Files
b210-k7-fpga/lib/vita_200/new_tx_tb.v
T
+18 6b67702ad7 Merge FPGA repository back into UHD repository
The FPGA codebase was removed from the UHD repository in 2014 to reduce
the size of the repository. However, over the last half-decade, the
split between the repositories has proven more burdensome than it has
been helpful. By merging the FPGA code back, it will be possible to
create atomic commits that touch both FPGA and UHD codebases. Continuous
integration testing is also simplified by merging the repositories,
because it was previously difficult to automatically derive the correct
UHD branch when testing a feature branch on the FPGA repository.

This commit also updates the license files and paths therein.

We are therefore merging the repositories again. Future development for
FPGA code will happen in the same repository as the UHD host code and
MPM code.

== Original Codebase and Rebasing ==

The original FPGA repository will be hosted for the foreseeable future
at its original local location: https://github.com/EttusResearch/fpga/

It can be used for bisecting, reference, and a more detailed history.

The final commit from said repository to be merged here is
05003794e2da61cabf64dd278c45685a7abad7ec. This commit is tagged as
v4.0.0.0-pre-uhd-merge.

If you have changes in the FPGA repository that you want to rebase onto
the UHD repository, simply run the following commands:

- Create a directory to store patches (this should be an empty
  directory):

    mkdir ~/patches

- Now make sure that your FPGA codebase is based on the same state as
  the code that was merged:

    cd src/fpga # Or wherever your FPGA code is stored
    git rebase v4.0.0.0-pre-uhd-merge

  Note: The rebase command may look slightly different depending on what
  exactly you're trying to rebase.

- Create a patch set for your changes versus v4.0.0.0-pre-uhd-merge:

    git format-patch v4.0.0.0-pre-uhd-merge -o ~/patches

  Note: Make sure that only patches are stored in your output directory.
  It should otherwise be empty. Make sure that you picked the correct
  range of commits, and only commits you wanted to rebase were exported
  as patch files.

- Go to the UHD repository and apply the patches:

    cd src/uhd # Or wherever your UHD repository is stored
    git am --directory fpga ~/patches/*
    rm -rf ~/patches # This is for cleanup

== Contributors ==

The following people have contributed mainly to these files (this list
is not complete):

Co-authored-by: Alex Williams <alex.williams@ni.com>
Co-authored-by: Andrej Rode <andrej.rode@ettus.com>
Co-authored-by: Ashish Chaudhari <ashish@ettus.com>
Co-authored-by: Ben Hilburn <ben.hilburn@ettus.com>
Co-authored-by: Ciro Nishiguchi <ciro.nishiguchi@ni.com>
Co-authored-by: Daniel Jepson <daniel.jepson@ni.com>
Co-authored-by: Derek Kozel <derek.kozel@ettus.com>
Co-authored-by: EJ Kreinar <ej@he360.com>
Co-authored-by: Humberto Jimenez <humberto.jimenez@ni.com>
Co-authored-by: Ian Buckley <ian.buckley@gmail.com>
Co-authored-by: Jörg Hofrichter <joerg.hofrichter@ni.com>
Co-authored-by: Jon Kiser <jon.kiser@ni.com>
Co-authored-by: Josh Blum <josh@joshknows.com>
Co-authored-by: Jonathon Pendlum <jonathan.pendlum@ettus.com>
Co-authored-by: Martin Braun <martin.braun@ettus.com>
Co-authored-by: Matt Ettus <matt@ettus.com>
Co-authored-by: Michael West <michael.west@ettus.com>
Co-authored-by: Moritz Fischer <moritz.fischer@ettus.com>
Co-authored-by: Nick Foster <nick@ettus.com>
Co-authored-by: Nicolas Cuervo <nicolas.cuervo@ettus.com>
Co-authored-by: Paul Butler <paul.butler@ni.com>
Co-authored-by: Paul David <paul.david@ettus.com>
Co-authored-by: Ryan Marlow <ryan.marlow@ettus.com>
Co-authored-by: Sugandha Gupta <sugandha.gupta@ettus.com>
Co-authored-by: Sylvain Munaut <tnt@246tNt.com>
Co-authored-by: Trung Tran <trung.tran@ettus.com>
Co-authored-by: Vidush Vishwanath <vidush.vishwanath@ettus.com>
Co-authored-by: Wade Fife <wade.fife@ettus.com>


Original-commit: bafa9d95453387814ef25e6b6256ba8db2df612f
2020-01-28 09:35:36 -08:00

367 lines
9.7 KiB
Verilog

//
// Copyright 2016 Ettus Research, a National Instruments Company
//
// SPDX-License-Identifier: LGPL-3.0-or-later
//
`timescale 1ns/1ps
module new_tx_tb();
`ifdef ISIM
`else //iverilog implied.
xlnx_glbl glbl (.GSR(),.GTS());
`endif
localparam SR_TX_DSP = 8;
localparam SR_TX_RESPONDER = 16;
localparam SR_TX_CTRL = 24;
localparam SR_CYCLES = SR_TX_RESPONDER + 0;
localparam SR_PACKETS = SR_TX_RESPONDER + 1;
localparam SR_PHASE_INC = SR_TX_DSP + 0;
localparam SR_SCALE_FACTOR = SR_TX_DSP + 1;
localparam SR_INTERP = SR_TX_DSP + 2;
localparam SR_ERROR_POLICY = SR_TX_CTRL + 0;
reg clk = 0;
reg reset = 1;
always #10 clk = ~clk;
initial $dumpfile("new_tx_tb.vcd");
initial $dumpvars(0,new_tx_tb);
wire run, strobe;
initial
begin
#1000 reset = 0;
#30000;
$finish;
end
reg [63:0] tdata;
reg tlast;
reg tvalid = 1'b0;
wire tready;
wire [63:0] i_tdata;
wire i_tlast, i_tvalid, i_tready;
reg [7:0] set_addr;
reg [31:0] set_data;
reg set_stb = 1'b0;
reg [63:0] vita_time;
wire [31:0] sample;
wire [175:0] sample_tdata;
wire sample_tready, sample_tvalid;
wire [11:0] seqnum;
wire [63:0] error_code;
wire [31:0] sid;
reg [31:0] samp0, samp1;
reg [11:0] seqno;
wire ack_or_error, packet_consumed;
//
// Task Libaray
//
task write_setting_bus;
input [7:0] address;
input [31:0] data;
begin
@(negedge clk);
set_stb = 1'b0;
set_addr = 8'h0;
set_data = 32'h0;
@(negedge clk);
set_stb = 1'b1;
set_addr = address;
set_data = data;
@(negedge clk);
set_stb = 1'b0;
set_addr = 8'h0;
set_data = 32'h0;
end
endtask // write_setting_bus
task send_ramp;
input [31:0] burst_count;
input [31:0] len;
input [31:0] sid;
reg [31:0] data;
begin
seqno = 0;
data = 0;
send_packet(len, data, 0, seqno, (burst_count==1), 0, sid);
seqno = seqno + 1;
data <= data + len;
if(burst_count > 2)
repeat (burst_count - 2)
begin
send_packet(len, data, 64'h0, seqno, 0, 0, sid);
seqno = seqno + 1;
data <= data + len;
end
if(burst_count > 1)
send_packet(len, data, 64'h0, seqno, 1, 0, sid);
end
endtask // send_ramp
task send_dc;
input [31:0] burst_count;
input [31:0] len;
input [31:0] sid;
reg [31:0] data;
begin
seqno = 0;
data = 1 << 14;
send_packet(len, data, 0, seqno, (burst_count==1), 0, sid);
seqno = seqno + 1;
if(burst_count > 2)
repeat (burst_count - 2)
begin
send_packet(len, data, 64'h0, seqno, 0, 0, sid);
seqno = seqno + 1;
end
if(burst_count > 1)
send_packet(len, data, 64'h0, seqno, 1, 0, sid);
end
endtask // send_ramp
task send_burst;
input [31:0] burst_count;
input [31:0] len;
input [31:0] start_data;
input [63:0] send_time;
input [11:0] start_seqnum;
input send_at;
input [31:0] sid;
begin
seqno = start_seqnum;
send_packet(len, {seqno,start_data[15:0]}, send_time, seqno, (burst_count==1), send_at, sid);
seqno = seqno + 1;
if(burst_count > 2)
repeat (burst_count - 2)
begin
send_packet(len, {seqno,start_data[15:0]}, 64'h0, seqno, 0, 0, sid);
seqno = seqno + 1;
end
if(burst_count > 1)
send_packet(len, {seqno,start_data[15:0]}, 64'h0, seqno, 1, 0, sid);
end
endtask // send_burst
task send_burst_with_seqid_error;
input [31:0] burst_count;
input [31:0] len;
input [31:0] start_data;
input [63:0] send_time;
input [11:0] start_seqnum;
input send_at;
input [31:0] sid;
begin
seqno = start_seqnum;
send_packet(len, {seqno,start_data[15:0]}, send_time, seqno, (burst_count==1), send_at, sid);
seqno = seqno + 1;
if(burst_count > 2)
repeat (burst_count - 2)
begin
// Add a SeqID error in the middle of the packet burst
if (seqno == (start_seqnum + burst_count/2))
seqno = seqno + 1;
send_packet(len, {seqno,start_data[15:0]}, 64'h0, seqno, 0, 0, sid);
seqno = seqno + 1;
end
if(burst_count > 1)
send_packet(len, {seqno,start_data[15:0]}, 64'h0, seqno, 1, 0, sid);
end
endtask // send_burst
task send_packet;
input [31:0] len;
input [31:0] start_data;
input [63:0] send_time;
input [11:0] pkt_seqnum;
input eob;
input send_at;
input [31:0] sid;
begin
// Send a packet
samp0 <= start_data;
samp1 <= start_data + 1;
@(posedge clk);
tlast <= 0;
tdata <= { 1'b0, 1'b0 /*trl*/, send_at, eob, pkt_seqnum, len[15:0]+16'd2+send_at+send_at, sid };
tvalid <= 1;
@(posedge clk)
if(send_at)
begin
tdata <= send_time;
@(posedge clk);
end
repeat (len[31:1]+len[0]-1)
begin
tdata <= {samp0,samp1};
samp0 <= samp0 + 2;
samp1 <= samp1 + 2;
@(posedge clk);
end
tdata <= {samp0,samp1};
tlast <= 1'b1;
@(posedge clk);
tvalid <= 0;
@(posedge clk);
end
endtask // send_packet
`ifdef SIM_SCRIPT
// Load simulation script from local directory
`include "simulation_script.v"
`else
initial
begin
tvalid <= 1'b0;
while(reset)
@(posedge clk);
write_setting_bus(SR_ERROR_POLICY,32'h4);
write_setting_bus(SR_PACKETS,32'h8000_0002);
write_setting_bus(SR_INTERP,32'h1);
send_burst(2/*count*/,5/*len*/,32'hA000_0000/*start*/,64'h100/*time*/,12'h000/*seqnum*/,1/*sendat*/, 32'hDEADBEEF/*sid*/);
//send_burst(3/*count*/,6/*len*/,32'hB000_0000/*start*/,64'h0/*time*/,12'h004/*seqnum*/,0/*sendat*/, 32'hDEADBEEF/*sid*/);
//Intra burst seq_id error
send_burst_with_seqid_error(8/*count*/,10/*len*/,32'hC000_0000/*start*/,64'h200/*time*/,12'h002/*seqnum*/,1/*sendat*/, 32'hDEADBEEF/*sid*/);
// Inter burst sequence error
send_burst(2/*count*/,10/*len*/,32'hC000_0000/*start*/,64'h300/*time*/,12'h015/*seqnum*/,1/*sendat*/, 32'hDEADBEEF/*sid*/);
// Single Packet burst, timed
//send_packet(3/*count*/,32'hA000_0000/*data*/,64'h100/*time*/,1/*SEQ*/,1/*EOP*/,1/*eob*/,1/*timed*/,0/*odd*/);
// 2 packet burst, timed
//send_packet(3/*count*/,32'hB000_0000/*data*/,64'h200/*time*/,2/*SEQ*/,1/*EOP*/,0/*eob*/,1/*timed*/,0/*odd*/);
//send_packet(3/*count*/,32'hC000_0000/*data*/,64'h0/*time*/,3/*SEQ*/,1/*EOP*/,1/*eob*/,0/*timed*/,0/*odd*/);
// single odd packet
//send_packet(3/*count*/,32'h0A00_0000/*data*/,64'h300/*time*/,4/*SEQ*/,1/*EOP*/,1/*eob*/,1/*timed*/,1/*odd*/);
// 2 packet burst, timed, odd
//send_packet(3/*count*/,32'hD000_0000/*data*/,64'h400/*time*/,5/*SEQ*/,1/*EOP*/,0/*eob*/,1/*timed*/,1/*odd*/);
//send_packet(3/*count*/,32'hE000_0000/*data*/,64'd0/*time*/,6/*SEQ*/,1/*EOP*/,1/*eob*/,0/*timed*/,1/*odd*/);
// 2 packet burst, untimed, no eob set
//send_packet(3/*count*/,32'hF000_0000/*data*/,64'd0/*time*/,7/*SEQ*/,1/*EOP*/,0/*eob*/,0/*timed*/,0/*odd*/);
//send_packet(3/*count*/,32'h9000_0000/*data*/,64'd0/*time*/,8/*SEQ*/,1/*EOP*/,0/*eob*/,0/*timed*/,0/*odd*/);
// single packet late
//send_packet(3/*count*/,32'hD000_0000/*data*/,64'h0/*time*/,4/*SEQ*/,1/*EOP*/,1/*eob*/,1/*timed*/,1/*odd*/);
end
`endif // !`ifdef SIM_SCRIPT
always @(posedge clk)
if(reset)
vita_time <= 0;
else
vita_time <= vita_time + 1;
axi_fifo #(.WIDTH(65)) axi_fifo_short
(.clk(clk), .reset(reset), .clear(1'b0),
.i_tdata({tlast,tdata}), .i_tvalid(tvalid), .i_tready(tready),
.o_tdata({i_tlast,i_tdata}), .o_tvalid(i_tvalid), .o_tready(i_tready));
new_tx_deframer new_tx_deframer
(.clk(clk), .reset(reset), .clear(1'b0),
.i_tdata(i_tdata), .i_tlast(i_tlast), .i_tvalid(i_tvalid), .i_tready(i_tready),
.sample_tdata(sample_tdata), .sample_tvalid(sample_tvalid), .sample_tready(sample_tready));
new_tx_control #(.BASE(SR_TX_CTRL)) new_tx_control
(.clk(clk), .reset(reset), .clear(1'b0),
.set_stb(set_stb), .set_addr(set_addr), .set_data(set_data),
.vita_time(vita_time),
.ack_or_error(ack_or_error), .packet_consumed(packet_consumed),
.seqnum(seqnum), .error_code(error_code), .sid(sid),
.sample_tdata(sample_tdata), .sample_tvalid(sample_tvalid), .sample_tready(sample_tready),
.sample(sample), .run(run), .strobe(strobe),
.debug()
);
wire [63:0] o_tdata;
wire o_tlast, o_tvalid, o_tready;
assign o_tready = 1;
tx_responder #(.BASE(SR_TX_RESPONDER)) tx_responder
(.clk(clk), .reset(reset), .clear(1'b0),
.set_stb(set_stb), .set_addr(set_addr), .set_data(set_data),
.ack_or_error(ack_or_error), .packet_consumed(packet_consumed),
.seqnum(seqnum), .error_code(error_code), .sid(sid),
.vita_time(vita_time),
.o_tdata(o_tdata), .o_tlast(o_tlast), .o_tvalid(o_tvalid), .o_tready(o_tready));
always @(posedge clk)
if(o_tvalid & o_tready)
$display("\t\t\t\t\tRESP %x\t%x",o_tdata,o_tlast);
always @(posedge clk)
if(~reset)
begin
if(strobe & run)
$display("%x\t%x", vita_time, sample);
if(strobe & ~run) $display("Spurious Strobe at time %x",vita_time);
if(packet_consumed) $display("CONSUMED %x", seqnum);
if(ack_or_error)
if(error_code[63:32] == 1)
$display("ACK -- SEQNUM %x", error_code[31:0]);
else
$display("ERROR -- SEQNUM %x ERRCODE %x", error_code[31:0],error_code[63:32]);
end
wire [23:0] tx_fe_i, tx_fe_q;
duc_chain #(.BASE(SR_TX_DSP), .DSPNO(0), .WIDTH(24)) duc_chain
(.clk(clk), .rst(reset), .clr(1'b0),
.set_stb(set_stb),.set_addr(set_addr),.set_data(set_data),
.tx_fe_i(tx_fe_i),.tx_fe_q(tx_fe_q),
.sample(sample), .run(run), .strobe(strobe),
.debug() );
endmodule // new_tx_tb