Wade Fife
81bb2ae28f
This adds the ability to do IP generation and FPGA builds using the --jobs (-j) option with Make. For example, rather than generating each IP one after another, you can generate up to N at a time using N Vivado instances. This greatly reduces the IP generation time. Similarly, parallel jobs can be used to easily build different FPGA variants simultaneously. Because FPGA builds can consume a lot of memory, care must be taken to ensure that the number of jobs is not too high for the amount of memory available. New IP make targets were added for each USRP so that IP can be built separately from the FPGA. The IP targets are now a dependency on each FPGA target. For example, you can generate the IP for X310 using 4 parallel jobs using the following command: make -j4 X310_IP Or, build two X310 bitstreams simultaneously: make -j2 X310_XG X310_HG Original-commit: 4b03e237a96ee277eefff257d65b08708c38662c
168 lines
5.2 KiB
PHP
168 lines
5.2 KiB
PHP
#
|
|
# Copyright 2008-2019 Ettus Research, a National Instruments Brand
|
|
#
|
|
|
|
##################################################
|
|
# Project Setup
|
|
##################################################
|
|
# TOP_MODULE = <Input arg>
|
|
# NAME = <Input arg>
|
|
# PART_ID = <Input arg>
|
|
# ARCH = <Input arg>
|
|
|
|
##################################################
|
|
# Include other makefiles
|
|
##################################################
|
|
|
|
BASE_DIR = $(abspath ..)
|
|
IP_DIR = $(abspath ./ip)
|
|
include $(BASE_DIR)/../tools/make/viv_design_builder.mak
|
|
|
|
include $(IP_DIR)/Makefile.inc
|
|
include coregen_dsp/Makefile.srcs
|
|
include $(LIB_DIR)/ip/Makefile.inc
|
|
include $(LIB_DIR)/hls/Makefile.inc
|
|
include $(LIB_DIR)/control/Makefile.srcs
|
|
include $(LIB_DIR)/fifo/Makefile.srcs
|
|
include $(LIB_DIR)/simple_gemac/Makefile.srcs
|
|
include $(LIB_DIR)/axi/Makefile.srcs
|
|
include $(LIB_DIR)/timing/Makefile.srcs
|
|
include $(LIB_DIR)/packet_proc/Makefile.srcs
|
|
include $(LIB_DIR)/xge/Makefile.srcs
|
|
include $(LIB_DIR)/xge_interface/Makefile.srcs
|
|
include $(LIB_DIR)/dsp/Makefile.srcs
|
|
include $(LIB_DIR)/axi/Makefile.srcs
|
|
include $(LIB_DIR)/white_rabbit/wr_cores_v4_2/Makefile.srcs
|
|
include $(LIB_DIR)/rfnoc/Makefile.srcs
|
|
include $(BASE_DIR)/n3xx/dboards/rh/Makefile.srcs
|
|
include $(BASE_DIR)/n3xx/dboards/mg/Makefile.srcs
|
|
include $(BASE_DIR)/n3xx/dboards/common/Makefile.srcs
|
|
# For sake of convenience, we include the Makefile.srcs for DRAM FIFO, DDC, and
|
|
# DUC, Replay, and of course the radio. Any other block needs to use the
|
|
# RFNOC_OOT_MAKEFILE_SRCS variable (see below).
|
|
include $(LIB_DIR)/rfnoc/blocks/rfnoc_block_axi_ram_fifo/Makefile.srcs
|
|
include $(LIB_DIR)/rfnoc/blocks/rfnoc_block_radio/Makefile.srcs
|
|
include $(LIB_DIR)/rfnoc/blocks/rfnoc_block_ddc/Makefile.srcs
|
|
include $(LIB_DIR)/rfnoc/blocks/rfnoc_block_duc/Makefile.srcs
|
|
include $(LIB_DIR)/rfnoc/blocks/rfnoc_block_replay/Makefile.srcs
|
|
# If out-of-tree modules want to be compiled into this image, then they need to
|
|
# pass in the RFNOC_OOT_MAKEFILE_SRCS as a list of Makefile.srcs files.
|
|
# Those files need to amend the RFNOC_OOT_SRCS variable with a list of actual
|
|
# source files.
|
|
include $(RFNOC_OOT_MAKEFILE_SRCS)
|
|
|
|
IMAGE_CORE ?= $(DEFAULT_RFNOC_IMAGE_CORE_FILE)
|
|
EDGE_FILE ?= $(DEFAULT_EDGE_FILE)
|
|
|
|
##################################################
|
|
# Sources
|
|
##################################################
|
|
TOP_SRCS = \
|
|
n3xx_core.v \
|
|
n3xx_mgt_channel_wrapper.v \
|
|
n3xx_mgt_wrapper.v \
|
|
n3xx_mgt_io_core.v \
|
|
n3xx_clocking.v \
|
|
n3xx_db_fe_core.v \
|
|
WrapBufg.vhd \
|
|
$(IMAGE_CORE)
|
|
|
|
MB_CLOCKS_XDC = $(abspath mb_clocks.xdc)
|
|
|
|
MB_XDC = \
|
|
mb_timing.xdc \
|
|
mb_pins.xdc
|
|
|
|
ifdef BUILD_WR
|
|
MB_XDC += $(abspath n3xx_wr.xdc)
|
|
TOP_SRCS += \
|
|
n3xx_wr_top.vhd \
|
|
n3xx_serial_dac.vhd \
|
|
n3xx_serial_dac_arb.vhd
|
|
endif
|
|
|
|
ifdef BUILD_10G
|
|
MB_XDC += $(abspath n310_10ge.xdc)
|
|
endif
|
|
|
|
ifdef BUILD_1G
|
|
MB_XDC += $(abspath n310_1ge.xdc)
|
|
endif
|
|
|
|
ifdef BUILD_AURORA
|
|
MB_XDC += $(abspath n310_aurora.xdc)
|
|
endif
|
|
|
|
ifndef NO_DRAM_FIFOS
|
|
DRAM_SRCS = $(IP_DRAM_XCI_SRCS) $(abspath n310_dram.xdc)
|
|
else
|
|
DRAM_SRCS =
|
|
endif
|
|
|
|
ifdef N300
|
|
DB_CLOCKS_XDC =
|
|
DB_SRCS = $(MAGNESIUM_DB_TIMING_XDC) \
|
|
$(MAGNESIUM_DB0_XDC) \
|
|
$(MAGNESIUM_TOP_SRCS) $(MAGNESIUM_DB_SRCS)
|
|
endif
|
|
|
|
ifdef N310
|
|
DB_CLOCKS_XDC =
|
|
DB_SRCS = $(MAGNESIUM_DB_TIMING_XDC) \
|
|
$(MAGNESIUM_DB0_XDC) $(MAGNESIUM_DB1_XDC) \
|
|
$(MAGNESIUM_TOP_SRCS) $(MAGNESIUM_DB_SRCS)
|
|
endif
|
|
|
|
ifdef N320
|
|
DB_CLOCKS_XDC = $(RHODIUM_DB_CLOCKS_XDC)
|
|
DB_SRCS = $(RHODIUM_DB_XDC) \
|
|
$(RHODIUM_TOP_SRCS) $(RHODIUM_DB_SRCS)
|
|
endif
|
|
|
|
DB_SRCS += $(DB_COMMON_SRCS)
|
|
|
|
# The XDC files must be read in a specific order, motherboard first and then daughterboard,
|
|
# and the clocking XDC files must be before other XDC files.
|
|
# Outside of that, all the other sources can be read in any order desired.
|
|
DESIGN_SRCS = $(MB_CLOCKS_XDC) $(DB_CLOCKS_XDC) $(abspath $(MB_XDC)) $(DB_SRCS) \
|
|
$(abspath $(TOP_SRCS)) $(AXI_SRCS) $(FIFO_SRCS) \
|
|
$(CONTROL_LIB_SRCS) $(SDR_LIB_SRCS) $(SERDES_SRCS) \
|
|
$(SIMPLE_GEMAC_SRCS) $(TIMING_SRCS) $(COREGEN_DSP_SRCS) \
|
|
$(UDP_SRCS) $(EXTRAM_SRCS) $(WISHBONE_SRCS) \
|
|
$(XGE_SRCS) $(XGE_INTERFACE_SRCS) $(AURORA_PHY_SRCS) \
|
|
$(TEN_GIGE_PHY_SRCS) $(ONE_GIGE_PHY_SRCS) \
|
|
$(PACKET_PROC_SRCS) $(DSP_SRCS) $(DRAM_SRCS) \
|
|
$(RADIO_SRCS) $(CAP_GEN_GENERIC_SRCS) $(IP_XCI_SRCS) $(BD_SRCS) \
|
|
$(RFNOC_SRCS) $(RFNOC_OOT_SRCS) $(LIB_IP_XCI_SRCS) $(LIB_HLS_IP_SRCS) \
|
|
$(WHITE_RABBIT_SRCS) \
|
|
$(RFNOC_FRAMEWORK_SRCS) \
|
|
$(RFNOC_BLOCK_AXI_RAM_FIFO_SRCS) \
|
|
$(RFNOC_BLOCK_DUC_SRCS) $(RFNOC_BLOCK_DDC_SRCS) \
|
|
$(RFNOC_BLOCK_RADIO_SRCS) \
|
|
$(RFNOC_BLOCK_REPLAY_SRCS)
|
|
|
|
EDGE_TBL_DEF="RFNOC_EDGE_TBL_FILE=$(call RESOLVE_PATH,$(EDGE_FILE))"
|
|
IMAGE_CORE_DEF="RFNOC_IMAGE_CORE_HDR=$(call RESOLVE_PATH,$(IMAGE_CORE:.v=.vh))"
|
|
|
|
##################################################
|
|
# Dependency Targets
|
|
##################################################
|
|
.SECONDEXPANSION:
|
|
|
|
VERILOG_DEFS=$(EXTRA_DEFS) $(CUSTOM_DEFS) $(GIT_HASH_VERILOG_DEF) $(EDGE_TBL_DEF) $(IMAGE_CORE_DEF)
|
|
|
|
# DESIGN_SRCS and VERILOG_DEFS must be defined
|
|
bin: .prereqs $$(DESIGN_SRCS)
|
|
$(call BUILD_VIVADO_DESIGN,$(abspath ./build_n3xx.tcl),$(TOP_MODULE),$(ARCH),$(PART_ID))
|
|
|
|
synth: .prereqs $$(DESIGN_SRCS)
|
|
$(call BUILD_VIVADO_DESIGN,$(TOOLS_DIR)/scripts/viv_synth.tcl,$(TOP_MODULE),$(ARCH),$(PART_ID))
|
|
|
|
rtl: .prereqs $$(DESIGN_SRCS)
|
|
$(call CHECK_VIVADO_DESIGN,$(TOOLS_DIR)/scripts/viv_check_syntax.tcl,$(TOP_MODULE),$(ARCH),$(PART_ID))
|
|
|
|
viv_ip: .prereqs $$(DESIGN_SRCS)
|
|
@echo "IP build for $(NAME) DONE . . ."
|
|
|
|
.PHONY: bin rtl
|