mpm/fpga: x4xx: Major updates in preparation for future devices
FPGA: - Split up MB registers that control daughterboard specific settings so that daughterboards 0 and 1 could have different setings, in preparation for future devices that require different settings. This requires a compat number bump to 8.0. - Add registers for additional RFDC information, including the block/tile mapping of the individual channels, and information about resampling capabilities - Identify sections of code that would be specific to X410/ZBX and move them to their own headers, so it's trivial to add device-specific sections of code instead for other devices in the future. - This includes constraints for clocks and I/O pins. - Remove ability to do timed ctrlport transactions to the MB CPLD, this was unused and possibly broken. - Move daughterboard-specific code into its own code location (dboards/zbx) - Move X410-specific register documentation to its own location (doc/X410) - Refactor Makefiles to split out X410/ZBX specific components and allow switching between device types - Add 512-bit AXI interconnects - Make number of timekeepers configurable (X410 keeps the single timekeeper) MPM: - Required compat is bumped to 8.0 - Now supports new registers for detecting DSP capabilities and multi-rate settings for the daughterboards - Adds MMCM controls (currently unused) Co-authored-by: Wade Fife <wade.fife@ni.com> Co-authored-by: Ryan Marlow <ryan@lmarlow.com> Co-authored-by: Martin Braun <martin.braun@ettus.com> Co-authored-by: Humberto Jimenez <humberto.jimenez@ni.com> Original-commit: c1d268917ea65dd9c5a42366014cb96d3c025223
This commit is contained in:
Javier Valenzuela
committed by
Martin Braun
Martin Braun
co-authored by
Wade Fife
Ryan Marlow
Martin Braun
Humberto Jimenez
Wade Fife
Ryan Marlow
Martin Braun
Humberto Jimenez
parent
ffdcc016cc
commit
adf6f576c6
@@ -0,0 +1,32 @@
|
||||
#
|
||||
# Copyright 2022 Ettus Research, a National Instruments Brand
|
||||
#
|
||||
# SPDX-License-Identifier: LGPL-3.0-or-later
|
||||
#
|
||||
|
||||
include $(TOOLS_DIR)/make/viv_ip_builder.mak
|
||||
|
||||
IP_AXI_INTER_4X128_512_ORIG_SRCS = $(addprefix $(IP_DIR)/axi_inter_4x128_512_bd/, \
|
||||
axi_inter_4x128_512_bd.tcl \
|
||||
)
|
||||
|
||||
IP_AXI_INTER_4X128_512_BDTCL_SRCS = $(addprefix $(IP_BUILD_DIR)/axi_inter_4x128_512_bd/, \
|
||||
axi_inter_4x128_512_bd.tcl \
|
||||
)
|
||||
|
||||
IP_AXI_INTER_4X128_512_BD_SRCS = $(addprefix $(IP_BUILD_DIR)/axi_inter_4x128_512_bd/, \
|
||||
axi_inter_4x128_512_bd/axi_inter_4x128_512_bd.bd \
|
||||
)
|
||||
|
||||
BD_AXI_INTER_4X128_512_BD_OUTS = $(addprefix $(IP_BUILD_DIR)/axi_inter_4x128_512_bd/, \
|
||||
axi_inter_4x128_512_bd.bd.out \
|
||||
axi_inter_4x128_512_bd/axi_inter_4x128_512_bd_ooc.xdc \
|
||||
axi_inter_4x128_512_bd/synth/axi_inter_4x128_512_bd.v \
|
||||
)
|
||||
|
||||
.INTERMEDIATE: IP_AXI_INTER_4X128_512_BD_TRGT
|
||||
$(IP_AXI_INTER_4X128_512_BD_SRCS) $(BD_AXI_INTER_4X128_512_BD_OUTS) $(IP_AXI_INTER_4X128_512_BDTCL_SRCS): IP_AXI_INTER_4X128_512_BD_TRGT
|
||||
@:
|
||||
|
||||
IP_AXI_INTER_4X128_512_BD_TRGT: $(IP_AXI_INTER_4X128_512_ORIG_SRCS)
|
||||
$(call BUILD_VIVADO_BDTCL,axi_inter_4x128_512_bd,$(ARCH),$(PART_ID),$(IP_DIR),$(IP_BUILD_DIR),$(LIB_DIR)/vivado_ipi)
|
||||
@@ -0,0 +1,823 @@
|
||||
|
||||
################################################################
|
||||
# This is a generated script based on design: axi_inter_4x128_512_bd
|
||||
#
|
||||
# Though there are limitations about the generated script,
|
||||
# the main purpose of this utility is to make learning
|
||||
# IP Integrator Tcl commands easier.
|
||||
################################################################
|
||||
|
||||
namespace eval _tcl {
|
||||
proc get_script_folder {} {
|
||||
set script_path [file normalize [info script]]
|
||||
set script_folder [file dirname $script_path]
|
||||
return $script_folder
|
||||
}
|
||||
}
|
||||
variable script_folder
|
||||
set script_folder [_tcl::get_script_folder]
|
||||
|
||||
################################################################
|
||||
# Check if script is running in correct Vivado version.
|
||||
################################################################
|
||||
set scripts_vivado_version 2021.1
|
||||
set current_vivado_version [version -short]
|
||||
|
||||
if { [string first $scripts_vivado_version $current_vivado_version] == -1 } {
|
||||
puts ""
|
||||
catch {common::send_gid_msg -ssname BD::TCL -id 2041 -severity "ERROR" "This script was generated using Vivado <$scripts_vivado_version> and is being run in <$current_vivado_version> of Vivado. Please run the script in Vivado <$scripts_vivado_version> then open the design in Vivado <$current_vivado_version>. Upgrade the design by running \"Tools => Report => Report IP Status...\", then run write_bd_tcl to create an updated script."}
|
||||
|
||||
return 1
|
||||
}
|
||||
|
||||
################################################################
|
||||
# START
|
||||
################################################################
|
||||
|
||||
# To test this script, run the following commands from Vivado Tcl console:
|
||||
# source axi_inter_4x128_512_bd_script.tcl
|
||||
|
||||
# If there is no project opened, this script will create a
|
||||
# project, but make sure you do not have an existing project
|
||||
# <./myproj/project_1.xpr> in the current working folder.
|
||||
|
||||
set list_projs [get_projects -quiet]
|
||||
if { $list_projs eq "" } {
|
||||
create_project project_1 myproj -part xczu28dr-ffve1156-2-e
|
||||
}
|
||||
|
||||
|
||||
# CHANGE DESIGN NAME HERE
|
||||
variable design_name
|
||||
set design_name axi_inter_4x128_512_bd
|
||||
|
||||
# If you do not already have an existing IP Integrator design open,
|
||||
# you can create a design using the following command:
|
||||
# create_bd_design $design_name
|
||||
|
||||
# Creating design if needed
|
||||
set errMsg ""
|
||||
set nRet 0
|
||||
|
||||
set cur_design [current_bd_design -quiet]
|
||||
set list_cells [get_bd_cells -quiet]
|
||||
|
||||
if { ${design_name} eq "" } {
|
||||
# USE CASES:
|
||||
# 1) Design_name not set
|
||||
|
||||
set errMsg "Please set the variable <design_name> to a non-empty value."
|
||||
set nRet 1
|
||||
|
||||
} elseif { ${cur_design} ne "" && ${list_cells} eq "" } {
|
||||
# USE CASES:
|
||||
# 2): Current design opened AND is empty AND names same.
|
||||
# 3): Current design opened AND is empty AND names diff; design_name NOT in project.
|
||||
# 4): Current design opened AND is empty AND names diff; design_name exists in project.
|
||||
|
||||
if { $cur_design ne $design_name } {
|
||||
common::send_gid_msg -ssname BD::TCL -id 2001 -severity "INFO" "Changing value of <design_name> from <$design_name> to <$cur_design> since current design is empty."
|
||||
set design_name [get_property NAME $cur_design]
|
||||
}
|
||||
common::send_gid_msg -ssname BD::TCL -id 2002 -severity "INFO" "Constructing design in IPI design <$cur_design>..."
|
||||
|
||||
} elseif { ${cur_design} ne "" && $list_cells ne "" && $cur_design eq $design_name } {
|
||||
# USE CASES:
|
||||
# 5) Current design opened AND has components AND same names.
|
||||
|
||||
set errMsg "Design <$design_name> already exists in your project, please set the variable <design_name> to another value."
|
||||
set nRet 1
|
||||
} elseif { [get_files -quiet ${design_name}.bd] ne "" } {
|
||||
# USE CASES:
|
||||
# 6) Current opened design, has components, but diff names, design_name exists in project.
|
||||
# 7) No opened design, design_name exists in project.
|
||||
|
||||
set errMsg "Design <$design_name> already exists in your project, please set the variable <design_name> to another value."
|
||||
set nRet 2
|
||||
|
||||
} else {
|
||||
# USE CASES:
|
||||
# 8) No opened design, design_name not in project.
|
||||
# 9) Current opened design, has components, but diff names, design_name not in project.
|
||||
|
||||
common::send_gid_msg -ssname BD::TCL -id 2003 -severity "INFO" "Currently there is no design <$design_name> in project, so creating one..."
|
||||
|
||||
create_bd_design $design_name
|
||||
|
||||
common::send_gid_msg -ssname BD::TCL -id 2004 -severity "INFO" "Making design <$design_name> as current_bd_design."
|
||||
current_bd_design $design_name
|
||||
|
||||
}
|
||||
|
||||
common::send_gid_msg -ssname BD::TCL -id 2005 -severity "INFO" "Currently the variable <design_name> is equal to \"$design_name\"."
|
||||
|
||||
if { $nRet != 0 } {
|
||||
catch {common::send_gid_msg -ssname BD::TCL -id 2006 -severity "ERROR" $errMsg}
|
||||
return $nRet
|
||||
}
|
||||
|
||||
set bCheckIPsPassed 1
|
||||
##################################################################
|
||||
# CHECK IPs
|
||||
##################################################################
|
||||
set bCheckIPs 1
|
||||
if { $bCheckIPs == 1 } {
|
||||
set list_check_ips "\
|
||||
xilinx.com:ip:axi_crossbar:2.1\
|
||||
xilinx.com:ip:axi_dwidth_converter:2.1\
|
||||
xilinx.com:ip:axi_register_slice:2.1\
|
||||
"
|
||||
|
||||
set list_ips_missing ""
|
||||
common::send_gid_msg -ssname BD::TCL -id 2011 -severity "INFO" "Checking if the following IPs exist in the project's IP catalog: $list_check_ips ."
|
||||
|
||||
foreach ip_vlnv $list_check_ips {
|
||||
set ip_obj [get_ipdefs -all $ip_vlnv]
|
||||
if { $ip_obj eq "" } {
|
||||
lappend list_ips_missing $ip_vlnv
|
||||
}
|
||||
}
|
||||
|
||||
if { $list_ips_missing ne "" } {
|
||||
catch {common::send_gid_msg -ssname BD::TCL -id 2012 -severity "ERROR" "The following IPs are not found in the IP Catalog:\n $list_ips_missing\n\nResolution: Please add the repository containing the IP(s) to the project." }
|
||||
set bCheckIPsPassed 0
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
if { $bCheckIPsPassed != 1 } {
|
||||
common::send_gid_msg -ssname BD::TCL -id 2023 -severity "WARNING" "Will not continue with creation of design due to the error(s) above."
|
||||
return 3
|
||||
}
|
||||
|
||||
##################################################################
|
||||
# DESIGN PROCs
|
||||
##################################################################
|
||||
|
||||
|
||||
|
||||
# Procedure to create entire design; Provide argument to make
|
||||
# procedure reusable. If parentCell is "", will use root.
|
||||
proc create_root_design { parentCell } {
|
||||
|
||||
variable script_folder
|
||||
variable design_name
|
||||
|
||||
if { $parentCell eq "" } {
|
||||
set parentCell [get_bd_cells /]
|
||||
}
|
||||
|
||||
# Get object for parentCell
|
||||
set parentObj [get_bd_cells $parentCell]
|
||||
if { $parentObj == "" } {
|
||||
catch {common::send_gid_msg -ssname BD::TCL -id 2090 -severity "ERROR" "Unable to find parent cell <$parentCell>!"}
|
||||
return
|
||||
}
|
||||
|
||||
# Make sure parentObj is hier blk
|
||||
set parentType [get_property TYPE $parentObj]
|
||||
if { $parentType ne "hier" } {
|
||||
catch {common::send_gid_msg -ssname BD::TCL -id 2091 -severity "ERROR" "Parent <$parentObj> has TYPE = <$parentType>. Expected to be <hier>."}
|
||||
return
|
||||
}
|
||||
|
||||
# Save current instance; Restore later
|
||||
set oldCurInst [current_bd_instance .]
|
||||
|
||||
# Set parent object as current
|
||||
current_bd_instance $parentObj
|
||||
|
||||
|
||||
# Create interface ports
|
||||
set M0_AXI [ create_bd_intf_port -mode Master -vlnv xilinx.com:interface:aximm_rtl:1.0 M0_AXI ]
|
||||
set_property -dict [ list \
|
||||
CONFIG.ADDR_WIDTH {32} \
|
||||
CONFIG.DATA_WIDTH {512} \
|
||||
CONFIG.FREQ_HZ {350000000} \
|
||||
CONFIG.NUM_READ_OUTSTANDING {2} \
|
||||
CONFIG.NUM_WRITE_OUTSTANDING {2} \
|
||||
CONFIG.PROTOCOL {AXI4} \
|
||||
] $M0_AXI
|
||||
|
||||
set S0_AXI [ create_bd_intf_port -mode Slave -vlnv xilinx.com:interface:aximm_rtl:1.0 S0_AXI ]
|
||||
set_property -dict [ list \
|
||||
CONFIG.ADDR_WIDTH {32} \
|
||||
CONFIG.ARUSER_WIDTH {0} \
|
||||
CONFIG.AWUSER_WIDTH {0} \
|
||||
CONFIG.BUSER_WIDTH {0} \
|
||||
CONFIG.DATA_WIDTH {128} \
|
||||
CONFIG.FREQ_HZ {350000000} \
|
||||
CONFIG.HAS_BRESP {1} \
|
||||
CONFIG.HAS_BURST {1} \
|
||||
CONFIG.HAS_CACHE {1} \
|
||||
CONFIG.HAS_LOCK {1} \
|
||||
CONFIG.HAS_PROT {1} \
|
||||
CONFIG.HAS_QOS {1} \
|
||||
CONFIG.HAS_REGION {1} \
|
||||
CONFIG.HAS_RRESP {1} \
|
||||
CONFIG.HAS_WSTRB {1} \
|
||||
CONFIG.ID_WIDTH {1} \
|
||||
CONFIG.MAX_BURST_LENGTH {256} \
|
||||
CONFIG.NUM_READ_OUTSTANDING {2} \
|
||||
CONFIG.NUM_READ_THREADS {1} \
|
||||
CONFIG.NUM_WRITE_OUTSTANDING {2} \
|
||||
CONFIG.NUM_WRITE_THREADS {1} \
|
||||
CONFIG.PROTOCOL {AXI4} \
|
||||
CONFIG.READ_WRITE_MODE {READ_WRITE} \
|
||||
CONFIG.RUSER_BITS_PER_BYTE {0} \
|
||||
CONFIG.RUSER_WIDTH {0} \
|
||||
CONFIG.SUPPORTS_NARROW_BURST {1} \
|
||||
CONFIG.WUSER_BITS_PER_BYTE {0} \
|
||||
CONFIG.WUSER_WIDTH {0} \
|
||||
] $S0_AXI
|
||||
|
||||
set S1_AXI [ create_bd_intf_port -mode Slave -vlnv xilinx.com:interface:aximm_rtl:1.0 S1_AXI ]
|
||||
set_property -dict [ list \
|
||||
CONFIG.ADDR_WIDTH {32} \
|
||||
CONFIG.ARUSER_WIDTH {0} \
|
||||
CONFIG.AWUSER_WIDTH {0} \
|
||||
CONFIG.BUSER_WIDTH {0} \
|
||||
CONFIG.DATA_WIDTH {128} \
|
||||
CONFIG.FREQ_HZ {350000000} \
|
||||
CONFIG.HAS_BRESP {1} \
|
||||
CONFIG.HAS_BURST {1} \
|
||||
CONFIG.HAS_CACHE {1} \
|
||||
CONFIG.HAS_LOCK {1} \
|
||||
CONFIG.HAS_PROT {1} \
|
||||
CONFIG.HAS_QOS {1} \
|
||||
CONFIG.HAS_REGION {1} \
|
||||
CONFIG.HAS_RRESP {1} \
|
||||
CONFIG.HAS_WSTRB {1} \
|
||||
CONFIG.ID_WIDTH {1} \
|
||||
CONFIG.MAX_BURST_LENGTH {256} \
|
||||
CONFIG.NUM_READ_OUTSTANDING {2} \
|
||||
CONFIG.NUM_READ_THREADS {1} \
|
||||
CONFIG.NUM_WRITE_OUTSTANDING {2} \
|
||||
CONFIG.NUM_WRITE_THREADS {1} \
|
||||
CONFIG.PROTOCOL {AXI4} \
|
||||
CONFIG.READ_WRITE_MODE {READ_WRITE} \
|
||||
CONFIG.RUSER_BITS_PER_BYTE {0} \
|
||||
CONFIG.RUSER_WIDTH {0} \
|
||||
CONFIG.SUPPORTS_NARROW_BURST {1} \
|
||||
CONFIG.WUSER_BITS_PER_BYTE {0} \
|
||||
CONFIG.WUSER_WIDTH {0} \
|
||||
] $S1_AXI
|
||||
|
||||
set S2_AXI [ create_bd_intf_port -mode Slave -vlnv xilinx.com:interface:aximm_rtl:1.0 S2_AXI ]
|
||||
set_property -dict [ list \
|
||||
CONFIG.ADDR_WIDTH {32} \
|
||||
CONFIG.ARUSER_WIDTH {0} \
|
||||
CONFIG.AWUSER_WIDTH {0} \
|
||||
CONFIG.BUSER_WIDTH {0} \
|
||||
CONFIG.DATA_WIDTH {128} \
|
||||
CONFIG.FREQ_HZ {350000000} \
|
||||
CONFIG.HAS_BRESP {1} \
|
||||
CONFIG.HAS_BURST {1} \
|
||||
CONFIG.HAS_CACHE {1} \
|
||||
CONFIG.HAS_LOCK {1} \
|
||||
CONFIG.HAS_PROT {1} \
|
||||
CONFIG.HAS_QOS {1} \
|
||||
CONFIG.HAS_REGION {1} \
|
||||
CONFIG.HAS_RRESP {1} \
|
||||
CONFIG.HAS_WSTRB {1} \
|
||||
CONFIG.ID_WIDTH {1} \
|
||||
CONFIG.MAX_BURST_LENGTH {256} \
|
||||
CONFIG.NUM_READ_OUTSTANDING {2} \
|
||||
CONFIG.NUM_READ_THREADS {1} \
|
||||
CONFIG.NUM_WRITE_OUTSTANDING {2} \
|
||||
CONFIG.NUM_WRITE_THREADS {1} \
|
||||
CONFIG.PROTOCOL {AXI4} \
|
||||
CONFIG.READ_WRITE_MODE {READ_WRITE} \
|
||||
CONFIG.RUSER_BITS_PER_BYTE {0} \
|
||||
CONFIG.RUSER_WIDTH {0} \
|
||||
CONFIG.SUPPORTS_NARROW_BURST {1} \
|
||||
CONFIG.WUSER_BITS_PER_BYTE {0} \
|
||||
CONFIG.WUSER_WIDTH {0} \
|
||||
] $S2_AXI
|
||||
|
||||
set S3_AXI [ create_bd_intf_port -mode Slave -vlnv xilinx.com:interface:aximm_rtl:1.0 S3_AXI ]
|
||||
set_property -dict [ list \
|
||||
CONFIG.ADDR_WIDTH {32} \
|
||||
CONFIG.ARUSER_WIDTH {0} \
|
||||
CONFIG.AWUSER_WIDTH {0} \
|
||||
CONFIG.BUSER_WIDTH {0} \
|
||||
CONFIG.DATA_WIDTH {128} \
|
||||
CONFIG.FREQ_HZ {350000000} \
|
||||
CONFIG.HAS_BRESP {1} \
|
||||
CONFIG.HAS_BURST {1} \
|
||||
CONFIG.HAS_CACHE {1} \
|
||||
CONFIG.HAS_LOCK {1} \
|
||||
CONFIG.HAS_PROT {1} \
|
||||
CONFIG.HAS_QOS {1} \
|
||||
CONFIG.HAS_REGION {1} \
|
||||
CONFIG.HAS_RRESP {1} \
|
||||
CONFIG.HAS_WSTRB {1} \
|
||||
CONFIG.ID_WIDTH {1} \
|
||||
CONFIG.MAX_BURST_LENGTH {256} \
|
||||
CONFIG.NUM_READ_OUTSTANDING {2} \
|
||||
CONFIG.NUM_READ_THREADS {1} \
|
||||
CONFIG.NUM_WRITE_OUTSTANDING {2} \
|
||||
CONFIG.NUM_WRITE_THREADS {1} \
|
||||
CONFIG.PROTOCOL {AXI4} \
|
||||
CONFIG.READ_WRITE_MODE {READ_WRITE} \
|
||||
CONFIG.RUSER_BITS_PER_BYTE {0} \
|
||||
CONFIG.RUSER_WIDTH {0} \
|
||||
CONFIG.SUPPORTS_NARROW_BURST {1} \
|
||||
CONFIG.WUSER_BITS_PER_BYTE {0} \
|
||||
CONFIG.WUSER_WIDTH {0} \
|
||||
] $S3_AXI
|
||||
|
||||
|
||||
# Create ports
|
||||
set M0_AXI_ACLK [ create_bd_port -dir I -type clk -freq_hz 350000000 M0_AXI_ACLK ]
|
||||
set_property -dict [ list \
|
||||
CONFIG.ASSOCIATED_BUSIF {M0_AXI} \
|
||||
CONFIG.ASSOCIATED_RESET {M0_AXI_ARESETN} \
|
||||
] $M0_AXI_ACLK
|
||||
set M0_AXI_ARESETN [ create_bd_port -dir I -type rst M0_AXI_ARESETN ]
|
||||
set_property -dict [ list \
|
||||
CONFIG.POLARITY {ACTIVE_LOW} \
|
||||
] $M0_AXI_ARESETN
|
||||
set S0_AXI_ACLK [ create_bd_port -dir I -type clk -freq_hz 350000000 S0_AXI_ACLK ]
|
||||
set_property -dict [ list \
|
||||
CONFIG.ASSOCIATED_BUSIF {S0_AXI:S1_AXI:S2_AXI:S3_AXI} \
|
||||
CONFIG.ASSOCIATED_RESET {S0_AXI_ARESETN} \
|
||||
] $S0_AXI_ACLK
|
||||
set S0_AXI_ARESETN [ create_bd_port -dir I -type rst S0_AXI_ARESETN ]
|
||||
|
||||
# Create instance: axi_crossbar_0, and set properties
|
||||
set axi_crossbar_0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_crossbar:2.1 axi_crossbar_0 ]
|
||||
set_property -dict [ list \
|
||||
CONFIG.DATA_WIDTH {512} \
|
||||
CONFIG.ID_WIDTH {4} \
|
||||
CONFIG.M00_A01_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M00_A02_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M00_A03_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M00_A04_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M00_A05_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M00_A06_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M00_A07_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M00_A08_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M00_A09_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M00_A10_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M00_A11_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M00_A12_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M00_A13_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M00_A14_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M00_A15_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M01_A00_ADDR_WIDTH {0} \
|
||||
CONFIG.M01_A00_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M01_A01_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M01_A02_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M01_A03_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M01_A04_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M01_A05_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M01_A06_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M01_A07_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M01_A08_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M01_A09_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M01_A10_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M01_A11_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M01_A12_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M01_A13_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M01_A14_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M01_A15_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M02_A00_ADDR_WIDTH {0} \
|
||||
CONFIG.M02_A00_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M02_A01_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M02_A02_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M02_A03_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M02_A04_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M02_A05_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M02_A06_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M02_A07_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M02_A08_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M02_A09_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M02_A10_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M02_A11_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M02_A12_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M02_A13_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M02_A14_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M02_A15_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M03_A00_ADDR_WIDTH {0} \
|
||||
CONFIG.M03_A00_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M03_A01_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M03_A02_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M03_A03_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M03_A04_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M03_A05_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M03_A06_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M03_A07_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M03_A08_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M03_A09_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M03_A10_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M03_A11_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M03_A12_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M03_A13_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M03_A14_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M03_A15_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M04_A00_ADDR_WIDTH {0} \
|
||||
CONFIG.M04_A00_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M04_A01_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M04_A02_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M04_A03_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M04_A04_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M04_A05_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M04_A06_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M04_A07_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M04_A08_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M04_A09_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M04_A10_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M04_A11_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M04_A12_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M04_A13_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M04_A14_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M04_A15_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M05_A00_ADDR_WIDTH {0} \
|
||||
CONFIG.M05_A00_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M05_A01_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M05_A02_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M05_A03_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M05_A04_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M05_A05_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M05_A06_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M05_A07_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M05_A08_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M05_A09_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M05_A10_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M05_A11_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M05_A12_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M05_A13_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M05_A14_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M05_A15_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M06_A00_ADDR_WIDTH {0} \
|
||||
CONFIG.M06_A00_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M06_A01_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M06_A02_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M06_A03_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M06_A04_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M06_A05_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M06_A06_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M06_A07_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M06_A08_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M06_A09_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M06_A10_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M06_A11_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M06_A12_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M06_A13_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M06_A14_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M06_A15_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M07_A00_ADDR_WIDTH {0} \
|
||||
CONFIG.M07_A00_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M07_A01_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M07_A02_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M07_A03_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M07_A04_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M07_A05_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M07_A06_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M07_A07_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M07_A08_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M07_A09_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M07_A10_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M07_A11_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M07_A12_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M07_A13_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M07_A14_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M07_A15_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M08_A00_ADDR_WIDTH {0} \
|
||||
CONFIG.M08_A00_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M08_A01_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M08_A02_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M08_A03_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M08_A04_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M08_A05_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M08_A06_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M08_A07_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M08_A08_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M08_A09_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M08_A10_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M08_A11_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M08_A12_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M08_A13_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M08_A14_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M08_A15_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M09_A00_ADDR_WIDTH {0} \
|
||||
CONFIG.M09_A00_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M09_A01_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M09_A02_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M09_A03_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M09_A04_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M09_A05_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M09_A06_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M09_A07_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M09_A08_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M09_A09_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M09_A10_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M09_A11_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M09_A12_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M09_A13_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M09_A14_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M09_A15_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M10_A00_ADDR_WIDTH {0} \
|
||||
CONFIG.M10_A00_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M10_A01_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M10_A02_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M10_A03_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M10_A04_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M10_A05_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M10_A06_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M10_A07_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M10_A08_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M10_A09_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M10_A10_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M10_A11_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M10_A12_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M10_A13_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M10_A14_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M10_A15_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M11_A00_ADDR_WIDTH {0} \
|
||||
CONFIG.M11_A00_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M11_A01_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M11_A02_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M11_A03_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M11_A04_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M11_A05_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M11_A06_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M11_A07_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M11_A08_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M11_A09_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M11_A10_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M11_A11_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M11_A12_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M11_A13_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M11_A14_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M11_A15_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M12_A00_ADDR_WIDTH {0} \
|
||||
CONFIG.M12_A00_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M12_A01_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M12_A02_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M12_A03_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M12_A04_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M12_A05_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M12_A06_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M12_A07_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M12_A08_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M12_A09_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M12_A10_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M12_A11_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M12_A12_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M12_A13_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M12_A14_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M12_A15_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M13_A00_ADDR_WIDTH {0} \
|
||||
CONFIG.M13_A00_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M13_A01_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M13_A02_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M13_A03_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M13_A04_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M13_A05_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M13_A06_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M13_A07_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M13_A08_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M13_A09_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M13_A10_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M13_A11_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M13_A12_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M13_A13_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M13_A14_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M13_A15_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M14_A00_ADDR_WIDTH {0} \
|
||||
CONFIG.M14_A00_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M14_A01_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M14_A02_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M14_A03_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M14_A04_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M14_A05_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M14_A06_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M14_A07_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M14_A08_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M14_A09_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M14_A10_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M14_A11_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M14_A12_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M14_A13_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M14_A14_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M14_A15_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M15_A00_ADDR_WIDTH {0} \
|
||||
CONFIG.M15_A00_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M15_A01_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M15_A02_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M15_A03_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M15_A04_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M15_A05_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M15_A06_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M15_A07_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M15_A08_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M15_A09_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M15_A10_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M15_A11_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M15_A12_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M15_A13_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M15_A14_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.M15_A15_BASE_ADDR {0xffffffffffffffff} \
|
||||
CONFIG.NUM_MI {1} \
|
||||
CONFIG.NUM_SI {4} \
|
||||
CONFIG.S01_BASE_ID {0x00000004} \
|
||||
CONFIG.S02_BASE_ID {0x00000008} \
|
||||
CONFIG.S03_BASE_ID {0x0000000c} \
|
||||
CONFIG.S04_BASE_ID {0x00000010} \
|
||||
CONFIG.S05_BASE_ID {0x00000014} \
|
||||
CONFIG.S06_BASE_ID {0x00000018} \
|
||||
CONFIG.S07_BASE_ID {0x0000001c} \
|
||||
CONFIG.S08_BASE_ID {0x00000020} \
|
||||
CONFIG.S09_BASE_ID {0x00000024} \
|
||||
CONFIG.S10_BASE_ID {0x00000028} \
|
||||
CONFIG.S11_BASE_ID {0x0000002c} \
|
||||
CONFIG.S12_BASE_ID {0x00000030} \
|
||||
CONFIG.S13_BASE_ID {0x00000034} \
|
||||
CONFIG.S14_BASE_ID {0x00000038} \
|
||||
CONFIG.S15_BASE_ID {0x0000003c} \
|
||||
] $axi_crossbar_0
|
||||
|
||||
# Create instance: axi_dwidth_converter_0, and set properties
|
||||
set axi_dwidth_converter_0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_dwidth_converter:2.1 axi_dwidth_converter_0 ]
|
||||
set_property -dict [ list \
|
||||
CONFIG.ACLK_ASYNC {1} \
|
||||
CONFIG.FIFO_MODE {2} \
|
||||
CONFIG.MI_DATA_WIDTH {512} \
|
||||
CONFIG.SI_DATA_WIDTH {128} \
|
||||
CONFIG.SI_ID_WIDTH {1} \
|
||||
CONFIG.SYNCHRONIZATION_STAGES {3} \
|
||||
] $axi_dwidth_converter_0
|
||||
|
||||
# Create instance: axi_dwidth_converter_1, and set properties
|
||||
set axi_dwidth_converter_1 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_dwidth_converter:2.1 axi_dwidth_converter_1 ]
|
||||
set_property -dict [ list \
|
||||
CONFIG.ACLK_ASYNC {1} \
|
||||
CONFIG.FIFO_MODE {2} \
|
||||
CONFIG.MI_DATA_WIDTH {512} \
|
||||
CONFIG.SI_DATA_WIDTH {128} \
|
||||
CONFIG.SI_ID_WIDTH {1} \
|
||||
CONFIG.SYNCHRONIZATION_STAGES {3} \
|
||||
] $axi_dwidth_converter_1
|
||||
|
||||
# Create instance: axi_dwidth_converter_2, and set properties
|
||||
set axi_dwidth_converter_2 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_dwidth_converter:2.1 axi_dwidth_converter_2 ]
|
||||
set_property -dict [ list \
|
||||
CONFIG.ACLK_ASYNC {1} \
|
||||
CONFIG.FIFO_MODE {2} \
|
||||
CONFIG.MI_DATA_WIDTH {512} \
|
||||
CONFIG.SI_DATA_WIDTH {128} \
|
||||
CONFIG.SI_ID_WIDTH {1} \
|
||||
CONFIG.SYNCHRONIZATION_STAGES {3} \
|
||||
] $axi_dwidth_converter_2
|
||||
|
||||
# Create instance: axi_dwidth_converter_3, and set properties
|
||||
set axi_dwidth_converter_3 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_dwidth_converter:2.1 axi_dwidth_converter_3 ]
|
||||
set_property -dict [ list \
|
||||
CONFIG.ACLK_ASYNC {1} \
|
||||
CONFIG.FIFO_MODE {2} \
|
||||
CONFIG.MI_DATA_WIDTH {512} \
|
||||
CONFIG.SI_DATA_WIDTH {128} \
|
||||
CONFIG.SI_ID_WIDTH {1} \
|
||||
CONFIG.SYNCHRONIZATION_STAGES {3} \
|
||||
] $axi_dwidth_converter_3
|
||||
|
||||
# Create instance: axi_register_slice_0, and set properties
|
||||
set axi_register_slice_0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_register_slice:2.1 axi_register_slice_0 ]
|
||||
set_property -dict [ list \
|
||||
CONFIG.DATA_WIDTH {128} \
|
||||
CONFIG.ID_WIDTH {1} \
|
||||
CONFIG.REG_AR {1} \
|
||||
CONFIG.REG_AW {1} \
|
||||
CONFIG.REG_B {1} \
|
||||
] $axi_register_slice_0
|
||||
|
||||
# Create instance: axi_register_slice_1, and set properties
|
||||
set axi_register_slice_1 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_register_slice:2.1 axi_register_slice_1 ]
|
||||
set_property -dict [ list \
|
||||
CONFIG.DATA_WIDTH {128} \
|
||||
CONFIG.ID_WIDTH {1} \
|
||||
CONFIG.REG_AR {1} \
|
||||
CONFIG.REG_AW {1} \
|
||||
CONFIG.REG_B {1} \
|
||||
] $axi_register_slice_1
|
||||
|
||||
# Create instance: axi_register_slice_2, and set properties
|
||||
set axi_register_slice_2 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_register_slice:2.1 axi_register_slice_2 ]
|
||||
set_property -dict [ list \
|
||||
CONFIG.DATA_WIDTH {128} \
|
||||
CONFIG.ID_WIDTH {1} \
|
||||
CONFIG.REG_AR {1} \
|
||||
CONFIG.REG_AW {1} \
|
||||
CONFIG.REG_B {1} \
|
||||
] $axi_register_slice_2
|
||||
|
||||
# Create instance: axi_register_slice_3, and set properties
|
||||
set axi_register_slice_3 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_register_slice:2.1 axi_register_slice_3 ]
|
||||
set_property -dict [ list \
|
||||
CONFIG.DATA_WIDTH {128} \
|
||||
CONFIG.ID_WIDTH {1} \
|
||||
CONFIG.REG_AR {1} \
|
||||
CONFIG.REG_AW {1} \
|
||||
CONFIG.REG_B {1} \
|
||||
] $axi_register_slice_3
|
||||
|
||||
# Create instance: axi_register_slice_4, and set properties
|
||||
set axi_register_slice_4 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_register_slice:2.1 axi_register_slice_4 ]
|
||||
set_property -dict [ list \
|
||||
CONFIG.DATA_WIDTH {512} \
|
||||
CONFIG.ID_WIDTH {1} \
|
||||
CONFIG.REG_AR {1} \
|
||||
CONFIG.REG_AW {1} \
|
||||
CONFIG.REG_B {1} \
|
||||
] $axi_register_slice_4
|
||||
|
||||
# Create instance: axi_register_slice_5, and set properties
|
||||
set axi_register_slice_5 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_register_slice:2.1 axi_register_slice_5 ]
|
||||
set_property -dict [ list \
|
||||
CONFIG.DATA_WIDTH {512} \
|
||||
CONFIG.ID_WIDTH {1} \
|
||||
CONFIG.REG_AR {1} \
|
||||
CONFIG.REG_AW {1} \
|
||||
CONFIG.REG_B {1} \
|
||||
] $axi_register_slice_5
|
||||
|
||||
# Create instance: axi_register_slice_6, and set properties
|
||||
set axi_register_slice_6 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_register_slice:2.1 axi_register_slice_6 ]
|
||||
set_property -dict [ list \
|
||||
CONFIG.DATA_WIDTH {512} \
|
||||
CONFIG.ID_WIDTH {1} \
|
||||
CONFIG.REG_AR {1} \
|
||||
CONFIG.REG_AW {1} \
|
||||
CONFIG.REG_B {1} \
|
||||
] $axi_register_slice_6
|
||||
|
||||
# Create instance: axi_register_slice_7, and set properties
|
||||
set axi_register_slice_7 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_register_slice:2.1 axi_register_slice_7 ]
|
||||
set_property -dict [ list \
|
||||
CONFIG.DATA_WIDTH {512} \
|
||||
CONFIG.ID_WIDTH {1} \
|
||||
CONFIG.REG_AR {1} \
|
||||
CONFIG.REG_AW {1} \
|
||||
CONFIG.REG_B {1} \
|
||||
] $axi_register_slice_7
|
||||
|
||||
# Create instance: axi_register_slice_8, and set properties
|
||||
set axi_register_slice_8 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_register_slice:2.1 axi_register_slice_8 ]
|
||||
set_property -dict [ list \
|
||||
CONFIG.ID_WIDTH {4} \
|
||||
CONFIG.REG_AR {1} \
|
||||
CONFIG.REG_AW {1} \
|
||||
CONFIG.REG_B {1} \
|
||||
] $axi_register_slice_8
|
||||
|
||||
# Create interface connections
|
||||
connect_bd_intf_net -intf_net S_AXI_0_1 [get_bd_intf_ports S0_AXI] [get_bd_intf_pins axi_register_slice_0/S_AXI]
|
||||
connect_bd_intf_net -intf_net S_AXI_1_1 [get_bd_intf_ports S1_AXI] [get_bd_intf_pins axi_register_slice_1/S_AXI]
|
||||
connect_bd_intf_net -intf_net S_AXI_2_1 [get_bd_intf_ports S2_AXI] [get_bd_intf_pins axi_register_slice_2/S_AXI]
|
||||
connect_bd_intf_net -intf_net S_AXI_3_1 [get_bd_intf_ports S3_AXI] [get_bd_intf_pins axi_register_slice_3/S_AXI]
|
||||
connect_bd_intf_net -intf_net axi_crossbar_0_M00_AXI [get_bd_intf_pins axi_crossbar_0/M00_AXI] [get_bd_intf_pins axi_register_slice_8/S_AXI]
|
||||
connect_bd_intf_net -intf_net axi_dwidth_converter_0_M_AXI [get_bd_intf_pins axi_dwidth_converter_0/M_AXI] [get_bd_intf_pins axi_register_slice_4/S_AXI]
|
||||
connect_bd_intf_net -intf_net axi_dwidth_converter_1_M_AXI [get_bd_intf_pins axi_dwidth_converter_1/M_AXI] [get_bd_intf_pins axi_register_slice_5/S_AXI]
|
||||
connect_bd_intf_net -intf_net axi_dwidth_converter_2_M_AXI [get_bd_intf_pins axi_dwidth_converter_2/M_AXI] [get_bd_intf_pins axi_register_slice_6/S_AXI]
|
||||
connect_bd_intf_net -intf_net axi_dwidth_converter_3_M_AXI [get_bd_intf_pins axi_dwidth_converter_3/M_AXI] [get_bd_intf_pins axi_register_slice_7/S_AXI]
|
||||
connect_bd_intf_net -intf_net axi_register_slice_0_M_AXI [get_bd_intf_pins axi_dwidth_converter_0/S_AXI] [get_bd_intf_pins axi_register_slice_0/M_AXI]
|
||||
connect_bd_intf_net -intf_net axi_register_slice_1_M_AXI [get_bd_intf_pins axi_dwidth_converter_1/S_AXI] [get_bd_intf_pins axi_register_slice_1/M_AXI]
|
||||
connect_bd_intf_net -intf_net axi_register_slice_2_M_AXI [get_bd_intf_pins axi_dwidth_converter_2/S_AXI] [get_bd_intf_pins axi_register_slice_2/M_AXI]
|
||||
connect_bd_intf_net -intf_net axi_register_slice_3_M_AXI [get_bd_intf_pins axi_dwidth_converter_3/S_AXI] [get_bd_intf_pins axi_register_slice_3/M_AXI]
|
||||
connect_bd_intf_net -intf_net axi_register_slice_4_M_AXI [get_bd_intf_pins axi_crossbar_0/S00_AXI] [get_bd_intf_pins axi_register_slice_4/M_AXI]
|
||||
connect_bd_intf_net -intf_net axi_register_slice_5_M_AXI [get_bd_intf_pins axi_crossbar_0/S01_AXI] [get_bd_intf_pins axi_register_slice_5/M_AXI]
|
||||
connect_bd_intf_net -intf_net axi_register_slice_6_M_AXI [get_bd_intf_pins axi_crossbar_0/S02_AXI] [get_bd_intf_pins axi_register_slice_6/M_AXI]
|
||||
connect_bd_intf_net -intf_net axi_register_slice_7_M_AXI [get_bd_intf_pins axi_crossbar_0/S03_AXI] [get_bd_intf_pins axi_register_slice_7/M_AXI]
|
||||
connect_bd_intf_net -intf_net axi_register_slice_8_M_AXI [get_bd_intf_ports M0_AXI] [get_bd_intf_pins axi_register_slice_8/M_AXI]
|
||||
|
||||
# Create port connections
|
||||
connect_bd_net -net S0_AXI_ACLK [get_bd_ports S0_AXI_ACLK] [get_bd_pins axi_dwidth_converter_0/s_axi_aclk] [get_bd_pins axi_dwidth_converter_1/s_axi_aclk] [get_bd_pins axi_dwidth_converter_2/s_axi_aclk] [get_bd_pins axi_dwidth_converter_3/s_axi_aclk] [get_bd_pins axi_register_slice_0/aclk] [get_bd_pins axi_register_slice_1/aclk] [get_bd_pins axi_register_slice_2/aclk] [get_bd_pins axi_register_slice_3/aclk]
|
||||
connect_bd_net -net S0_AXI_ARESETN_1 [get_bd_ports S0_AXI_ARESETN] [get_bd_pins axi_dwidth_converter_0/s_axi_aresetn] [get_bd_pins axi_dwidth_converter_1/s_axi_aresetn] [get_bd_pins axi_dwidth_converter_2/s_axi_aresetn] [get_bd_pins axi_dwidth_converter_3/s_axi_aresetn] [get_bd_pins axi_register_slice_0/aresetn] [get_bd_pins axi_register_slice_1/aresetn] [get_bd_pins axi_register_slice_2/aresetn] [get_bd_pins axi_register_slice_3/aresetn]
|
||||
connect_bd_net -net M0_AXI_ACLK_1 [get_bd_ports M0_AXI_ACLK] [get_bd_pins axi_crossbar_0/aclk] [get_bd_pins axi_dwidth_converter_0/m_axi_aclk] [get_bd_pins axi_dwidth_converter_1/m_axi_aclk] [get_bd_pins axi_dwidth_converter_2/m_axi_aclk] [get_bd_pins axi_dwidth_converter_3/m_axi_aclk] [get_bd_pins axi_register_slice_4/aclk] [get_bd_pins axi_register_slice_5/aclk] [get_bd_pins axi_register_slice_6/aclk] [get_bd_pins axi_register_slice_7/aclk] [get_bd_pins axi_register_slice_8/aclk]
|
||||
connect_bd_net -net M0_AXI_ARESETN_1 [get_bd_ports M0_AXI_ARESETN] [get_bd_pins axi_crossbar_0/aresetn] [get_bd_pins axi_dwidth_converter_0/m_axi_aresetn] [get_bd_pins axi_dwidth_converter_1/m_axi_aresetn] [get_bd_pins axi_dwidth_converter_2/m_axi_aresetn] [get_bd_pins axi_dwidth_converter_3/m_axi_aresetn] [get_bd_pins axi_register_slice_4/aresetn] [get_bd_pins axi_register_slice_5/aresetn] [get_bd_pins axi_register_slice_6/aresetn] [get_bd_pins axi_register_slice_8/aresetn]
|
||||
|
||||
# Create address segments
|
||||
assign_bd_address -offset 0x00000000 -range 0x000100000000 -target_address_space [get_bd_addr_spaces S0_AXI] [get_bd_addr_segs M0_AXI/Reg] -force
|
||||
assign_bd_address -offset 0x00000000 -range 0x000100000000 -target_address_space [get_bd_addr_spaces S1_AXI] [get_bd_addr_segs M0_AXI/Reg] -force
|
||||
assign_bd_address -offset 0x00000000 -range 0x000100000000 -target_address_space [get_bd_addr_spaces S2_AXI] [get_bd_addr_segs M0_AXI/Reg] -force
|
||||
assign_bd_address -offset 0x00000000 -range 0x000100000000 -target_address_space [get_bd_addr_spaces S3_AXI] [get_bd_addr_segs M0_AXI/Reg] -force
|
||||
|
||||
|
||||
# Restore current instance
|
||||
current_bd_instance $oldCurInst
|
||||
|
||||
validate_bd_design
|
||||
save_bd_design
|
||||
}
|
||||
# End of create_root_design()
|
||||
|
||||
|
||||
##################################################################
|
||||
# MAIN FLOW
|
||||
##################################################################
|
||||
|
||||
create_root_design ""
|
||||
|
||||
|
||||
Reference in New Issue
Block a user