217 lines
8.9 KiB
Makefile
217 lines
8.9 KiB
Makefile
#
|
|
# Copyright 2016-2018 Ettus Research, a National Instruments Company
|
|
# Copyright 2019 Ettus Research, a National Instruments Brand
|
|
#
|
|
|
|
# NOTE: All comments prefixed with a "##" will be displayed as a part of the "make help" target
|
|
##-------------------
|
|
##USRP N3XX FPGA Help
|
|
##-------------------
|
|
##Usage:
|
|
## make <Targets> <Options>
|
|
##
|
|
##Output:
|
|
## build/usrp_<product>_fpga_<image_type>.bit: Configuration bitstream with header
|
|
## build/usrp_<product>_fpga_<image_type>.dts: Device tree source file
|
|
## build/usrp_<product>_fpga_<image_type>.rpt: Build report (includes utilization and timing summary)
|
|
|
|
# Debug Options
|
|
# Uncomment this line or add to make arg to omit radio_clk (sourced from db) and use bus_clk as radio_clk
|
|
# OPTIONS += NO_DB=1
|
|
# Uncomment this line to add two example Aurora loopback lanes on the general NPIO bus.
|
|
# OPTIONS += NPIO_LANES=2
|
|
# Uncomment this line to add four example Aurora loopback lanes on the QSFP NPIO bus.
|
|
# OPTIONS += QSFP_LANES=4
|
|
|
|
# Base output directory for all builds
|
|
BUILD_BASE_DIR ?= .
|
|
|
|
# Initialize a build seed. This can be changed to randomly affect build results.
|
|
BUILD_SEED ?= 0
|
|
|
|
# Additional definitions specific to the various targets:
|
|
WX_DEFS=SFP0_WR=1 SFP1_10GBE=1 BUILD_WR=1 BUILD_10G=1 $(OPTIONS) BUILD_SEED=$(BUILD_SEED)
|
|
HG_DEFS=SFP0_1GBE=1 SFP1_10GBE=1 BUILD_1G=1 BUILD_10G=1 $(OPTIONS) BUILD_SEED=$(BUILD_SEED)
|
|
XG_DEFS=SFP0_10GBE=1 SFP1_10GBE=1 BUILD_10G=1 $(OPTIONS) BUILD_SEED=$(BUILD_SEED)
|
|
HA_DEFS=SFP0_1GBE=1 SFP1_AURORA=1 BUILD_1G=1 BUILD_AURORA=1 $(OPTIONS) BUILD_SEED=$(BUILD_SEED)
|
|
XA_DEFS=SFP0_10GBE=1 SFP1_AURORA=1 BUILD_10G=1 BUILD_AURORA=1 $(OPTIONS) BUILD_SEED=$(BUILD_SEED)
|
|
AA_DEFS=SFP0_AURORA=1 SFP1_AURORA=1 BUILD_AURORA=1 $(OPTIONS) BUILD_SEED=$(BUILD_SEED)
|
|
XQ_DEFS=SFP0_WR=1 QSFP_10GBE=1 BUILD_WR=1 BUILD_10G=1 QSFP_LANES=2 $(OPTIONS) BUILD_SEED=$(BUILD_SEED)
|
|
AQ_DEFS=SFP0_10GBE=1 SFP1_10GBE=1 QSFP_AURORA=1 BUILD_10G=1 BUILD_AURORA=1 QSFP_LANES=4 $(OPTIONS) BUILD_SEED=$(BUILD_SEED)
|
|
|
|
# Defaults specific to the various targets:
|
|
N300_DEFAULTS:=DEFAULT_RFNOC_IMAGE_CORE_FILE=$(abspath n300_rfnoc_image_core.v) DEFAULT_EDGE_FILE=$(abspath n300_static_router.hex)
|
|
N310_DEFAULTS:=DEFAULT_RFNOC_IMAGE_CORE_FILE=$(abspath n310_rfnoc_image_core.v) DEFAULT_EDGE_FILE=$(abspath n310_static_router.hex)
|
|
N320_DEFAULTS:=DEFAULT_RFNOC_IMAGE_CORE_FILE=$(abspath n320_rfnoc_image_core.v) DEFAULT_EDGE_FILE=$(abspath n320_static_router.hex)
|
|
N300AA_DEFAULTS:=DEFAULT_RFNOC_IMAGE_CORE_FILE=$(abspath n300_bist_image_core.v) DEFAULT_EDGE_FILE=$(abspath n300_bist_static_router.hex)
|
|
N310AA_DEFAULTS:=DEFAULT_RFNOC_IMAGE_CORE_FILE=$(abspath n310_bist_image_core.v) DEFAULT_EDGE_FILE=$(abspath n310_bist_static_router.hex)
|
|
N320AA_DEFAULTS:=DEFAULT_RFNOC_IMAGE_CORE_FILE=$(abspath n320_bist_image_core.v) DEFAULT_EDGE_FILE=$(abspath n320_bist_static_router.hex)
|
|
|
|
# Set build option (check RTL, run synthesis, or do a full build)
|
|
ifndef TARGET
|
|
ifdef CHECK
|
|
TARGET = rtl
|
|
else ifdef SYNTH
|
|
TARGET = synth
|
|
else
|
|
TARGET = bin
|
|
endif
|
|
endif
|
|
TOP ?= n3xx
|
|
|
|
# vivado_build($1=Device, $2=Definitions, $3=Defaults)
|
|
# Device: N300, N310, or N320
|
|
# Definitions: See above (*_DEFS)
|
|
# Defaults: See above (*_DEFAULTS)
|
|
vivado_build = make -f Makefile.n3xx.inc $(TARGET) NAME=$@ ARCH=$(XIL_ARCH_$1) PART_ID=$(XIL_PART_ID_$1) $2 TOP_MODULE=$(TOP) EXTRA_DEFS="$2" $3
|
|
vivado_ip = make -f Makefile.n3xx.inc viv_ip NAME=$@ ARCH=$(XIL_ARCH_$1) PART_ID=$(XIL_PART_ID_$1) $2 TOP_MODULE=$(TOP) EXTRA_DEFS="$2" $3
|
|
|
|
# post_build($1=Device, $2=Option)
|
|
ifeq ($(TARGET),bin)
|
|
post_build = @\
|
|
mkdir -p build; \
|
|
echo "Exporting bitstream file..."; \
|
|
cp $(BUILD_BASE_DIR)/build-$(1)_$(2)/n3xx.bit build/usrp_`echo $(1) | tr A-Z a-z`_fpga_$(2).bit; \
|
|
echo "Exporting build report..."; \
|
|
cp $(BUILD_BASE_DIR)/build-$(1)_$(2)/build.rpt build/usrp_`echo $(1) | tr A-Z a-z`_fpga_$(2).rpt; \
|
|
echo "Build DONE ... $(1)_$(2)";
|
|
else
|
|
post_build = @echo "Skipping bitfile export."
|
|
endif
|
|
|
|
##
|
|
##Supported Targets
|
|
##-----------------
|
|
|
|
all: N300_HG N300_XG N310_HG N310_XG N320_HG N320_XG ##(Default target)
|
|
|
|
##N300_IP: Build IP for N300 only.
|
|
N300_IP:
|
|
+$(call vivado_ip,N300,$(HG_DEFS) N300=1,$(N300_DEFAULTS))
|
|
|
|
##N310_IP: Build IP for N310/N320.
|
|
##N320_IP: Build IP for N310/N320.
|
|
N310_IP N320_IP: N3X0_IP
|
|
N3X0_IP:
|
|
+$(call vivado_ip,N310,$(HG_DEFS) N310=1,$(N310_DEFAULTS))
|
|
|
|
##N310_WX: 1GigE White Rabbit on SFP+ Port0, 10Gig on SFP+ Port1.
|
|
N310_WX: N3X0_IP build/usrp_n310_fpga_WX.dts
|
|
$(call vivado_build,N310,$(WX_DEFS) N310=1,$(N310_DEFAULTS))
|
|
$(call post_build,N310,WX)
|
|
|
|
##N310_HG: 1GigE on SFP+ Port0, 10Gig on SFP+ Port1.
|
|
N310_HG: N3X0_IP build/usrp_n310_fpga_HG.dts
|
|
$(call vivado_build,N310,$(HG_DEFS) N310=1,$(N310_DEFAULTS))
|
|
$(call post_build,N310,HG)
|
|
|
|
##N310_XG: 10GigE on SFP+ Port0, 10Gig on SFP+ Port1.
|
|
N310_XG: N3X0_IP build/usrp_n310_fpga_XG.dts
|
|
$(call vivado_build,N310,$(XG_DEFS) N310=1,$(N310_DEFAULTS))
|
|
$(call post_build,N310,XG)
|
|
|
|
##N310_HA: 1Gig on SFP+ Port0, Aurora on SFP+ Port1.
|
|
N310_HA: N3X0_IP build/usrp_n310_fpga_HA.dts
|
|
$(call vivado_build,N310,$(HA_DEFS) N310=1,$(N310_DEFAULTS))
|
|
$(call post_build,N310,HA)
|
|
|
|
##N310_XA: 10Gig on SFP+ Port0, Aurora on SFP+ Port1.
|
|
N310_XA: N3X0_IP build/usrp_n310_fpga_XA.dts
|
|
$(call vivado_build,N310,$(XA_DEFS) N310=1,$(N310_DEFAULTS))
|
|
$(call post_build,N310,XA)
|
|
|
|
##N310_AA: Aurora on SFP+ Port0, Aurora on SFP+ Port1.
|
|
N310_AA: N3X0_IP build/usrp_n310_fpga_AA.dts
|
|
$(call vivado_build,N310,$(AA_DEFS) N310=1,$(N310AA_DEFAULTS))
|
|
$(call post_build,N310,AA)
|
|
|
|
##N300_WX: 1GigE White Rabbit on SFP+ Port0, 10Gig on SFP+ Port1.
|
|
N300_WX: N300_IP build/usrp_n300_fpga_WX.dts
|
|
$(call vivado_build,N300,$(WX_DEFS) N300=1,$(N300_DEFAULTS))
|
|
$(call post_build,N300,WX)
|
|
|
|
##N300_HG: 1GigE on SFP+ Port0, 10Gig on SFP+ Port1.
|
|
N300_HG: N300_IP build/usrp_n300_fpga_HG.dts
|
|
$(call vivado_build,N300,$(HG_DEFS) N300=1,$(N300_DEFAULTS))
|
|
$(call post_build,N300,HG)
|
|
|
|
##N300_XG: 10GigE on SFP+ Port0, 10Gig on SFP+ Port1.
|
|
N300_XG: N300_IP build/usrp_n300_fpga_XG.dts
|
|
$(call vivado_build,N300,$(XG_DEFS) N300=1,$(N300_DEFAULTS))
|
|
$(call post_build,N300,XG)
|
|
|
|
##N300_HA: 1Gig on SFP+ Port0, Aurora on SFP+ Port1.
|
|
N300_HA: N300_IP build/usrp_n300_fpga_HA.dts
|
|
$(call vivado_build,N300,$(HA_DEFS) N300=1,$(N300_DEFAULTS))
|
|
$(call post_build,N300,HA)
|
|
|
|
##N300_XA: 10Gig on SFP+ Port0, Aurora on SFP+ Port1.
|
|
N300_XA: N300_IP build/usrp_n300_fpga_XA.dts
|
|
$(call vivado_build,N300,$(XA_DEFS) N300=1,$(N300_DEFAULTS))
|
|
$(call post_build,N300,XA)
|
|
|
|
##N300_AA: Aurora on SFP+ Port0, Aurora on SFP+ Port1.
|
|
N300_AA: N300_IP build/usrp_n300_fpga_AA.dts
|
|
$(call vivado_build,N300,$(AA_DEFS) N300=1,$(N300AA_DEFAULTS))
|
|
$(call post_build,N300,AA)
|
|
|
|
##N320_WX: 1GigE White Rabbit on SFP+ Port0, 10Gig on SFP+ Port1.
|
|
N320_WX: N3X0_IP build/usrp_n320_fpga_WX.dts
|
|
$(call vivado_build,N320,$(WX_DEFS) N320=1,$(N320_DEFAULTS))
|
|
$(call post_build,N320,WX)
|
|
|
|
##N320_HG: 1GigE on SFP+ Port0, 10Gig on SFP+ Port1.
|
|
N320_HG: N3X0_IP build/usrp_n320_fpga_HG.dts
|
|
$(call vivado_build,N320,$(HG_DEFS) N320=1,$(N320_DEFAULTS))
|
|
$(call post_build,N320,HG)
|
|
|
|
##N320_XG: 10GigE on SFP+ Port0, 10Gig on SFP+ Port1.
|
|
N320_XG: N3X0_IP build/usrp_n320_fpga_XG.dts
|
|
$(call vivado_build,N320,$(XG_DEFS) N320=1,$(N320_DEFAULTS))
|
|
$(call post_build,N320,XG)
|
|
|
|
##N320_XQ: WR on SFP+ Port0, 10Gig on QSFP+ Port0,1.
|
|
N320_XQ: N3X0_IP build/usrp_n320_fpga_XQ.dts
|
|
$(call vivado_build,N320,$(XQ_DEFS) N320=1,$(N320_DEFAULTS))
|
|
$(call post_build,N320,XQ)
|
|
|
|
##N320_AQ: 10Gig on SFP+ Port0,1 Aurora on QSFP+ Port0,1,2,3.
|
|
N320_AQ: N3X0_IP build/usrp_n320_fpga_AQ.dts
|
|
$(call vivado_build,N320,$(AQ_DEFS) N320=1,$(N320_DEFAULTS))
|
|
$(call post_build,N320,AQ)
|
|
|
|
##N320_AA: Aurora on SFP+ Port0, Aurora on SFP+ Port1.
|
|
N320_AA: N3X0_IP build/usrp_n320_fpga_AA.dts
|
|
$(call vivado_build,N320,$(AA_DEFS) N320=1,$(N320AA_DEFAULTS))
|
|
$(call post_build,N320,AA)
|
|
|
|
build/%.dts: dts/%.dts dts/*.dtsi
|
|
-mkdir -p build
|
|
${CC} -o $@ -E -I dts -nostdinc -undef -x assembler-with-cpp -D__DTS__ $<
|
|
|
|
clean: ##Clean up all target build outputs.
|
|
@echo "Cleaning targets..."
|
|
@rm -rf build-N3*_*
|
|
@rm -rf build
|
|
|
|
cleanall: ##Clean up all target and ip build outputs.
|
|
@echo "Cleaning targets and IP..."
|
|
@rm -rf build-ip
|
|
@rm -rf build-N3*_*
|
|
@rm -rf build
|
|
|
|
help: ##Show this help message.
|
|
@grep -h "##" Makefile | grep -v "\"##\"" | sed -e 's/\\$$//' | sed -e 's/##//'
|
|
|
|
##
|
|
##Supported Options
|
|
##-----------------
|
|
##GUI=1 Launch the build in the Vivado GUI.
|
|
##PROJECT=1 Save Vivado project file, otherwise it's created in memory.
|
|
##CHECK=1 Launch the syntax checker instead of building a bitfile.
|
|
##SYNTH=1 Launch the build but stop after synthesis.
|
|
##BUILD_SEED=<N> Build seed to used to affect build results. (Default is 0)
|
|
##TOP=<module> Specify a top module for syntax checking. (Default is the bitfile top)
|
|
|
|
.PHONY: all clean cleanall help
|