fpga: x400: Add support for X410 motherboard FPGA

Co-authored-by: Andrew Moch <Andrew.Moch@ni.com>
Co-authored-by: Daniel Jepson <daniel.jepson@ni.com>
Co-authored-by: Javier Valenzuela <javier.valenzuela@ni.com>
Co-authored-by: Joerg Hofrichter <joerg.hofrichter@ni.com>
Co-authored-by: Kumaran Subramoniam <kumaran.subramoniam@ni.com>
Co-authored-by: Max Köhler <max.koehler@ni.com>
Co-authored-by: Michael Auchter <michael.auchter@ni.com>
Co-authored-by: Paul Butler <paul.butler@ni.com>
Co-authored-by: Wade Fife <wade.fife@ettus.com>
Co-authored-by: Hector Rubio <hrubio@ni.com>


Original-commit: 6d3765605262016a80f71e36357f749ea35cbe5a

top/x400/qsfp_led_controller.v

@@ -0,0 +1,107 @@
+//
+// Copyright 2021 Ettus Research, A National Instruments Brand
+//
+// SPDX-License-Identifier: LGPL-3.0-or-later
+//
+// Module: qsfp_led_controller
+//
+// Description:
+//
+//   Translate the CLIP active and link LED signals on FPGA to control port
+//   requests in order to transfer them to the CPLD, which drives the LEDs
+//
+// Parameters:
+//
+//   LED_REGISTER_ADDRESS : Address of LED register within CPLD.
+//
+
+`default_nettype none
+
+
+module qsfp_led_controller #(
+  parameter LED_REGISTER_ADDRESS = 0
+) (
+  // Common ControlPort signals
+  input wire ctrlport_clk,
+  input wire ctrlport_rst,
+
+  // ControlPort request
+  output reg         m_ctrlport_req_wr,
+  output wire        m_ctrlport_req_rd,
+  output wire [19:0] m_ctrlport_req_addr,
+  output wire [31:0] m_ctrlport_req_data,
+  output wire [ 3:0] m_ctrlport_req_byte_en,
+
+  // ControlPort response
+  input wire        m_ctrlport_resp_ack,
+  input wire [ 1:0] m_ctrlport_resp_status,
+  input wire [31:0] m_ctrlport_resp_data,
+
+  // QSFP port LED signals
+  input wire [3:0] qsfp0_led_active,
+  input wire [3:0] qsfp0_led_link,
+  input wire [3:0] qsfp1_led_active,
+  input wire [3:0] qsfp1_led_link
+);
+
+  //----------------------------------------------------------
+  // Transfer LED signals to local clock domain
+  //----------------------------------------------------------
+
+  wire [15:0] led_combined;
+
+  synchronizer #(
+    .WIDTH            (16),
+    .STAGES           (2),
+    .INITIAL_VAL      (0),
+    .FALSE_PATH_TO_IN (1)
+  ) synchronizer_i (
+    .clk (ctrlport_clk),
+    .rst (ctrlport_rst),
+    .in  ({qsfp1_led_active, qsfp1_led_link, qsfp0_led_active, qsfp0_led_link}),
+    .out (led_combined)
+  );
+
+  //----------------------------------------------------------
+  // Logic to wait for response after trigging request
+  //----------------------------------------------------------
+
+  reg transfer_in_progress;
+  reg [15:0] led_combined_delayed;
+
+  always @(posedge ctrlport_clk) begin
+    if (ctrlport_rst) begin
+      m_ctrlport_req_wr <= 1'b0;
+      transfer_in_progress <= 1'b0;
+      led_combined_delayed <= 16'b0;
+    end else begin
+      // Default assignment
+      m_ctrlport_req_wr <= 1'b0;
+
+      // Issue new request on change if no request is pending
+      if (led_combined != led_combined_delayed && ~transfer_in_progress) begin
+        transfer_in_progress <= 1'b1;
+        m_ctrlport_req_wr <= 1'b1;
+        led_combined_delayed <= led_combined;
+      end
+
+      // Reset pending request
+      if (m_ctrlport_resp_ack) begin
+        transfer_in_progress <= 1'b0;
+      end
+    end
+  end
+
+  //----------------------------------------------------------
+  // Static ControlPort assignments
+  //----------------------------------------------------------
+
+  assign m_ctrlport_req_rd      = 0;
+  assign m_ctrlport_req_byte_en = 4'b0011;
+  assign m_ctrlport_req_addr    = LED_REGISTER_ADDRESS;
+  assign m_ctrlport_req_data    = {16'b0, led_combined_delayed};
+
+endmodule
+
+
+`default_nettype wire