diff --git a/README.md b/README.md
index 41257b4..6eb75b9 100644
--- a/README.md
+++ b/README.md
@@ -2,6 +2,8 @@
 
 Glorytun is a small, simple and secure VPN over [mud](https://github.com/angt/mud).
 
+Please visit the [wiki](https://github.com/angt/glorytun/wiki) for how-to guides, tutorials, etc.
+
 ## Compatibility
 
 Glorytun only depends on [libsodium](https://github.com/jedisct1/libsodium) version >= 1.0.4.
@@ -50,80 +52,6 @@ Glorytun is strongly secure by default and protects against replay attacks,
 the clock between the client and the server must be synchronized.
 By default, an offset of 10min is accepted.
 
-## Build and Install
-
-You will need `git`, `make`, `gcc` and `libsodium`:
-
-    $ sudo apt install git make gcc libsodium-dev    # debian based
-    $ sudo yum install git make gcc libsodium-devel  # redhat based
-
-To build and install the latest release from github:
-
-    $ git clone https://github.com/angt/glorytun --recursive
-    $ cd glorytun
-    $ sudo make install
-
-This will install the binary in `/usr/bin` by default.
-
-The more classical autotools suite is also available.
-
-## Usage
-
-Just run `glorytun` with no arguments to view the list of available commands:
-
-    $ glorytun
-    available commands:
-
-      show     show tunnel info
-      bench    start a crypto bench
-      bind     start a new tunnel
-      set      change tunnel properties
-      keygen   generate a new secret key
-      path     manage paths
-      version  show version
-
-Use the keyword `help` after a command to show its usage.
-
-## Mini HowTo
-
-Glorytun does not touch the configuration of its network interface (except for the MTU),
-It is up to the user to do it according to the tools available
-on his system (systemd-networkd, netifd, ...).
-This also allows a wide variety of configurations.
-
-To start a server:
-
-    # (umask 066; glorytun keygen > my_secret_key)
-    # glorytun bind 0.0.0.0 keyfile my_secret_key &
-
-You should now have an unconfigured network interface (let's say `tun0`).
-For example, the simplest setup with `ifconfig`:
-
-    # ifconfig tun0 10.0.1.1 pointopoint 10.0.1.2 up
-
-To check if the server is running, simply call `glorytun show`.
-It will show you all of the running tunnels.
-
-To start a new client, you need to get the secret key generated for the server.
-Then simply call:
-
-    # glorytun bind 0.0.0.0 to SERVER_IP keyfile my_secret_key &
-    # ifconfig tun0 10.0.1.2 pointopoint 10.0.1.1 up
-
-Now you have to setup your path, let's say you have an ADSL link that can do 1Mbit upload and 20Mbit download then call:
-
-    # glorytun path up LOCAL_IPADDR rate tx 1mbit rx 20mbit
-
-Again, to check if your path is working, you can watch its status with `glorytun path`.
-You should now be able to ping your server with `ping 10.0.1.1`.
-
-If you use systemd-networkd, you can easily setup your tunnels with the helper program `glorytun-setup`.
-
-## Thanks
-
- * @jedisct1 for all his help and the code for MacOS/BSD.
- * The team OTB (@bessa, @gregdel, @pouulet, @sduponch and @simon) for all tests and discussions.
- * OVH to support this soft :)
 
 ---