fpga: x400: Add support for X410 motherboard FPGA
Co-authored-by: Andrew Moch <Andrew.Moch@ni.com> Co-authored-by: Daniel Jepson <daniel.jepson@ni.com> Co-authored-by: Javier Valenzuela <javier.valenzuela@ni.com> Co-authored-by: Joerg Hofrichter <joerg.hofrichter@ni.com> Co-authored-by: Kumaran Subramoniam <kumaran.subramoniam@ni.com> Co-authored-by: Max Köhler <max.koehler@ni.com> Co-authored-by: Michael Auchter <michael.auchter@ni.com> Co-authored-by: Paul Butler <paul.butler@ni.com> Co-authored-by: Wade Fife <wade.fife@ettus.com> Co-authored-by: Hector Rubio <hrubio@ni.com> Original-commit: 6d3765605262016a80f71e36357f749ea35cbe5a
This commit is contained in:
Wade Fife
committed by
Aaron Rossetto
Aaron Rossetto
co-authored by
Andrew Moch
Daniel Jepson
Javier Valenzuela
Joerg Hofrichter
Kumaran Subramoniam
Max Köhler
Michael Auchter
Paul Butler
Hector Rubio
Andrew Moch
Daniel Jepson
Javier Valenzuela
Joerg Hofrichter
Kumaran Subramoniam
Max Köhler
Michael Auchter
Paul Butler
Hector Rubio
parent
bfef20ea45
commit
61782b02d7
@@ -0,0 +1,38 @@
|
||||
#
|
||||
# Copyright 2021 Ettus Research, a National Instruments Brand
|
||||
#
|
||||
# SPDX-License-Identifier: LGPL-3.0-or-later
|
||||
#
|
||||
|
||||
include $(TOOLS_DIR)/make/viv_ip_builder.mak
|
||||
|
||||
IP_DAC_400M_ORIG_SRCS = $(addprefix $(IP_DIR)/dac_400m_bd/, \
|
||||
dac_400m_bd.tcl \
|
||||
)
|
||||
|
||||
IP_DAC_400M_HDL_SRCS = $(addprefix $(BASE_DIR)/x400/rf/400m/, \
|
||||
duc_400m_saturate.vhd \
|
||||
dac_gearbox_6x8.vhd \
|
||||
dac_gearbox_6x12.vhd \
|
||||
dac_gearbox_12x8.vhd \
|
||||
dac_gearbox_4x2.v \
|
||||
)
|
||||
|
||||
IP_DAC_400M_BDTCL_SRCS = $(addprefix $(IP_BUILD_DIR)/dac_400m_bd/, \
|
||||
dac_400m_bd.tcl \
|
||||
)
|
||||
|
||||
IP_DAC_400M_BD_SRCS = $(addprefix $(IP_BUILD_DIR)/dac_400m_bd/, \
|
||||
dac_400m_bd/dac_400m_bd.bd \
|
||||
)
|
||||
|
||||
BD_DAC_400M_BD_OUTS = $(addprefix $(IP_BUILD_DIR)/dac_400m_bd/, \
|
||||
dac_400m_bd.bd.out \
|
||||
dac_400m_bd/dac_400m_bd_ooc.xdc \
|
||||
dac_400m_bd/synth/dac_400m_bd.v \
|
||||
)
|
||||
|
||||
EMPTY_IP_SRCS =
|
||||
|
||||
$(IP_DAC_400M_BD_SRCS) $(BD_DAC_400M_BD_OUTS) $(IP_DAC_400M_BDTCL_SRCS): $(IP_DAC_400M_ORIG_SRCS)
|
||||
$(call BUILD_VIVADO_BDTCL,dac_400m_bd,$(ARCH),$(PART_ID),$(IP_DIR),$(IP_BUILD_DIR),$(EMPTY_IP_SRCS),$(IP_DAC_400M_HDL_SRCS),)
|
||||
@@ -0,0 +1,348 @@
|
||||
|
||||
################################################################
|
||||
# This is a generated script based on design: dac_400m_bd
|
||||
#
|
||||
# Though there are limitations about the generated script,
|
||||
# the main purpose of this utility is to make learning
|
||||
# IP Integrator Tcl commands easier.
|
||||
################################################################
|
||||
|
||||
namespace eval _tcl {
|
||||
proc get_script_folder {} {
|
||||
set script_path [file normalize [info script]]
|
||||
set script_folder [file dirname $script_path]
|
||||
return $script_folder
|
||||
}
|
||||
}
|
||||
variable script_folder
|
||||
set script_folder [_tcl::get_script_folder]
|
||||
|
||||
################################################################
|
||||
# Check if script is running in correct Vivado version.
|
||||
################################################################
|
||||
set scripts_vivado_version 2019.1
|
||||
set current_vivado_version [version -short]
|
||||
|
||||
if { [string first $scripts_vivado_version $current_vivado_version] == -1 } {
|
||||
puts ""
|
||||
catch {common::send_msg_id "BD_TCL-109" "ERROR" "This script was generated using Vivado <$scripts_vivado_version> and is being run in <$current_vivado_version> of Vivado. Please run the script in Vivado <$scripts_vivado_version> then open the design in Vivado <$current_vivado_version>. Upgrade the design by running \"Tools => Report => Report IP Status...\", then run write_bd_tcl to create an updated script."}
|
||||
|
||||
return 1
|
||||
}
|
||||
|
||||
################################################################
|
||||
# START
|
||||
################################################################
|
||||
|
||||
# To test this script, run the following commands from Vivado Tcl console:
|
||||
# source dac_400m_bd_script.tcl
|
||||
|
||||
|
||||
# The design that will be created by this Tcl script contains the following
|
||||
# module references:
|
||||
# dac_gearbox_4x2, dac_gearbox_6x8, duc_400m_saturate
|
||||
|
||||
# Please add the sources of those modules before sourcing this Tcl script.
|
||||
|
||||
# If there is no project opened, this script will create a
|
||||
# project, but make sure you do not have an existing project
|
||||
# <./myproj/project_1.xpr> in the current working folder.
|
||||
|
||||
set list_projs [get_projects -quiet]
|
||||
if { $list_projs eq "" } {
|
||||
create_project project_1 myproj -part xczu28dr-ffvg1517-1-e
|
||||
}
|
||||
|
||||
|
||||
# CHANGE DESIGN NAME HERE
|
||||
variable design_name
|
||||
set design_name dac_400m_bd
|
||||
|
||||
# If you do not already have an existing IP Integrator design open,
|
||||
# you can create a design using the following command:
|
||||
# create_bd_design $design_name
|
||||
|
||||
# Creating design if needed
|
||||
set errMsg ""
|
||||
set nRet 0
|
||||
|
||||
set cur_design [current_bd_design -quiet]
|
||||
set list_cells [get_bd_cells -quiet]
|
||||
|
||||
if { ${design_name} eq "" } {
|
||||
# USE CASES:
|
||||
# 1) Design_name not set
|
||||
|
||||
set errMsg "Please set the variable <design_name> to a non-empty value."
|
||||
set nRet 1
|
||||
|
||||
} elseif { ${cur_design} ne "" && ${list_cells} eq "" } {
|
||||
# USE CASES:
|
||||
# 2): Current design opened AND is empty AND names same.
|
||||
# 3): Current design opened AND is empty AND names diff; design_name NOT in project.
|
||||
# 4): Current design opened AND is empty AND names diff; design_name exists in project.
|
||||
|
||||
if { $cur_design ne $design_name } {
|
||||
common::send_msg_id "BD_TCL-001" "INFO" "Changing value of <design_name> from <$design_name> to <$cur_design> since current design is empty."
|
||||
set design_name [get_property NAME $cur_design]
|
||||
}
|
||||
common::send_msg_id "BD_TCL-002" "INFO" "Constructing design in IPI design <$cur_design>..."
|
||||
|
||||
} elseif { ${cur_design} ne "" && $list_cells ne "" && $cur_design eq $design_name } {
|
||||
# USE CASES:
|
||||
# 5) Current design opened AND has components AND same names.
|
||||
|
||||
set errMsg "Design <$design_name> already exists in your project, please set the variable <design_name> to another value."
|
||||
set nRet 1
|
||||
} elseif { [get_files -quiet ${design_name}.bd] ne "" } {
|
||||
# USE CASES:
|
||||
# 6) Current opened design, has components, but diff names, design_name exists in project.
|
||||
# 7) No opened design, design_name exists in project.
|
||||
|
||||
set errMsg "Design <$design_name> already exists in your project, please set the variable <design_name> to another value."
|
||||
set nRet 2
|
||||
|
||||
} else {
|
||||
# USE CASES:
|
||||
# 8) No opened design, design_name not in project.
|
||||
# 9) Current opened design, has components, but diff names, design_name not in project.
|
||||
|
||||
common::send_msg_id "BD_TCL-003" "INFO" "Currently there is no design <$design_name> in project, so creating one..."
|
||||
|
||||
create_bd_design $design_name
|
||||
|
||||
common::send_msg_id "BD_TCL-004" "INFO" "Making design <$design_name> as current_bd_design."
|
||||
current_bd_design $design_name
|
||||
|
||||
}
|
||||
|
||||
common::send_msg_id "BD_TCL-005" "INFO" "Currently the variable <design_name> is equal to \"$design_name\"."
|
||||
|
||||
if { $nRet != 0 } {
|
||||
catch {common::send_msg_id "BD_TCL-114" "ERROR" $errMsg}
|
||||
return $nRet
|
||||
}
|
||||
|
||||
set bCheckIPsPassed 1
|
||||
##################################################################
|
||||
# CHECK IPs
|
||||
##################################################################
|
||||
set bCheckIPs 1
|
||||
if { $bCheckIPs == 1 } {
|
||||
set list_check_ips "\
|
||||
xilinx.com:ip:fir_compiler:7.2\
|
||||
"
|
||||
|
||||
set list_ips_missing ""
|
||||
common::send_msg_id "BD_TCL-006" "INFO" "Checking if the following IPs exist in the project's IP catalog: $list_check_ips ."
|
||||
|
||||
foreach ip_vlnv $list_check_ips {
|
||||
set ip_obj [get_ipdefs -all $ip_vlnv]
|
||||
if { $ip_obj eq "" } {
|
||||
lappend list_ips_missing $ip_vlnv
|
||||
}
|
||||
}
|
||||
|
||||
if { $list_ips_missing ne "" } {
|
||||
catch {common::send_msg_id "BD_TCL-115" "ERROR" "The following IPs are not found in the IP Catalog:\n $list_ips_missing\n\nResolution: Please add the repository containing the IP(s) to the project." }
|
||||
set bCheckIPsPassed 0
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
##################################################################
|
||||
# CHECK Modules
|
||||
##################################################################
|
||||
set bCheckModules 1
|
||||
if { $bCheckModules == 1 } {
|
||||
set list_check_mods "\
|
||||
dac_gearbox_4x2\
|
||||
dac_gearbox_6x8\
|
||||
duc_400m_saturate\
|
||||
"
|
||||
|
||||
set list_mods_missing ""
|
||||
common::send_msg_id "BD_TCL-006" "INFO" "Checking if the following modules exist in the project's sources: $list_check_mods ."
|
||||
|
||||
foreach mod_vlnv $list_check_mods {
|
||||
if { [can_resolve_reference $mod_vlnv] == 0 } {
|
||||
lappend list_mods_missing $mod_vlnv
|
||||
}
|
||||
}
|
||||
|
||||
if { $list_mods_missing ne "" } {
|
||||
catch {common::send_msg_id "BD_TCL-115" "ERROR" "The following module(s) are not found in the project: $list_mods_missing" }
|
||||
common::send_msg_id "BD_TCL-008" "INFO" "Please add source files for the missing module(s) above."
|
||||
set bCheckIPsPassed 0
|
||||
}
|
||||
}
|
||||
|
||||
if { $bCheckIPsPassed != 1 } {
|
||||
common::send_msg_id "BD_TCL-1003" "WARNING" "Will not continue with creation of design due to the error(s) above."
|
||||
return 3
|
||||
}
|
||||
|
||||
##################################################################
|
||||
# DESIGN PROCs
|
||||
##################################################################
|
||||
|
||||
|
||||
|
||||
# Procedure to create entire design; Provide argument to make
|
||||
# procedure reusable. If parentCell is "", will use root.
|
||||
proc create_root_design { parentCell } {
|
||||
|
||||
variable script_folder
|
||||
variable design_name
|
||||
|
||||
if { $parentCell eq "" } {
|
||||
set parentCell [get_bd_cells /]
|
||||
}
|
||||
|
||||
# Get object for parentCell
|
||||
set parentObj [get_bd_cells $parentCell]
|
||||
if { $parentObj == "" } {
|
||||
catch {common::send_msg_id "BD_TCL-100" "ERROR" "Unable to find parent cell <$parentCell>!"}
|
||||
return
|
||||
}
|
||||
|
||||
# Make sure parentObj is hier blk
|
||||
set parentType [get_property TYPE $parentObj]
|
||||
if { $parentType ne "hier" } {
|
||||
catch {common::send_msg_id "BD_TCL-101" "ERROR" "Parent <$parentObj> has TYPE = <$parentType>. Expected to be <hier>."}
|
||||
return
|
||||
}
|
||||
|
||||
# Save current instance; Restore later
|
||||
set oldCurInst [current_bd_instance .]
|
||||
|
||||
# Set parent object as current
|
||||
current_bd_instance $parentObj
|
||||
|
||||
|
||||
# Create interface ports
|
||||
|
||||
# Create ports
|
||||
set dac_data_in_resetn_dclk [ create_bd_port -dir I -type rst dac_data_in_resetn_dclk ]
|
||||
set dac_data_in_resetn_dclk2x [ create_bd_port -dir I -type rst dac_data_in_resetn_dclk2x ]
|
||||
set dac_data_in_resetn_rclk [ create_bd_port -dir I -type rst dac_data_in_resetn_rclk ]
|
||||
set dac_data_in_tdata [ create_bd_port -dir I -from 127 -to 0 -type data dac_data_in_tdata ]
|
||||
set dac_data_in_tready [ create_bd_port -dir O -type data dac_data_in_tready ]
|
||||
set dac_data_in_tvalid [ create_bd_port -dir I -type data dac_data_in_tvalid ]
|
||||
set dac_data_out_tdata [ create_bd_port -dir O -from 255 -to 0 -type data dac_data_out_tdata ]
|
||||
set dac_data_out_tready [ create_bd_port -dir I -type data dac_data_out_tready ]
|
||||
set dac_data_out_tvalid [ create_bd_port -dir O -type data dac_data_out_tvalid ]
|
||||
set data_clk [ create_bd_port -dir I -type clk data_clk ]
|
||||
set_property -dict [ list \
|
||||
CONFIG.FREQ_HZ {122880000} \
|
||||
] $data_clk
|
||||
set data_clk_2x [ create_bd_port -dir I -type clk data_clk_2x ]
|
||||
set_property -dict [ list \
|
||||
CONFIG.ASSOCIATED_RESET {dac_data_in_resetn_dclk2x} \
|
||||
CONFIG.FREQ_HZ {245760000} \
|
||||
] $data_clk_2x
|
||||
set rfdc_clk [ create_bd_port -dir I -type clk rfdc_clk ]
|
||||
set_property -dict [ list \
|
||||
CONFIG.FREQ_HZ {184320000} \
|
||||
] $rfdc_clk
|
||||
|
||||
# Create instance: dac_gearbox_4x2_0, and set properties
|
||||
set block_name dac_gearbox_4x2
|
||||
set block_cell_name dac_gearbox_4x2_0
|
||||
if { [catch {set dac_gearbox_4x2_0 [create_bd_cell -type module -reference $block_name $block_cell_name] } errmsg] } {
|
||||
catch {common::send_msg_id "BD_TCL-105" "ERROR" "Unable to add referenced block <$block_name>. Please add the files for ${block_name}'s definition into the project."}
|
||||
return 1
|
||||
} elseif { $dac_gearbox_4x2_0 eq "" } {
|
||||
catch {common::send_msg_id "BD_TCL-106" "ERROR" "Unable to referenced block <$block_name>. Please add the files for ${block_name}'s definition into the project."}
|
||||
return 1
|
||||
}
|
||||
|
||||
# Create instance: dac_gearbox_6x8_0, and set properties
|
||||
set block_name dac_gearbox_6x8
|
||||
set block_cell_name dac_gearbox_6x8_0
|
||||
if { [catch {set dac_gearbox_6x8_0 [create_bd_cell -type module -reference $block_name $block_cell_name] } errmsg] } {
|
||||
catch {common::send_msg_id "BD_TCL-105" "ERROR" "Unable to add referenced block <$block_name>. Please add the files for ${block_name}'s definition into the project."}
|
||||
return 1
|
||||
} elseif { $dac_gearbox_6x8_0 eq "" } {
|
||||
catch {common::send_msg_id "BD_TCL-106" "ERROR" "Unable to referenced block <$block_name>. Please add the files for ${block_name}'s definition into the project."}
|
||||
return 1
|
||||
}
|
||||
|
||||
# Create instance: dac_interpolator, and set properties
|
||||
set dac_interpolator [ create_bd_cell -type ip -vlnv xilinx.com:ip:fir_compiler:7.2 dac_interpolator ]
|
||||
set_property -dict [ list \
|
||||
CONFIG.Clock_Frequency {245.76} \
|
||||
CONFIG.CoefficientVector {-7,0,24,37,0,-78,-107,0,189,244,0,-389,-484,0,723,873,0,-1245,-1473,0,2029,2364,0,-3177,-3668,0,4862,5592,0,-7418,-8579,0,11675,13820,0,-20461,-26115,0,53699,108144,131069,108144,53699,0,-26115,-20461,0,13820,11675,0,-8579,-7418,0,5592,4862,0,-3668,-3177,0,2364,2029,0,-1473,-1245,0,873,723,0,-484,-389,0,244,189,0,-107,-78,0,37,24,0,-7} \
|
||||
CONFIG.Coefficient_Fractional_Bits {0} \
|
||||
CONFIG.Coefficient_Sets {1} \
|
||||
CONFIG.Coefficient_Sign {Signed} \
|
||||
CONFIG.Coefficient_Structure {Inferred} \
|
||||
CONFIG.Coefficient_Width {18} \
|
||||
CONFIG.ColumnConfig {27} \
|
||||
CONFIG.Decimation_Rate {1} \
|
||||
CONFIG.Filter_Architecture {Systolic_Multiply_Accumulate} \
|
||||
CONFIG.Filter_Type {Interpolation} \
|
||||
CONFIG.Has_ARESETn {true} \
|
||||
CONFIG.Interpolation_Rate {3} \
|
||||
CONFIG.Number_Channels {1} \
|
||||
CONFIG.Number_Paths {2} \
|
||||
CONFIG.Output_Rounding_Mode {Convergent_Rounding_to_Even} \
|
||||
CONFIG.Output_Width {18} \
|
||||
CONFIG.Quantization {Integer_Coefficients} \
|
||||
CONFIG.RateSpecification {Frequency_Specification} \
|
||||
CONFIG.Reset_Data_Vector {false} \
|
||||
CONFIG.S_DATA_Has_FIFO {false} \
|
||||
CONFIG.Sample_Frequency {491.52} \
|
||||
CONFIG.Zero_Pack_Factor {1} \
|
||||
] $dac_interpolator
|
||||
|
||||
# Create instance: duc_400m_saturate_0, and set properties
|
||||
set block_name duc_400m_saturate
|
||||
set block_cell_name duc_400m_saturate_0
|
||||
if { [catch {set duc_400m_saturate_0 [create_bd_cell -type module -reference $block_name $block_cell_name] } errmsg] } {
|
||||
catch {common::send_msg_id "BD_TCL-105" "ERROR" "Unable to add referenced block <$block_name>. Please add the files for ${block_name}'s definition into the project."}
|
||||
return 1
|
||||
} elseif { $duc_400m_saturate_0 eq "" } {
|
||||
catch {common::send_msg_id "BD_TCL-106" "ERROR" "Unable to referenced block <$block_name>. Please add the files for ${block_name}'s definition into the project."}
|
||||
return 1
|
||||
}
|
||||
|
||||
# Create port connections
|
||||
connect_bd_net -net dac_data_in_1 [get_bd_ports dac_data_in_tdata] [get_bd_pins dac_gearbox_4x2_0/data_in_1x]
|
||||
connect_bd_net -net dac_data_in_resetn_dclk_1 [get_bd_ports dac_data_in_resetn_dclk] [get_bd_pins dac_gearbox_4x2_0/reset_n_1x] [get_bd_pins dac_gearbox_6x8_0/ac1Reset_n]
|
||||
connect_bd_net -net dac_data_in_resetn_rclk_1 [get_bd_ports dac_data_in_resetn_rclk] [get_bd_pins dac_gearbox_6x8_0/arReset_n]
|
||||
connect_bd_net -net dac_data_out_tready_1 [get_bd_ports dac_data_out_tready] [get_bd_pins dac_gearbox_6x8_0/rReadyForOutput]
|
||||
connect_bd_net -net dac_data_valid_in_1 [get_bd_ports dac_data_in_tvalid] [get_bd_pins dac_gearbox_4x2_0/valid_in_1x]
|
||||
connect_bd_net -net dac_gearbox_4x2_0_data_out_2x [get_bd_pins dac_gearbox_4x2_0/data_out_2x] [get_bd_pins dac_interpolator/s_axis_data_tdata]
|
||||
connect_bd_net -net dac_gearbox_4x2_0_ready_out_1x [get_bd_ports dac_data_in_tready] [get_bd_pins dac_gearbox_4x2_0/ready_out_1x]
|
||||
connect_bd_net -net dac_gearbox_4x2_0_valid_out_2x [get_bd_pins dac_gearbox_4x2_0/valid_out_2x] [get_bd_pins dac_interpolator/s_axis_data_tvalid]
|
||||
connect_bd_net -net dac_gearbox_6x8_0_rDataOut [get_bd_ports dac_data_out_tdata] [get_bd_pins dac_gearbox_6x8_0/rDataOut]
|
||||
connect_bd_net -net dac_gearbox_6x8_0_rDataValidOut [get_bd_ports dac_data_out_tvalid] [get_bd_pins dac_gearbox_6x8_0/rDataValidOut]
|
||||
connect_bd_net -net dac_interpolator_m_axis_data_tdata [get_bd_pins dac_interpolator/m_axis_data_tdata] [get_bd_pins duc_400m_saturate_0/cDataIn]
|
||||
connect_bd_net -net dac_interpolator_m_axis_data_tvalid [get_bd_pins dac_interpolator/m_axis_data_tvalid] [get_bd_pins duc_400m_saturate_0/cDataValidIn]
|
||||
connect_bd_net -net data_clk_1 [get_bd_ports data_clk] [get_bd_pins dac_gearbox_4x2_0/clk1x] [get_bd_pins dac_gearbox_6x8_0/Clk1x]
|
||||
connect_bd_net -net data_clk_2x_1 [get_bd_ports data_clk_2x] [get_bd_pins dac_gearbox_4x2_0/clk2x] [get_bd_pins dac_gearbox_6x8_0/Clk2x] [get_bd_pins dac_interpolator/aclk] [get_bd_pins duc_400m_saturate_0/Clk]
|
||||
connect_bd_net -net data_resetn_dclk2x_1 [get_bd_ports dac_data_in_resetn_dclk2x] [get_bd_pins dac_gearbox_6x8_0/ac2Reset_n] [get_bd_pins dac_interpolator/aresetn]
|
||||
connect_bd_net -net duc_400m_saturate_0_cDataOut [get_bd_pins dac_gearbox_6x8_0/c2DataIn] [get_bd_pins duc_400m_saturate_0/cDataOut]
|
||||
connect_bd_net -net duc_400m_saturate_0_cDataValidOut [get_bd_pins dac_gearbox_6x8_0/c2DataValidIn] [get_bd_pins duc_400m_saturate_0/cDataValidOut]
|
||||
connect_bd_net -net rfdc_clk_1 [get_bd_ports rfdc_clk] [get_bd_pins dac_gearbox_6x8_0/RfClk]
|
||||
|
||||
# Create address segments
|
||||
|
||||
|
||||
# Restore current instance
|
||||
current_bd_instance $oldCurInst
|
||||
|
||||
validate_bd_design
|
||||
save_bd_design
|
||||
}
|
||||
# End of create_root_design()
|
||||
|
||||
|
||||
##################################################################
|
||||
# MAIN FLOW
|
||||
##################################################################
|
||||
|
||||
create_root_design ""
|
||||
|
||||
|
||||
@@ -0,0 +1,9 @@
|
||||
set script_loc [file normalize [info script]]
|
||||
set script_dir [file dirname $script_loc]
|
||||
|
||||
read_verilog -library work $script_dir/../../rf/400m/dac_gearbox_4x2.v
|
||||
read_vhdl -library work $script_dir/../../rf/common/PkgRf.vhd
|
||||
read_vhdl -library work $script_dir/../../rf/400m/dac_gearbox_6x8.vhd
|
||||
read_vhdl -library work $script_dir/../../rf/400m/dac_gearbox_6x12.vhd
|
||||
read_vhdl -library work $script_dir/../../rf/400m/dac_gearbox_12x8.vhd
|
||||
read_vhdl -library work $script_dir/../../rf/400m/duc_400m_saturate.vhd
|
||||
@@ -0,0 +1,44 @@
|
||||
------------------------------------------------------------------------------------------
|
||||
--
|
||||
-- File: dac_400m_bd.vhd
|
||||
-- Author: niBlockDesign::niBdExportStub
|
||||
-- Original Project: HwBuildTools
|
||||
-- Date: 22 April 2020
|
||||
--
|
||||
------------------------------------------------------------------------------------------
|
||||
-- (c) Copyright National Instruments Corporation
|
||||
-- All Rights Reserved
|
||||
-- National Instruments Internal Information
|
||||
------------------------------------------------------------------------------------------
|
||||
--
|
||||
-- Purpose: This is an automatically generated stub file to match the entity
|
||||
-- declaration for 'dac_400m_bd'. This file was created using niBdExportStub
|
||||
-- Do not modify this file directly!
|
||||
--
|
||||
------------------------------------------------------------------------------------------
|
||||
|
||||
library ieee;
|
||||
use ieee.std_logic_1164.all;
|
||||
library unisim;
|
||||
use unisim.vcomponents.all;
|
||||
|
||||
entity dac_400m_bd is
|
||||
port (
|
||||
dac_data_in_resetn_dclk : in STD_LOGIC;
|
||||
dac_data_in_resetn_dclk2x : in STD_LOGIC;
|
||||
dac_data_in_resetn_rclk : in STD_LOGIC;
|
||||
dac_data_in_tdata : in STD_LOGIC_VECTOR ( 127 downto 0 );
|
||||
dac_data_in_tready : out STD_LOGIC;
|
||||
dac_data_in_tvalid : in STD_LOGIC;
|
||||
dac_data_out_tdata : out STD_LOGIC_VECTOR ( 255 downto 0 );
|
||||
dac_data_out_tready : in STD_LOGIC;
|
||||
dac_data_out_tvalid : out STD_LOGIC;
|
||||
data_clk : in STD_LOGIC;
|
||||
data_clk_2x : in STD_LOGIC;
|
||||
rfdc_clk : in STD_LOGIC
|
||||
);
|
||||
end entity dac_400m_bd;
|
||||
|
||||
architecture stub of dac_400m_bd is
|
||||
begin
|
||||
end architecture stub;
|
||||
Reference in New Issue
Block a user