adf6f576c6
FPGA: - Split up MB registers that control daughterboard specific settings so that daughterboards 0 and 1 could have different setings, in preparation for future devices that require different settings. This requires a compat number bump to 8.0. - Add registers for additional RFDC information, including the block/tile mapping of the individual channels, and information about resampling capabilities - Identify sections of code that would be specific to X410/ZBX and move them to their own headers, so it's trivial to add device-specific sections of code instead for other devices in the future. - This includes constraints for clocks and I/O pins. - Remove ability to do timed ctrlport transactions to the MB CPLD, this was unused and possibly broken. - Move daughterboard-specific code into its own code location (dboards/zbx) - Move X410-specific register documentation to its own location (doc/X410) - Refactor Makefiles to split out X410/ZBX specific components and allow switching between device types - Add 512-bit AXI interconnects - Make number of timekeepers configurable (X410 keeps the single timekeeper) MPM: - Required compat is bumped to 8.0 - Now supports new registers for detecting DSP capabilities and multi-rate settings for the daughterboards - Adds MMCM controls (currently unused) Co-authored-by: Wade Fife <wade.fife@ni.com> Co-authored-by: Ryan Marlow <ryan@lmarlow.com> Co-authored-by: Martin Braun <martin.braun@ettus.com> Co-authored-by: Humberto Jimenez <humberto.jimenez@ni.com> Original-commit: c1d268917ea65dd9c5a42366014cb96d3c025223
19 lines
637 B
Tcl
19 lines
637 B
Tcl
#
|
|
# Copyright 2022 Ettus Research, a National Instruments Brand
|
|
#
|
|
# SPDX-License-Identifier: LGPL-3.0-or-later
|
|
#
|
|
# Description:
|
|
# Clock definition constraints for X410
|
|
#
|
|
|
|
###############################################################################
|
|
# Motherboard Clocks
|
|
###############################################################################
|
|
|
|
# PLL Reference Clock. Used to derive data clocks.
|
|
# Constrain to the fastest possible clock rate supported in the driver.
|
|
# MPM supports 61.44 / 62.5 / 64.0 MHz.
|
|
set pll_ref_clk_period 15.625
|
|
create_clock -name pll_ref_clk -period $pll_ref_clk_period [get_ports PLL_REFCLK_FPGA_P]
|