miegl/b210-k7-fpga
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

rfnoc: Fix FIR and AXI RAM block register documentation

Browse Source 
Original-commit: e06ff0f5e08458256bf7ffdd3d9c84c4c1046807
This commit is contained in:
Wade Fife
2020-03-05 13:49:38 -06:00
committed by Wade Fife
parent 3810f5a4d9
commit ec9eb36fb9
2 changed files with 11 additions and 9 deletions
Download Patch File Download Diff File Expand all files Collapse all files
lib/rfnoc/blocks/rfnoc_block_axi_ram_fifo/axi_ram_fifo_regs.vh
+9 -7
View File
@@ -14,7 +14,7 @@
localparam RAM_FIFO_ADDR_W = 7;
// REG_FIFO_INFO (R|W)
// REG_FIFO_INFO (R)
//
// Contains info/control bits for the FIFO.
//
@@ -153,13 +153,15 @@ localparam REG_FIFO_PACKET_CNT = 'h28;
// [3] : Continuous mode (run until stopped). When set to 1, test will continue
// to run until Stop bit is set.
//
// [2] : Clear the BIST counters (i.e., the TX, RX, cycle, and error counters)
// [2] : Clear the BIST counters (strobe). Resets the TX, RX, cycle, and error
// counters. This bit is self-clearing.
//
// [1] : Stop BIST (strobe). Write a 1 to this bit to stop the test that is
// currently running
// [1] : Stop BIST (strobe). Write a 1 to this bit to stop the test that is
// currently running. This bit is self-clearing.
//
// [0] : Start BIST (strobe). Write a 1 to this bit to start a test using the
// configured NUM_BYTES and continuous mode setting.
// [0] : Start BIST (strobe). Write a 1 to this bit to start a test using the
// configured NUM_BYTES and continuous mode setting. This bit is
// self-clearing.
//
localparam REG_BIST_CTRL = 'h30;
//
@@ -170,7 +172,7 @@ localparam REG_BIST_STOP_POS = 1; // Strobe
localparam REG_BIST_START_POS = 0; // Strobe
// REG_BIST_CLOCK_RATE (R)
// REG_BIST_CLK_RATE (R)
//
// Reports the clock rate of the BIST component in Hz. This can be used with
// REG_BIST_CYCLE_COUNT to calculate throughput.
lib/rfnoc/blocks/rfnoc_block_fir_filter/rfnoc_fir_filter_regs.vh
+2 -2
View File
@@ -24,7 +24,7 @@ localparam FIR_FILTER_ADDR_W = 4;
localparam REG_FIR_NUM_COEFFS = 'h0;
// REG_FIR_LOAD_COEFF (R)
// REG_FIR_LOAD_COEFF (W)
//
// Register for inputting the next coefficient to be loaded into the filter. To
// load a new set of filter coefficients, write NUM_COEFFS-1 coefficients to
@@ -38,7 +38,7 @@ localparam REG_FIR_NUM_COEFFS = 'h0;
localparam REG_FIR_LOAD_COEFF = 'h4;
// REG_FIR_LOAD_COEFF_LAST (R)
// REG_FIR_LOAD_COEFF_LAST (W)
//
// Register for inputting the last coefficient to be loaded into the filter. To
// load a new set of filter coefficients, write NUM_COEFFS-1 coefficients to