fpga: Multiple X300 FPGA bugfixes and enhancements
- Fixed 10GigE firmware communication issues and sequence errors for TX - Multiple changes to help ease timing closure - Cleaned up build scripts - Switched to Xilinx ISE 14.7 as the default build tool for X300 Original-commit: 64d71dcbc5fa6790385b288de25224d386b047b0
This commit is contained in:
Ashish Chaudhari
@@ -0,0 +1,527 @@
|
||||
//------------------------------------------------------------------------------
|
||||
// Title : Top-level Transceiver GT wrapper for Ethernet
|
||||
// Project : Ethernet 1000BASE-X PCS/PMA or SGMII LogiCORE
|
||||
// File : gige_sfp_mdio_transceiver.v
|
||||
// Author : Xilinx
|
||||
//------------------------------------------------------------------------------
|
||||
// (c) Copyright 2009 Xilinx, Inc. All rights reserved.
|
||||
//
|
||||
// This file contains confidential and proprietary information
|
||||
// of Xilinx, Inc. and is protected under U.S. and
|
||||
// international copyright and other intellectual property
|
||||
// laws.
|
||||
//
|
||||
// DISCLAIMER
|
||||
// This disclaimer is not a license and does not grant any
|
||||
// rights to the materials distributed herewith. Except as
|
||||
// otherwise provided in a valid license issued to you by
|
||||
// Xilinx, and to the maximum extent permitted by applicable
|
||||
// law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
|
||||
// WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
|
||||
// AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
|
||||
// BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
|
||||
// INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
|
||||
// (2) Xilinx shall not be liable (whether in contract or tort,
|
||||
// including negligence, or under any other theory of
|
||||
// liability) for any loss or damage of any kind or nature
|
||||
// related to, arising under or in connection with these
|
||||
// materials, including for any direct, or any indirect,
|
||||
// special, incidental, or consequential loss or damage
|
||||
// (including loss of data, profits, goodwill, or any type of
|
||||
// loss or damage suffered as a result of any action brought
|
||||
// by a third party) even if such damage or loss was
|
||||
// reasonably foreseeable or Xilinx had been advised of the
|
||||
// possibility of the same.
|
||||
//
|
||||
// CRITICAL APPLICATIONS
|
||||
// Xilinx products are not designed or intended to be fail-
|
||||
// safe, or for use in any application requiring fail-safe
|
||||
// performance, such as life-support or safety devices or
|
||||
// systems, Class III medical devices, nuclear facilities,
|
||||
// applications related to the deployment of airbags, or any
|
||||
// other applications that could lead to death, personal
|
||||
// injury, or severe property or environmental damage
|
||||
// (individually and collectively, "Critical
|
||||
// Applications"). Customer assumes the sole risk and
|
||||
// liability of any use of Xilinx products in Critical
|
||||
// Applications, subject only to applicable laws and
|
||||
// regulations governing limitations on product liability.
|
||||
//
|
||||
// THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
|
||||
// PART OF THIS FILE AT ALL TIMES.
|
||||
//
|
||||
//
|
||||
//------------------------------------------------------------------------------
|
||||
// Description: This is the top-level Transceiver GT wrapper. It
|
||||
// instantiates the lower-level wrappers produced by
|
||||
// the Series-7 FPGA Transceiver GT Wrapper Wizard.
|
||||
//------------------------------------------------------------------------------
|
||||
|
||||
`timescale 1 ps / 1 ps
|
||||
|
||||
module gige_sfp_mdio_transceiver (
|
||||
input encommaalign,
|
||||
input loopback,
|
||||
input powerdown,
|
||||
input usrclk,
|
||||
input usrclk2,
|
||||
input data_valid,
|
||||
input independent_clock,
|
||||
input txreset,
|
||||
input [7:0] txdata,
|
||||
input txchardispmode,
|
||||
input txchardispval,
|
||||
input txcharisk,
|
||||
input rxreset,
|
||||
output reg rxchariscomma,
|
||||
output reg rxcharisk,
|
||||
output reg [2:0] rxclkcorcnt,
|
||||
output reg [7:0] rxdata,
|
||||
output reg rxdisperr,
|
||||
output reg rxnotintable,
|
||||
output reg rxrundisp,
|
||||
output reg rxbuferr,
|
||||
output reg txbuferr,
|
||||
output plllkdet,
|
||||
output txoutclk,
|
||||
output txn,
|
||||
output txp,
|
||||
input rxn,
|
||||
input rxp,
|
||||
input gtrefclk,
|
||||
input pmareset,
|
||||
input mmcm_locked,
|
||||
output resetdone
|
||||
|
||||
);
|
||||
|
||||
|
||||
//----------------------------------------------------------------------------
|
||||
// Signal declarations
|
||||
//----------------------------------------------------------------------------
|
||||
|
||||
wire cplllock;
|
||||
wire gt_reset_rx;
|
||||
wire gt_reset_tx;
|
||||
wire resetdone_tx;
|
||||
wire resetdone_rx;
|
||||
wire pcsreset;
|
||||
(* KEEP = "TRUE" *) reg data_valid_reg;
|
||||
wire data_valid_reg2;
|
||||
|
||||
wire [2:0] rxbufstatus;
|
||||
wire [1:0] txbufstatus;
|
||||
reg [2:0] rxbufstatus_reg;
|
||||
reg [1:0] txbufstatus_reg;
|
||||
wire [1:0] rxclkcorcnt_int;
|
||||
reg txpowerdown_reg = 1'b0;
|
||||
reg txpowerdown_double = 1'b0;
|
||||
reg txpowerdown = 1'b0;
|
||||
wire [1:0] txpowerdown_int;
|
||||
|
||||
// signal used to control sampling during bus width conversions
|
||||
reg toggle;
|
||||
|
||||
// signals reclocked onto the 62.5MHz userclk source of the GT transceiver
|
||||
wire encommaalign_int;
|
||||
wire txreset_int;
|
||||
wire rxreset_int;
|
||||
|
||||
// Register transmitter signals from the core
|
||||
reg [7:0] txdata_reg;
|
||||
reg txchardispmode_reg;
|
||||
reg txchardispval_reg;
|
||||
reg txcharisk_reg;
|
||||
|
||||
// Signals for data bus width doubling on the transmitter path from the core
|
||||
// to the GT transceiver
|
||||
reg [15:0] txdata_double;
|
||||
reg [1:0] txchardispmode_double;
|
||||
reg [1:0] txchardispval_double;
|
||||
reg [1:0] txcharisk_double;
|
||||
|
||||
// Double width signals reclocked onto the 62.5MHz userclk source of the GT
|
||||
// transceiver
|
||||
reg [15:0] txdata_int;
|
||||
reg [1:0] txchardispmode_int;
|
||||
reg [1:0] txchardispval_int;
|
||||
reg [1:0] txcharisk_int;
|
||||
|
||||
// Double width signals output from the GT transceiver on the 62.5MHz clock
|
||||
// source
|
||||
wire [1:0] rxchariscomma_int;
|
||||
wire [1:0] rxcharisk_int;
|
||||
wire [15:0] rxdata_int;
|
||||
wire [1:0] rxdisperr_int;
|
||||
wire [1:0] rxnotintable_int;
|
||||
wire [1:0] rxrundisp_int;
|
||||
|
||||
// Double width signals reclocked on the GT's 62.5MHz clock source
|
||||
reg [1:0] rxchariscomma_reg;
|
||||
reg [1:0] rxcharisk_reg;
|
||||
reg [15:0] rxdata_reg;
|
||||
reg [1:0] rxdisperr_reg;
|
||||
reg [1:0] rxnotintable_reg;
|
||||
reg [1:0] rxrundisp_reg;
|
||||
reg rxpowerdown_reg = 1'b0;
|
||||
|
||||
// Double width signals reclocked onto the 125MHz clock source
|
||||
reg [1:0] rxchariscomma_double;
|
||||
reg [1:0] rxcharisk_double;
|
||||
reg [15:0] rxdata_double;
|
||||
reg [1:0] rxdisperr_double;
|
||||
reg [1:0] rxnotintable_double;
|
||||
reg [1:0] rxrundisp_double;
|
||||
reg rxpowerdown_double = 1'b0;
|
||||
|
||||
reg rxpowerdown = 1'b0;
|
||||
wire [1:0] rxpowerdown_int;
|
||||
|
||||
|
||||
assign txpowerdown_int = {2{txpowerdown}};
|
||||
assign rxpowerdown_int = {2{rxpowerdown}};
|
||||
|
||||
//---------------------------------------------------------------------------
|
||||
// The core works from a 125MHz clock source, the GT transceiver fabric
|
||||
// interface works from a 62.5MHz clock source. The following signals
|
||||
// sourced by the core therefore need to be reclocked onto the 62.5MHz
|
||||
// clock
|
||||
//---------------------------------------------------------------------------
|
||||
|
||||
// Reclock encommaalign
|
||||
gige_sfp_mdio_reset_sync reclock_encommaalign
|
||||
(
|
||||
.clk (usrclk),
|
||||
.reset_in (encommaalign),
|
||||
.reset_out (encommaalign_int)
|
||||
);
|
||||
|
||||
|
||||
// Reclock txreset
|
||||
gige_sfp_mdio_reset_sync reclock_txreset
|
||||
(
|
||||
.clk (usrclk),
|
||||
.reset_in (txreset),
|
||||
.reset_out (txreset_int)
|
||||
);
|
||||
|
||||
|
||||
// Reclock rxreset
|
||||
gige_sfp_mdio_reset_sync reclock_rxreset
|
||||
(
|
||||
.clk (usrclk),
|
||||
.reset_in (rxreset),
|
||||
.reset_out (rxreset_int)
|
||||
);
|
||||
|
||||
|
||||
//---------------------------------------------------------------------------
|
||||
// toggle signal used to control sampling during bus width conversions
|
||||
//---------------------------------------------------------------------------
|
||||
|
||||
always @(posedge usrclk2)
|
||||
begin
|
||||
if (txreset) begin
|
||||
toggle <= 1'b0;
|
||||
end
|
||||
else begin
|
||||
toggle <= !toggle;
|
||||
end
|
||||
end
|
||||
|
||||
|
||||
//---------------------------------------------------------------------------
|
||||
// The core works from a 125MHz clock source, the GT transceiver fabric
|
||||
// interface works from a 62.5MHz clock source. The following signals
|
||||
// sourced by the core therefore need to be converted to double width, then
|
||||
// resampled on the GT's 62.5MHz clock
|
||||
//---------------------------------------------------------------------------
|
||||
|
||||
// Reclock the transmitter signals
|
||||
always @(posedge usrclk2)
|
||||
begin
|
||||
if (txreset) begin
|
||||
txdata_reg <= 8'b0;
|
||||
txchardispmode_reg <= 1'b0;
|
||||
txchardispval_reg <= 1'b0;
|
||||
txcharisk_reg <= 1'b0;
|
||||
txpowerdown_reg <= 1'b0;
|
||||
end
|
||||
else begin
|
||||
txdata_reg <= txdata;
|
||||
txchardispmode_reg <= txchardispmode;
|
||||
txchardispval_reg <= txchardispval;
|
||||
txcharisk_reg <= txcharisk;
|
||||
txpowerdown_reg <= powerdown;
|
||||
end
|
||||
end
|
||||
|
||||
|
||||
// Double the data width
|
||||
always @(posedge usrclk2)
|
||||
begin
|
||||
if (txreset) begin
|
||||
txdata_double <= 16'b0;
|
||||
txchardispmode_double <= 2'b0;
|
||||
txchardispval_double <= 2'b0;
|
||||
txcharisk_double <= 2'b0;
|
||||
txpowerdown_double <= 1'b0;
|
||||
end
|
||||
else begin
|
||||
if (!toggle) begin
|
||||
txdata_double[7:0] <= txdata_reg;
|
||||
txchardispmode_double[0] <= txchardispmode_reg;
|
||||
txchardispval_double[0] <= txchardispval_reg;
|
||||
txcharisk_double[0] <= txcharisk_reg;
|
||||
txdata_double[15:8] <= txdata;
|
||||
txchardispmode_double[1] <= txchardispmode;
|
||||
txchardispval_double[1] <= txchardispval;
|
||||
txcharisk_double[1] <= txcharisk;
|
||||
end
|
||||
txpowerdown_double <= txpowerdown_reg;
|
||||
end
|
||||
end
|
||||
|
||||
|
||||
// Cross the clock domain
|
||||
always @(posedge usrclk)
|
||||
begin
|
||||
txdata_int <= txdata_double;
|
||||
txchardispmode_int <= txchardispmode_double;
|
||||
txchardispval_int <= txchardispval_double;
|
||||
txcharisk_int <= txcharisk_double;
|
||||
txbufstatus_reg <= txbufstatus;
|
||||
txpowerdown <= txpowerdown_double;
|
||||
end
|
||||
|
||||
|
||||
|
||||
//---------------------------------------------------------------------------
|
||||
// The core works from a 125MHz clock source, the GT transceiver fabric
|
||||
// interface works from a 62.5MHz clock source. The following signals
|
||||
// sourced by the GT transceiver therefore need to converted to half width
|
||||
//---------------------------------------------------------------------------
|
||||
|
||||
// Sample the double width received data from the GT transsciever on the GT's
|
||||
// 62.5MHz clock
|
||||
always @(posedge usrclk)
|
||||
begin
|
||||
rxchariscomma_reg <= rxchariscomma_int;
|
||||
rxcharisk_reg <= rxcharisk_int;
|
||||
rxdata_reg <= rxdata_int;
|
||||
rxdisperr_reg <= rxdisperr_int;
|
||||
rxnotintable_reg <= rxnotintable_int;
|
||||
rxrundisp_reg <= rxrundisp_int;
|
||||
rxbufstatus_reg <= rxbufstatus;
|
||||
rxpowerdown <= rxpowerdown_reg;
|
||||
end
|
||||
|
||||
|
||||
// Reclock the double width received data from the GT transsciever onto the
|
||||
// 125MHz clock source. Both clock domains are frequency related and are
|
||||
// derived from the same MMCM: the Xilinx tools will accont for this.
|
||||
|
||||
always @(posedge usrclk2)
|
||||
begin
|
||||
if (rxreset) begin
|
||||
rxchariscomma_double <= 2'b0;
|
||||
rxcharisk_double <= 2'b0;
|
||||
rxdata_double <= 16'b0;
|
||||
rxdisperr_double <= 2'b0;
|
||||
rxnotintable_double <= 2'b0;
|
||||
rxrundisp_double <= 2'b0;
|
||||
rxpowerdown_double <= 1'b0;
|
||||
end
|
||||
else if (toggle) begin
|
||||
rxchariscomma_double <= rxchariscomma_reg;
|
||||
rxcharisk_double <= rxcharisk_reg;
|
||||
rxdata_double <= rxdata_reg;
|
||||
rxdisperr_double <= rxdisperr_reg;
|
||||
rxnotintable_double <= rxnotintable_reg;
|
||||
rxrundisp_double <= rxrundisp_reg;
|
||||
end
|
||||
rxpowerdown_double <= powerdown;
|
||||
end
|
||||
|
||||
|
||||
// Halve the bus width
|
||||
always @(posedge usrclk2)
|
||||
begin
|
||||
if (rxreset) begin
|
||||
rxchariscomma <= 1'b0;
|
||||
rxcharisk <= 1'b0;
|
||||
rxdata <= 8'b0;
|
||||
rxdisperr <= 1'b0;
|
||||
rxnotintable <= 1'b0;
|
||||
rxrundisp <= 1'b0;
|
||||
rxpowerdown_reg <= 1'b0;
|
||||
end
|
||||
else begin
|
||||
if (!toggle) begin
|
||||
rxchariscomma <= rxchariscomma_double[0];
|
||||
rxcharisk <= rxcharisk_double[0];
|
||||
rxdata <= rxdata_double[7:0];
|
||||
rxdisperr <= rxdisperr_double[0];
|
||||
rxnotintable <= rxnotintable_double[0];
|
||||
rxrundisp <= rxrundisp_double[0];
|
||||
end
|
||||
else begin
|
||||
rxchariscomma <= rxchariscomma_double[1];
|
||||
rxcharisk <= rxcharisk_double[1];
|
||||
rxdata <= rxdata_double[15:8];
|
||||
rxdisperr <= rxdisperr_double[1];
|
||||
rxnotintable <= rxnotintable_double[1];
|
||||
rxrundisp <= rxrundisp_double[1];
|
||||
end
|
||||
rxpowerdown_reg <= rxpowerdown_double;
|
||||
end
|
||||
end
|
||||
|
||||
|
||||
//---------------------------------------------------------------------------
|
||||
// Instantiate the Series-7 GTX
|
||||
//---------------------------------------------------------------------------
|
||||
// Direct from the Transceiver Wizard output
|
||||
gige_sfp_mdio_GTWIZARD_init #
|
||||
(
|
||||
.EXAMPLE_SIM_GTRESET_SPEEDUP ("TRUE")
|
||||
)
|
||||
gtwizard_inst
|
||||
(
|
||||
.SYSCLK_IN (independent_clock),
|
||||
.SOFT_RESET_IN (pmareset),
|
||||
.GT0_TX_FSM_RESET_DONE_OUT (),
|
||||
.GT0_RX_FSM_RESET_DONE_OUT (),
|
||||
.GT0_DATA_VALID_IN (data_valid_reg2),
|
||||
//----------------------- Channel - Ref Clock Ports //------------------
|
||||
.GT0_GTREFCLK0_IN (gtrefclk),
|
||||
//------------------------------ Channel PLL //-------------------------
|
||||
.GT0_CPLLFBCLKLOST_OUT (),
|
||||
.GT0_CPLLLOCK_OUT (cplllock),
|
||||
.GT0_CPLLLOCKDETCLK_IN (independent_clock),
|
||||
.GT0_CPLLRESET_IN (pmareset),
|
||||
//----------------------------- Eye Scan Ports //-----------------------
|
||||
.GT0_EYESCANDATAERROR_OUT (),
|
||||
//---------------------- Loopback and Powerdown Ports //----------------
|
||||
.GT0_LOOPBACK_IN (3'b0),
|
||||
.GT0_RXPD_IN (rxpowerdown_int),
|
||||
.GT0_TXPD_IN (txpowerdown_int),
|
||||
//----------------------------- Receive Ports --------------------------
|
||||
.GT0_RXUSERRDY_IN (mmcm_locked),
|
||||
//--------------------- Receive Ports - 8b10b Decoder //----------------
|
||||
.GT0_RXCHARISCOMMA_OUT (rxchariscomma_int),
|
||||
.GT0_RXCHARISK_OUT (rxcharisk_int),
|
||||
.GT0_RXDISPERR_OUT (rxdisperr_int),
|
||||
.GT0_RXNOTINTABLE_OUT (rxnotintable_int),
|
||||
//----------------- Receive Ports - Clock Correction Ports //-----------
|
||||
.GT0_RXCLKCORCNT_OUT (rxclkcorcnt_int),
|
||||
//------------- Receive Ports - Comma Detection and Alignment //--------
|
||||
.GT0_RXMCOMMAALIGNEN_IN (encommaalign_int),
|
||||
.GT0_RXPCOMMAALIGNEN_IN (encommaalign_int),
|
||||
//----------------- Receive Ports - RX Data Path interface //-----------
|
||||
.GT0_GTRXRESET_IN (gt_reset_rx),
|
||||
// .GT0_GTRXRESET_IN (rxreset_int),
|
||||
.GT0_RXDATA_OUT (rxdata_int),
|
||||
.GT0_RXOUTCLK_OUT (),
|
||||
.GT0_RXUSRCLK_IN (usrclk),
|
||||
.GT0_RXUSRCLK2_IN (usrclk),
|
||||
//---------- Receive Ports - RX Decision Feedback Equalizer(DFE) -----------
|
||||
.GT0_RXDFELPMRESET_IN (1'b0),
|
||||
.GT0_RXMONITOROUT_OUT (),
|
||||
.GT0_RXMONITORSEL_IN (2'b0),
|
||||
//----- Receive Ports - RX Driver),OOB signalling),Coupling and Eq.),CDR //
|
||||
.GT0_GTXRXN_IN (rxn),
|
||||
.GT0_GTXRXP_IN (rxp),
|
||||
.GT0_RXCDRLOCK_OUT (),
|
||||
//------ Receive Ports - RX Elastic Buffer and Phase Alignment Ports //-
|
||||
.GT0_RXBUFRESET_IN (rxreset_int),
|
||||
.GT0_RXBUFSTATUS_OUT (rxbufstatus),
|
||||
//---------------------- Receive Ports - RX PLL Ports //----------------
|
||||
.GT0_RXRESETDONE_OUT (resetdone_rx),
|
||||
//----------------------------- Transmit Ports -------------------------
|
||||
.GT0_TXUSERRDY_IN (mmcm_locked),
|
||||
//-------------- Transmit Ports - 8b10b Encoder Control Ports //--------
|
||||
.GT0_TXCHARDISPMODE_IN (txchardispmode_int),
|
||||
.GT0_TXCHARDISPVAL_IN (txchardispval_int),
|
||||
.GT0_TXCHARISK_IN (txcharisk_int),
|
||||
//---------------- Transmit Ports - TX Data Path interface //-----------
|
||||
.GT0_GTTXRESET_IN (gt_reset_tx),
|
||||
// .GT0_GTTXRESET_IN (txreset_int),
|
||||
.GT0_TXDATA_IN (txdata_int),
|
||||
.GT0_TXOUTCLK_OUT (txoutclk),
|
||||
.GT0_TXOUTCLKFABRIC_OUT (),
|
||||
.GT0_TXOUTCLKPCS_OUT (),
|
||||
//.GT0_TXPCSRESET_IN (pcsreset),
|
||||
.GT0_TXUSRCLK_IN (usrclk),
|
||||
.GT0_TXUSRCLK2_IN (usrclk),
|
||||
//-------------- Transmit Ports - TX Driver and OOB signaling //--------
|
||||
.GT0_GTXTXN_OUT (txn),
|
||||
.GT0_GTXTXP_OUT (txp),
|
||||
//--------- Transmit Ports - TX Elastic Buffer and Phase Alignment //---
|
||||
.GT0_TXBUFSTATUS_OUT (txbufstatus),
|
||||
//--------------------- Transmit Ports - TX PLL Ports //----------------
|
||||
.GT0_TXRESETDONE_OUT (resetdone_tx),
|
||||
//--------------- Transmit Ports - TX Ports for PCI Express ----------------
|
||||
.GT0_TXELECIDLE_IN (txpowerdown),
|
||||
//____________________________COMMON PORTS________________________________
|
||||
//-------------------- Common Block - Ref Clock Ports ---------------------
|
||||
.GT0_GTREFCLK0_COMMON_IN (gtrefclk),
|
||||
//----------------------- Common Block - QPLL Ports ------------------------
|
||||
.GT0_QPLLLOCK_OUT () ,
|
||||
.GT0_QPLLLOCKDETCLK_IN (independent_clock),
|
||||
.GT0_QPLLRESET_IN (1'b0)
|
||||
|
||||
);
|
||||
|
||||
|
||||
// Hold the transmitter and receiver paths of the GT transceiver in reset
|
||||
// until the PLL has locked.
|
||||
assign gt_reset_rx = (rxreset_int & resetdone_rx);
|
||||
assign gt_reset_tx = (txreset_int & resetdone_tx);
|
||||
|
||||
|
||||
// Output the PLL locked status
|
||||
assign plllkdet = cplllock;
|
||||
|
||||
|
||||
// Report overall status for both transmitter and receiver reset done signals
|
||||
assign resetdone = cplllock ;
|
||||
|
||||
|
||||
// reset to PCS part of GT
|
||||
assign pcsreset = !mmcm_locked;
|
||||
|
||||
// temporary
|
||||
assign rxrundisp_int = 2'b0;
|
||||
|
||||
|
||||
// Decode the GT transceiver buffer status signals
|
||||
always @(posedge usrclk2)
|
||||
begin
|
||||
rxbuferr <= rxbufstatus_reg[2];
|
||||
txbuferr <= txbufstatus_reg[1];
|
||||
rxclkcorcnt <= {1'b0, rxclkcorcnt_int};
|
||||
end
|
||||
|
||||
//---------------------------------------------------------------------------
|
||||
// The core works from a 125MHz clock source userclk2, the init statemachines
|
||||
// work at 200 MHz.
|
||||
//---------------------------------------------------------------------------
|
||||
|
||||
// Cross the clock domain
|
||||
always @(posedge usrclk2)
|
||||
begin
|
||||
data_valid_reg <= data_valid;
|
||||
end
|
||||
|
||||
|
||||
gige_sfp_mdio_sync_block sync_block_data_valid
|
||||
(
|
||||
.clk (independent_clock),
|
||||
.data_in (data_valid_reg),
|
||||
.data_out (data_valid_reg2)
|
||||
);
|
||||
|
||||
|
||||
|
||||
endmodule
|
||||
Reference in New Issue
Block a user