Joerg Hofrichter
e01ce08634
... to support custom image core name, example:
rfnoc_image_builder -y n310_rfnoc_image_core.yml -n my_custom_name
The device tree source files were renamed to match the target
name used in the Makefile.
example:
old: dts/usrp_n310_fpga_hg.dts
new: dts/N310_HG.dts
The source file is used to compile the final .dts file in the BUILD_DIR.
example: build-my_custom_name/N310_HG.dts
The final .dts file is copied to the BUILD_OUTPUT_DIR as part of the
post build steps and renamed to the custom image core name.
example: build/my_custom_name.dts
This completes the change that was introduced with commit 2afc66f132.
Original-commit: d40db57f2e03c322ac6b0001e0a59d4a14a5a3b9
185 lines
7.2 KiB
Makefile
185 lines
7.2 KiB
Makefile
#
|
|
# Copyright 2022 Ettus Research, a National Instruments Brand
|
|
#
|
|
# SPDX-License-Identifier: LGPL-3.0-or-later
|
|
#
|
|
|
|
# NOTE: All comments prefixed with a "##" will be displayed as a part of the "make help" target
|
|
##-------------------
|
|
##USRP X4xx FPGA Help
|
|
##-------------------
|
|
##Usage:
|
|
## rfnoc_image_builder -y <image core file>
|
|
##
|
|
## NOTE: For building X4x0 bitfiles, do not run make directly! Instead, use
|
|
## rfnoc_image_builder. It will create all intermediate files, set up a Vivado
|
|
## environment, and run Vivado to build a bitfile.
|
|
##
|
|
## There exist some special make targets which can be called directly like this:
|
|
##
|
|
## make <Targets> <Options>
|
|
##
|
|
##Output:
|
|
## $(BUILD_OUTPUT_DIR)/usrp_<product>_fpga_<image_type>.bit: Configuration bitstream with header
|
|
## $(BUILD_OUTPUT_DIR)/usrp_<product>_fpga_<image_type>.dts: Device tree source file
|
|
## $(BUILD_OUTPUT_DIR)/usrp_<product>_fpga_<image_type>.rpt: Build report (includes utilization and timing summary)
|
|
|
|
# Base output directory for all builds.
|
|
BUILD_BASE_DIR ?= .
|
|
# Base directory for the build outputs.
|
|
BUILD_OUTPUT_DIR ?= $(BUILD_BASE_DIR)/build
|
|
|
|
# Sane defaults for IP builds
|
|
X410_IP: DEFS += QSFP0_0=2 RF_BW=100
|
|
X440_IP: DEFS += QSFP0_0=2 RF_BW=400
|
|
|
|
# DRAM IP inclusion. Set to 1 to include DRAM memory controller in design, 0 to
|
|
# exclude it. Note that some targets exclude it regardless of this setting.
|
|
DRAM ?= 1
|
|
|
|
DEFS += $(OPTIONS)
|
|
|
|
# Initialize a build seed. This can be changed to randomly affect build results.
|
|
BUILD_SEED ?= 0
|
|
DEFS += BUILD_SEED=$(BUILD_SEED)
|
|
|
|
# Default value for incremental Vivado build is disabled.
|
|
INCR_BUILD ?= 0
|
|
|
|
# Option to stop after RTL elaboration. Use this flag as a synthesis check.
|
|
ifndef TARGET
|
|
ifeq ($(CHECK), 1)
|
|
TARGET = rtl
|
|
else ifeq ($(SYNTH), 1)
|
|
TARGET = synth
|
|
else ifeq ($(IP_ONLY), 1)
|
|
TARGET = viv_ip
|
|
else ifeq ($(SECURE_CORE), 1)
|
|
TARGET = secure_core
|
|
TOP = secure_image_core
|
|
else
|
|
TARGET = bin
|
|
endif
|
|
endif
|
|
TOP ?= x4xx
|
|
|
|
# vivado_build($1=Device (X410 or X440), $2=Definitions)
|
|
vivado_build = make -f Makefile.x4xx.inc $(TARGET) NAME=$@ ARCH=$(XIL_ARCH_$1) PART_ID=$(XIL_PART_ID_$1) EXTRA_DEFS="$2" TOP_MODULE=$(TOP) $2 INCR_BUILD=$(INCR_BUILD)
|
|
vivado_ip = make -f Makefile.x4xx.inc viv_ip NAME=$@ ARCH=$(XIL_ARCH_$1) PART_ID=$(XIL_PART_ID_$1) EXTRA_DEFS="$2" TOP_MODULE=$(TOP) $2
|
|
|
|
# vivado_build($1=Device)
|
|
ifeq ($(TARGET),bin)
|
|
post_build = @\
|
|
mkdir -p $(BUILD_OUTPUT_DIR); \
|
|
echo "Exporting bitstream file..."; \
|
|
cp $(BUILD_DIR)/x4xx.bit $(BUILD_OUTPUT_DIR)/$(IMAGE_CORE_NAME).bit; \
|
|
echo "Exporting build report..."; \
|
|
cp $(BUILD_DIR)/build.rpt $(BUILD_OUTPUT_DIR)/$(IMAGE_CORE_NAME).rpt; \
|
|
echo "Exporting devicetree file..."; \
|
|
cp $(BUILD_DIR)/$(1).dts $(BUILD_OUTPUT_DIR)/$(IMAGE_CORE_NAME).dts; \
|
|
echo "Build DONE ... $(IMAGE_CORE_NAME)";
|
|
else
|
|
post_build = @echo "Skipping bitfile export."
|
|
endif
|
|
|
|
##
|
|
##Available Targets:
|
|
##
|
|
##Reminder: Targets are built by calling
|
|
##
|
|
## $ rfnoc_image_builder -y <image core file.yml>
|
|
##
|
|
##The following default image core files are provided:
|
|
##
|
|
##-----------------------------------|-----------|----|-----------------|-----------------|------------
|
|
##Image core name | Bandwidth | Ch | QSFP0 | QSFP1 | DRAM
|
|
##-----------------------------------|-----------|----|-----------------|-----------------|------------
|
|
##x410_CG_400_rfnoc_image_core.yml | 400 MHz | 4 | 100 GbE | 100 GbE | Unused
|
|
##x410_UC_200_rfnoc_image_core.yml | 200 MHz | 4 | Unused | 100 GbE | 64b x 4 Ch
|
|
##x410_X4_200_rfnoc_image_core.yml | 200 MHz | 4 | 4 x 10 GbE | Unused | 64b x 4 Ch
|
|
##x410_XG_200_rfnoc_image_core.yml | 200 MHz | 4 | 10 GbE (Lane 0) | 10 GbE (Lane 0) | 64b x 4 Ch
|
|
##x440_CG_400_rfnoc_image_core.yml | 400 MHz | 8 | 100 GbE | 100 GbE | Unused
|
|
##x440_CG_1600_rfnoc_image_core.yml | 1.6 GHz | 2 | 100 GbE | 100 GbE | Unused
|
|
##x440_X4_200_rfnoc_image_core.yml | 200 MHz | 8 | 4 x 10 GbE | Unused | Unused
|
|
##x440_X4_400_rfnoc_image_core.yml | 400 MHz | 8 | 4 x 10 GbE | Unused | 128b x 8 Ch
|
|
##x440_X4_1600_rfnoc_image_core.yml | 1.6 GHz | 2 | 4 x 10 GbE | Unused | 512b x 2 Ch
|
|
##
|
|
##Of course, a custom YAML file may be used.
|
|
##
|
|
check-variables:
|
|
ifndef IMAGE_CORE_NAME
|
|
$(error IMAGE_CORE_NAME is not set! Use rfnoc_image_builder to create valid make commands)
|
|
endif
|
|
ifndef BUILD_DIR
|
|
$(error BUILD_DIR is not set! Use rfnoc_image_builder to create valid make commands)
|
|
endif
|
|
|
|
X410: check-variables X410_IP $(BUILD_DIR)/X410.dts
|
|
$(call vivado_build,X410,$(DEFS) X410=1)
|
|
$(call post_build,X410)
|
|
X440: check-variables X440_IP $(BUILD_DIR)/X440.dts
|
|
$(call vivado_build,X440,$(DEFS) X440=1)
|
|
$(call post_build,X440)
|
|
|
|
|
|
##
|
|
##Other Make Targets (these should be called directly)
|
|
##----------------------------------------------------
|
|
|
|
.DEFAULT_GOAL := all
|
|
|
|
X410_IP: ##Build X410 IP only. Use the -j option to build multiple IP blocks simultaneously.
|
|
+$(call vivado_ip,X410,$(DEFS) X410=1)
|
|
|
|
X440_IP: ##Build X440 IP only. Use the -j option to build multiple IP blocks simultaneously.
|
|
+$(call vivado_ip,X440,$(DEFS) X440=1)
|
|
|
|
dts/x410-version-info.dtsi: regmap/x410/versioning_regs_regmap_utils.vh
|
|
tools/parse_versions_for_dts.py \
|
|
--input $< --output $@ \
|
|
--components fpga,cpld_ifc,db_gpio_ifc,rf_core_100m,rf_core_400m
|
|
|
|
dts/x440-version-info.dtsi: regmap/x440/versioning_regs_regmap_utils.vh
|
|
tools/parse_versions_for_dts.py \
|
|
--input $< --output $@ \
|
|
--components fpga,cpld_ifc,db_gpio_ifc,rf_core_full
|
|
|
|
# The device tree source file $(BUILD_DIR)/device_tree.dts is generated by the
|
|
# RFNoC image builder.
|
|
$(BUILD_DIR)/X410.dts: $(BUILD_DIR)/device_tree.dts dts/x410-version-info.dtsi dts/*.dtsi
|
|
${CC} -o $@ -C -E -I dts -nostdinc -undef -x assembler-with-cpp -D__DTS__ $<
|
|
|
|
# The device tree source file $(BUILD_DIR)/device_tree.dts is generated by the
|
|
# RFNoC image builder.
|
|
$(BUILD_DIR)/X440.dts: $(BUILD_DIR)/device_tree.dts dts/x440-version-info.dtsi dts/*.dtsi
|
|
${CC} -o $@ -C -E -I dts -nostdinc -undef -x assembler-with-cpp -D__DTS__ $<
|
|
|
|
clean: ##Clean up all target build outputs.
|
|
@echo "Cleaning targets..."
|
|
@rm -rf $(BUILD_BASE_DIR)/build-X* $(BUILD_BASE_DIR)/build-x* $(BUILD_BASE_DIR)/build-usrp* $(BUILD_DIR)
|
|
@rm -rf $(BUILD_OUTPUT_DIR)
|
|
|
|
cleanall: ##Clean up all target and IP build outputs.
|
|
@echo "Cleaning targets and IP..."
|
|
@rm -rf build-ip
|
|
@rm -rf $(BUILD_BASE_DIR)/build-* $(BUILD_DIR)
|
|
@rm -rf $(BUILD_OUTPUT_DIR)
|
|
|
|
help: ##Show this help message.
|
|
@grep -h "##" Makefile | grep -v "\"##\"" | sed -e 's/\\$$//' | sed -e 's/##//'
|
|
|
|
##
|
|
##Supported Options
|
|
##-----------------
|
|
##INCR_BUILD=0 Use incremental Vivado build to speed up consecutive runs
|
|
##GUI=1 Launch the build in the Vivado GUI.
|
|
##PROJECT=1 Save Vivado project file, otherwise it's created in memory.
|
|
##CHECK=1 Launch the syntax checker instead of building a bitfile.
|
|
##IP_ONLY=1 Launch the build but stop after IP generation.
|
|
##SYNTH=1 Launch the build but stop after synthesis.
|
|
##SECURE_CORE=1 Launch a build of the secure image core only.
|
|
##BUILD_SEED=<N> Build seed to used to affect build results. (Default is 0)
|
|
##TOP=<module> Specify a top module for syntax checking. (Default is the bitfile top)
|
|
|
|
.PHONY: all clean cleanall help
|