Squashed B200 FPGA Source. Code from Josh Blum, Ian Buckley, and Matt Ettus.

Original-commit: 0df4b801a34697f2058b4a7b95e08d2a0576c9db
2013-10-10 10:17:27 -07:00
commit c91b74de33
488 changed files with 281740 additions and 0 deletions
@@ -0,0 +1,85 @@
+
+
+module catcodec_ddr_cmos
+(
+   //output source sync clock for baseband data
+   output radio_clk,
+
+   //async reset for clocking
+   input arst,
+
+   //control mimo mode
+   input mimo,
+
+   //baseband sample interface
+   output reg [31:0] rx1,
+   output reg [31:0] rx2,
+   input [31:0] tx1,
+   input [31:0] tx2,
+
+   //capture interface
+   input rx_clk,
+   input rx_frame,
+   input [11:0] rx_d,
+
+   //generate interface
+   output tx_clk,
+   output tx_frame,
+   output [11:0] tx_d
+);
+
+   //rx_clk to DCM - creates codec_clk and codec_clk/2
+   wire clk0, clkdv;
+   wire locked;
+   wire codec_rst = !locked;
+
+   DCM_SP #(
+        .CLKDV_DIVIDE(2),
+        .CLK_FEEDBACK("1X")
+   ) DCM_SP_codec_clk
+   (
+        .RST(arst),
+        .CLKIN(rx_clk), .CLKFB(clk0),
+        .CLK0(clk0), .CLKDV(clkdv),
+        .LOCKED(locked)
+   );
+
+   wire codec_clk, half_clk;
+   BUFG BUFG_codec_clk(.I(clk0), .O(codec_clk));
+   BUFG BUFG_half_clk(.I(clkdv), .O(half_clk));
+   BUFGMUX BUFGMUX_radio_clk (.I0(codec_clk), .I1(half_clk), .S(mimo), .O(radio_clk));
+
+   //make codec clock domain mimo mode signal
+   reg mimo_r;
+   always @(posedge codec_clk) mimo_r <= mimo;
+
+   //assign baseband sample interfaces
+   //all samples are registered on strobe
+   wire rx_strobe, tx_strobe;
+   wire [11:0] rx_i0, rx_q0, rx_i1, rx_q1;
+   reg [11:0] tx_i0, tx_q0, tx_i1, tx_q1;
+   //tx mux to feed single channel mode from either input
+   wire [31:0] txm = (mimo_r || (tx1 != 32'b0))? tx1: tx2;
+   always @(posedge codec_clk) begin
+        if (rx_strobe) rx2 <= {rx_i1, 4'b0, rx_q1, 4'b0};
+        if (rx_strobe) rx1 <= {rx_i0, 4'b0, rx_q0, 4'b0};
+        if (tx_strobe) {tx_i0, tx_q0} <= {txm[31:20], txm[15:4]};
+        if (tx_strobe) {tx_i1, tx_q1} <= {tx2[31:20], tx2[15:4]};
+   end
+
+   // CMOS Data interface to catalina, ignore _n pins
+   catcap_ddr_cmos catcap
+     (.data_clk(codec_clk), .reset(codec_rst), .mimo(mimo_r),
+      .rx_frame(rx_frame), .rx_d(rx_d),
+      .rx_clk(/*out*/), .rx_strobe(rx_strobe),
+      .i0(rx_i0), .q0(rx_q0),
+      .i1(rx_i1), .q1(rx_q1));
+
+   catgen_ddr_cmos catgen
+     (.data_clk(tx_clk), .reset(codec_rst), .mimo(mimo_r),
+      .tx_frame(tx_frame), .tx_d(tx_d),
+      .tx_clk(codec_clk), .tx_strobe(tx_strobe),
+      .i0(tx_i0), .q0(tx_q0),
+      .i1(tx_i1), .q1(tx_q1));
+
+endmodule // catcodec_ddr_cmos