/usrp_x410_fpga_UC_400.dts
$(call vivado_build,X410,$(DEFS) X410=1,$(X410_400_DEFAULTS))
$(call post_build,X410,UC_400)
X410_CG_400: X410_IP build/usrp_x410_fpga_CG_400.dts
$(call vivado_build,X410,$(DEFS) X410=1,$(X410_400_DEFAULTS))
$(call post_build,X410,CG_400)
##
##Experimental Targets
##-------------|-----------|----|-----------------|-----------------|------------
##Target | Bandwidth | Ch | QSFP0 | QSFP1 | DRAM
##-------------|-----------|----|-----------------|-----------------|------------
##X410_CG_200 | 200 | 4 | 100 GbE | 100 GbE | 64b x 4 Ch
X410_CG_200: X410_IP build/usrp_x410_fpga_CG_200.dts
$(call vivado_build,X410,$(DEFS) X410=1,$(X410_CG_200_DEFAULTS))
$(call post_build,X410,CG_200)
##
##Other Make Targets
##------------------
.DEFAULT_GOAL := all
all: X410_X4_200 X410_CG_400 X410_UC_200 ##(Default targets)
X410_IP: ##Build IP only.
+$(call vivado_ip,X410,$(DEFS) X410=1)
build/usrp_x410%.dts: dts/*.dts dts/*.dtsi
-mkdir -p build
tools/parse_versions_for_dts.py \
--input regmap/x410/versioning_regs_regmap_utils.vh \
--output dts/x410-version-info.dtsi \
--components fpga,cpld_ifc,db_gpio_ifc,rf_core_100m,rf_core_400m
${CC} -o $@ -C -E -I dts -nostdinc -undef -x assembler-with-cpp -D__DTS__ \
$$(python3 tools/get_dts_input.py --target $@)
clean: ##Clean up all target build outputs.
@echo "Cleaning targets..."
@rm -rf build-X4*
@rm -rf build
cleanall: ##Clean up all target and IP build outputs.
@echo "Cleaning targets and IP..."
@rm -rf build-ip
@rm -rf build-X4*
@rm -rf build
help: ##Show this help message.
@grep -h "##" Makefile | grep -v "\"##\"" | sed -e 's/\\$$//' | sed -e 's/##//'
##
##Supported Options
##-----------------
##DRAM=0 Exclude DDR4 memory controller IP from the FPGA build.
##GUI=1 Launch the build in the Vivado GUI.
##CHECK=1 Launch the syntax checker instead of building a bitfile.
##SYNTH=1 Launch the build but stop after synthesis.
##BUILD_SEED=<N> Build seed to used to affect build results. (Default is 0)
##TOP=<module> Specify a top module for syntax checking. (Default is the bitfile top)
.PHONY: all clean cleanall help
Reference in New Issue View Git Blame Copy Permalink