Files
b210-k7-fpga/lib/simple_gemac/simple_gemac_rx.v
T
+18 6b67702ad7 Merge FPGA repository back into UHD repository
The FPGA codebase was removed from the UHD repository in 2014 to reduce
the size of the repository. However, over the last half-decade, the
split between the repositories has proven more burdensome than it has
been helpful. By merging the FPGA code back, it will be possible to
create atomic commits that touch both FPGA and UHD codebases. Continuous
integration testing is also simplified by merging the repositories,
because it was previously difficult to automatically derive the correct
UHD branch when testing a feature branch on the FPGA repository.

This commit also updates the license files and paths therein.

We are therefore merging the repositories again. Future development for
FPGA code will happen in the same repository as the UHD host code and
MPM code.

== Original Codebase and Rebasing ==

The original FPGA repository will be hosted for the foreseeable future
at its original local location: https://github.com/EttusResearch/fpga/

It can be used for bisecting, reference, and a more detailed history.

The final commit from said repository to be merged here is
05003794e2da61cabf64dd278c45685a7abad7ec. This commit is tagged as
v4.0.0.0-pre-uhd-merge.

If you have changes in the FPGA repository that you want to rebase onto
the UHD repository, simply run the following commands:

- Create a directory to store patches (this should be an empty
  directory):

    mkdir ~/patches

- Now make sure that your FPGA codebase is based on the same state as
  the code that was merged:

    cd src/fpga # Or wherever your FPGA code is stored
    git rebase v4.0.0.0-pre-uhd-merge

  Note: The rebase command may look slightly different depending on what
  exactly you're trying to rebase.

- Create a patch set for your changes versus v4.0.0.0-pre-uhd-merge:

    git format-patch v4.0.0.0-pre-uhd-merge -o ~/patches

  Note: Make sure that only patches are stored in your output directory.
  It should otherwise be empty. Make sure that you picked the correct
  range of commits, and only commits you wanted to rebase were exported
  as patch files.

- Go to the UHD repository and apply the patches:

    cd src/uhd # Or wherever your UHD repository is stored
    git am --directory fpga ~/patches/*
    rm -rf ~/patches # This is for cleanup

== Contributors ==

The following people have contributed mainly to these files (this list
is not complete):

Co-authored-by: Alex Williams <alex.williams@ni.com>
Co-authored-by: Andrej Rode <andrej.rode@ettus.com>
Co-authored-by: Ashish Chaudhari <ashish@ettus.com>
Co-authored-by: Ben Hilburn <ben.hilburn@ettus.com>
Co-authored-by: Ciro Nishiguchi <ciro.nishiguchi@ni.com>
Co-authored-by: Daniel Jepson <daniel.jepson@ni.com>
Co-authored-by: Derek Kozel <derek.kozel@ettus.com>
Co-authored-by: EJ Kreinar <ej@he360.com>
Co-authored-by: Humberto Jimenez <humberto.jimenez@ni.com>
Co-authored-by: Ian Buckley <ian.buckley@gmail.com>
Co-authored-by: Jörg Hofrichter <joerg.hofrichter@ni.com>
Co-authored-by: Jon Kiser <jon.kiser@ni.com>
Co-authored-by: Josh Blum <josh@joshknows.com>
Co-authored-by: Jonathon Pendlum <jonathan.pendlum@ettus.com>
Co-authored-by: Martin Braun <martin.braun@ettus.com>
Co-authored-by: Matt Ettus <matt@ettus.com>
Co-authored-by: Michael West <michael.west@ettus.com>
Co-authored-by: Moritz Fischer <moritz.fischer@ettus.com>
Co-authored-by: Nick Foster <nick@ettus.com>
Co-authored-by: Nicolas Cuervo <nicolas.cuervo@ettus.com>
Co-authored-by: Paul Butler <paul.butler@ni.com>
Co-authored-by: Paul David <paul.david@ettus.com>
Co-authored-by: Ryan Marlow <ryan.marlow@ettus.com>
Co-authored-by: Sugandha Gupta <sugandha.gupta@ettus.com>
Co-authored-by: Sylvain Munaut <tnt@246tNt.com>
Co-authored-by: Trung Tran <trung.tran@ettus.com>
Co-authored-by: Vidush Vishwanath <vidush.vishwanath@ettus.com>
Co-authored-by: Wade Fife <wade.fife@ettus.com>


Original-commit: bafa9d95453387814ef25e6b6256ba8db2df612f
2020-01-28 09:35:36 -08:00

186 lines
5.6 KiB
Verilog

//
// Copyright 2011 Ettus Research LLC
// Copyright 2018 Ettus Research, a National Instruments Company
//
// SPDX-License-Identifier: LGPL-3.0-or-later
//
module simple_gemac_rx
(input reset,
input GMII_RX_CLK, input GMII_RX_DV, input GMII_RX_ER, input [7:0] GMII_RXD,
output rx_clk, output [7:0] rx_data, output reg rx_valid, output rx_error, output reg rx_ack,
input [47:0] ucast_addr, input [47:0] mcast_addr,
input pass_ucast, input pass_mcast, input pass_bcast, input pass_pause, input pass_all,
output reg [15:0] pause_quanta_rcvd, output pause_rcvd,
output [31:0] debug );
localparam RX_IDLE = 0;
localparam RX_PREAMBLE = 1;
localparam RX_FRAME = 2;
localparam RX_GOODFRAME = 3;
localparam RX_DO_PAUSE = 4;
localparam RX_ERROR = 5;
localparam RX_DROP = 6;
localparam RX_PAUSE = 16;
localparam RX_PAUSE_CHK88 = RX_PAUSE + 5;
localparam RX_PAUSE_CHK08 = RX_PAUSE_CHK88 + 1;
localparam RX_PAUSE_CHK00 = RX_PAUSE_CHK08 + 1;
localparam RX_PAUSE_CHK01 = RX_PAUSE_CHK00 + 1;
localparam RX_PAUSE_STORE_MSB = RX_PAUSE_CHK01 + 1;
localparam RX_PAUSE_STORE_LSB = RX_PAUSE_STORE_MSB + 1;
localparam RX_PAUSE_WAIT_CRC = RX_PAUSE_STORE_LSB + 1;
reg [7:0] rxd_d1;
reg rx_dv_d1, rx_er_d1;
assign rx_clk = GMII_RX_CLK;
always @(posedge rx_clk)
begin
rx_dv_d1 <= GMII_RX_DV;
rx_er_d1 <= GMII_RX_ER;
rxd_d1 <= GMII_RXD;
end
reg [7:0] rx_state;
wire [7:0] rxd_del;
wire rx_dv_del, rx_er_del;
reg go_filt;
wire match_crc;
wire clear_crc = rx_state == RX_IDLE;
wire calc_crc = (rx_state == RX_FRAME) | rx_state[7:4]==4'h1;
localparam DELAY = 6;
delay_line #(.WIDTH(10)) rx_delay
(.clk(rx_clk), .delay(DELAY), .din({rx_dv_d1,rx_er_d1,rxd_d1}),.dout({rx_dv_del,rx_er_del,rxd_del}));
always @(posedge rx_clk)
if(reset)
rx_ack <= 0;
else
rx_ack <= (rx_state == RX_GOODFRAME);
wire is_ucast, is_bcast, is_mcast, is_pause, is_any_ucast;
wire keep_packet = (pass_all & is_any_ucast) | (pass_ucast & is_ucast) | (pass_mcast & is_mcast) |
(pass_bcast & is_bcast) | (pass_pause & is_pause);
assign rx_data = rxd_del;
assign rx_error = (rx_state == RX_ERROR);
always @(posedge rx_clk)
if(reset)
rx_valid <= 0;
else if(keep_packet)
rx_valid <= 1;
else if((rx_state == RX_IDLE)|(rx_state == RX_ERROR))
rx_valid <= 0;
address_filter af_ucast (.clk(rx_clk), .reset(reset), .go(go_filt), .data(rxd_d1),
.address(ucast_addr), .match(is_ucast), .done());
address_filter af_mcast (.clk(rx_clk), .reset(reset), .go(go_filt), .data(rxd_d1),
.address(mcast_addr), .match(is_mcast), .done());
address_filter af_bcast (.clk(rx_clk), .reset(reset), .go(go_filt), .data(rxd_d1),
.address(48'hFFFF_FFFF_FFFF), .match(is_bcast), .done());
address_filter af_pause (.clk(rx_clk), .reset(reset), .go(go_filt), .data(rxd_d1),
.address(48'h0180_c200_0001), .match(is_pause), .done());
address_filter_promisc af_promisc (.clk(rx_clk), .reset(reset), .go(go_filt), .data(rxd_d1),
.match(is_any_ucast), .done());
always @(posedge rx_clk)
go_filt <= (rx_state==RX_PREAMBLE) & (rxd_d1 == 8'hD5);
reg [15:0] pkt_len_ctr;
always @(posedge rx_clk)
if(reset |(rx_state == RX_IDLE))
pkt_len_ctr <= 0;
else
pkt_len_ctr <= pkt_len_ctr + 1;
localparam MIN_PAUSE_LEN = 71; // 6
wire pkt_long_enough = (pkt_len_ctr >= MIN_PAUSE_LEN);
always @(posedge rx_clk)
if(reset)
rx_state <= RX_IDLE;
else
if(rx_er_d1 & ~((rxd_d1==8'h0F)&(~rx_dv_d1))) //Handle odd-length pkts from Xilinx IP.
rx_state <= RX_ERROR;
else
case(rx_state)
RX_IDLE :
if(rx_dv_d1)
if(rxd_d1 == 8'h55)
rx_state <= RX_PREAMBLE;
else
rx_state <= RX_ERROR;
RX_PREAMBLE :
if(~rx_dv_d1)
rx_state <= RX_ERROR;
else if(rxd_d1 == 8'hD5)
rx_state <= RX_FRAME;
else if(rxd_d1 != 8'h55)
rx_state <= RX_ERROR;
RX_FRAME :
if(is_pause)
rx_state <= RX_PAUSE;
else if(~rx_dv_d1)
if(match_crc)
rx_state <= RX_GOODFRAME;
else
rx_state <= RX_ERROR;
RX_PAUSE_CHK88 :
if(rxd_d1 != 8'h88)
rx_state <= RX_DROP;
else
rx_state <= RX_PAUSE_CHK08;
RX_PAUSE_CHK08 :
if(rxd_d1 != 8'h08)
rx_state <= RX_DROP;
else
rx_state <= RX_PAUSE_CHK00;
RX_PAUSE_CHK00 :
if(rxd_d1 != 8'h00)
rx_state <= RX_DROP;
else
rx_state <= RX_PAUSE_CHK01;
RX_PAUSE_CHK01 :
if(rxd_d1 != 8'h01)
rx_state <= RX_DROP;
else
rx_state <= RX_PAUSE_STORE_MSB;
RX_PAUSE_WAIT_CRC :
if(pkt_long_enough)
if(match_crc)
rx_state <= RX_DO_PAUSE;
else
rx_state <= RX_DROP;
RX_DO_PAUSE :
rx_state <= RX_IDLE;
RX_GOODFRAME :
rx_state <= RX_IDLE;
RX_DROP, RX_ERROR :
if(~rx_dv_d1)
rx_state <= RX_IDLE;
default
rx_state <= rx_state + 1;
endcase // case (rx_state)
assign pause_rcvd = (rx_state == RX_DO_PAUSE);
crc crc_check(.clk(rx_clk),.reset(reset),.clear(clear_crc),
.data(rxd_d1),.calc(calc_crc),.crc_out(),.match(match_crc));
always @(posedge rx_clk)
if(reset)
pause_quanta_rcvd <= 0;
else if(rx_state == RX_PAUSE_STORE_MSB)
pause_quanta_rcvd[15:8] <= rxd_d1;
else if(rx_state == RX_PAUSE_STORE_LSB)
pause_quanta_rcvd[7:0] <= rxd_d1;
assign debug = rx_state;
endmodule // simple_gemac_rx