fpga: x400: Add support for X410 motherboard FPGA

Co-authored-by: Andrew Moch <Andrew.Moch@ni.com>
Co-authored-by: Daniel Jepson <daniel.jepson@ni.com>
Co-authored-by: Javier Valenzuela <javier.valenzuela@ni.com>
Co-authored-by: Joerg Hofrichter <joerg.hofrichter@ni.com>
Co-authored-by: Kumaran Subramoniam <kumaran.subramoniam@ni.com>
Co-authored-by: Max Köhler <max.koehler@ni.com>
Co-authored-by: Michael Auchter <michael.auchter@ni.com>
Co-authored-by: Paul Butler <paul.butler@ni.com>
Co-authored-by: Wade Fife <wade.fife@ettus.com>
Co-authored-by: Hector Rubio <hrubio@ni.com>


Original-commit: 6d3765605262016a80f71e36357f749ea35cbe5a

top/x400/rf/common/capture_sysref.v

@@ -0,0 +1,50 @@
+//
+// Copyright 2021 Ettus Research, a National Instruments Brand
+//
+// SPDX-License-Identifier: LGPL-3.0-or-later
+//
+// Module: capture_sysref
+//
+// Description:
+//
+//   Capture SYSREF and transfer it to the higher clock domain. Module incurs
+//   in 2 pll_ref_clk cycles + 1 rfdc_clk cycle of delay.
+//
+
+module capture_sysref (
+  // Clocks
+  input  wire pll_ref_clk,
+  input  wire rfdc_clk,
+
+  // SYSREF input and control
+  input  wire sysref_in,       // Single-ended SYSREF (previously buffered)
+  input  wire enable_rclk,     // Enables SYSREF output in the rfdc_clk domain.
+
+  // Captured SYSREF outputs
+  output wire sysref_out_pclk, // Debug output (Domain: pll_ref_clk).
+  output wire sysref_out_rclk  // RFDC output  (Domain: rfdc_clk).
+);
+
+  reg sysref_pclk_ms = 1'b0, sysref_pclk = 1'b0, sysref_rclk = 1'b0;
+
+  // Capture SYSREF synchronously with the pll_ref_clk, but double-sync it just
+  // in case static timing isn't met so as not to destroy downstream logic.
+  always @ (posedge pll_ref_clk) begin
+    sysref_pclk_ms <= sysref_in;
+    sysref_pclk    <= sysref_pclk_ms;
+  end
+
+  assign sysref_out_pclk = sysref_pclk;
+
+  // Transfer to faster clock which is edge-aligned with the pll_ref_clk.
+  always @ (posedge rfdc_clk) begin
+    if (enable_rclk) begin
+      sysref_rclk <= sysref_pclk;
+    end else begin
+      sysref_rclk <= 1'b0;
+    end
+  end
+
+  assign sysref_out_rclk = sysref_rclk;
+
+endmodule