Squashed B200 FPGA Source. Code from Josh Blum, Ian Buckley, and Matt Ettus.

Original-commit: 0df4b801a34697f2058b4a7b95e08d2a0576c9db

lib/wishbone/simple_uart_rx.v

@@ -0,0 +1,71 @@
+//
+// Copyright 2011-2013 Ettus Research LLC
+//
+
+
+
+
+module simple_uart_rx
+    #(parameter SIZE=0)
+    (input clk, input rst, 
+     output [7:0] fifo_out, input fifo_read, output [5:0] fifo_level, output fifo_empty, 
+     input [15:0] clkdiv, input rx);
+
+   reg 		  rx_d1, rx_d2;
+   always @(posedge clk)
+     if(rst)
+       {rx_d2,rx_d1} <= 0;
+     else
+       {rx_d2,rx_d1} <= {rx_d1,rx};
+   
+   reg [15:0] 	  baud_ctr;
+   reg [3:0] 	  bit_ctr;
+   reg [7:0] 	  sr;
+
+   wire 	  neg_trans = rx_d2 & ~rx_d1;
+   wire 	  shift_now = baud_ctr == (clkdiv>>1);
+   wire 	  stop_now = (bit_ctr == 10) && shift_now;
+   wire 	  go_now = (bit_ctr == 0) && neg_trans;
+   
+   always @(posedge clk)
+     if(rst)
+       sr <= 0;
+     else if(shift_now)
+       sr <= {rx_d2,sr[7:1]};
+   
+   always @(posedge clk)
+     if(rst)
+       baud_ctr <= 0;
+     else
+       if(go_now)
+	 baud_ctr <= 1;
+       else if(stop_now)
+	 baud_ctr <= 0;
+       else if(baud_ctr >= clkdiv)
+	 baud_ctr <= 1;
+       else if(baud_ctr != 0)
+	 baud_ctr <= baud_ctr + 1;
+
+   always @(posedge clk)
+     if(rst)
+       bit_ctr <= 0;
+     else 
+       if(go_now)
+	 bit_ctr <= 1;
+       else if(stop_now)
+	 bit_ctr <= 0;
+       else if(baud_ctr == clkdiv)
+	 bit_ctr <= bit_ctr + 1;
+
+   wire 	  i_tready, o_tvalid;
+   wire 	  full = ~i_tready;
+   wire 	  write = ~full & rx_d2 & stop_now;
+   assign fifo_empty = ~o_tvalid;
+   
+   axi_fifo #(.WIDTH(8), .SIZE(SIZE)) fifo
+     (.clk(clk),.reset(rst), .clear(1'b0),
+      .i_tdata(sr),.i_tvalid(write),.i_tready(i_tready),
+      .o_tdata(fifo_out),.o_tvalid(o_tvalid),.o_tready(fifo_read),
+      .space(),.occupied(fifo_level) );
+   
+endmodule // simple_uart_rx