mschill
4ae2f8eb5e
Together with an update to the LMK04832 register config according to TIs data sheet, all clock outputs are now aligned to SYSREF rising edge. Therefore, I needed to adjust the SYSREF capture mechanism inside the RFSoC and the SYSREF LMK Delay. SYSREF is now captured first at the falling edge of PRC. To be on the safe side, we are still double synchronizing SYSREF afterwards on the rising edges of PRC. As we are now independent of any MCR regarding timing constraints the SYSREF Delay is also set to '0' for all X4xx devices. Original-commit: b5cb4fac42ab530174e108455b730ffa1510d70a
131 lines
7.0 KiB
Tcl
131 lines
7.0 KiB
Tcl
#
|
|
# Copyright 2022 Ettus Research, a National Instruments Brand
|
|
#
|
|
# SPDX-License-Identifier: LGPL-3.0-or-later
|
|
#
|
|
# Description:
|
|
# Timing constraints exclusive to X440. These should be used
|
|
# in conjunction with ./common.xdc
|
|
#
|
|
|
|
###############################################################################
|
|
# DB GPIO
|
|
# This interface is defined as system synchronous to pll_ref_clk.
|
|
# Some timing constants in this section are declared in
|
|
# <repo>/fpga/usrp3/top/x400/constraints/timing/shared_constants.sdc
|
|
###############################################################################
|
|
|
|
# In the current db_gpio_interface implementation, all GPIOs are received asynchronously
|
|
# by the DB, so we add a very relax constraint for these signals.
|
|
set db_gpio_min 0
|
|
set db_gpio_max [expr {$pll_ref_clk_period/2}]
|
|
set db_gpio_sync_max 3.500
|
|
|
|
# Set constraints for all ports.
|
|
set db_gpio_ports [get_ports {DB0_GPIO[*] DB1_GPIO[*]}]
|
|
set db_gpio_sync_ports [get_ports {DB0_GPIO[12] DB0_GPIO[13] DB1_GPIO[16] DB1_GPIO[17]}]
|
|
|
|
set_output_delay -clock [get_clocks pll_ref_clk] -min $db_gpio_min $db_gpio_ports
|
|
set_output_delay -clock [get_clocks pll_ref_clk] -max $db_gpio_max $db_gpio_ports
|
|
# Should just overwrite the setting for the sync clock ports that are also in db_gpio_ports
|
|
set_output_delay -clock [get_clocks ref_clk] -max $db_gpio_sync_max $db_gpio_sync_ports
|
|
|
|
set_input_delay -clock [get_clocks pll_ref_clk] -max $db_gpio_min $db_gpio_ports
|
|
set_input_delay -clock [get_clocks pll_ref_clk] -min $db_gpio_max $db_gpio_ports
|
|
|
|
# Use multi cycle path constraint to relax timing on these pins.
|
|
set_multicycle_path -setup 2 -from [get_pins db_gpio_gen[*].db_gpio_interface_i/ctrlport_to_i2c_inst/i2c_master/byte_controller/bit_controller/*_oen_reg/C]
|
|
set_multicycle_path -end -hold 7 -from [get_pins db_gpio_gen[*].db_gpio_interface_i/ctrlport_to_i2c_inst/i2c_master/byte_controller/bit_controller/*_oen_reg/C]
|
|
###############################################################################
|
|
# x440_ps_rfdc_bd
|
|
###############################################################################
|
|
|
|
# This property tells Vivado that we require these clocks to be well aligned.
|
|
# We have synchronous clock domain crossings between these clocks that can have
|
|
# large hold violations after placement due to uneven clock loading.
|
|
set_property CLOCK_DELAY_GROUP DataClkGroup [get_nets -hier -filter {\
|
|
NAME=~*/rfdc/data_clock_mmcm/inst/CLK_CORE_DRP_I/clk_inst/data_clk ||\
|
|
NAME=~*/rfdc/data_clock_mmcm/inst/CLK_CORE_DRP_I/clk_inst/data_clk_2x ||\
|
|
NAME=~*/rfdc/data_clock_mmcm/inst/CLK_CORE_DRP_I/clk_inst/pll_ref_clk_out ||\
|
|
NAME=~*/rfdc/data_clock_mmcm/inst/CLK_CORE_DRP_I/clk_inst/radio0_rfdc_clk ||\
|
|
NAME=~*/rfdc/data_clock_mmcm/inst/CLK_CORE_DRP_I/clk_inst/radio0_rfdc_clk_2x ||\
|
|
NAME=~*/rfdc/data_clock_mmcm/inst/CLK_CORE_DRP_I/clk_inst/radio1_rfdc_clk ||\
|
|
NAME=~*/rfdc/data_clock_mmcm/inst/CLK_CORE_DRP_I/clk_inst/radio1_rfdc_clk_2x \
|
|
}]
|
|
|
|
# We treat rfdc_clk buffers as asynchronous, with knowledge that
|
|
# code clocked in this domain will be reset after this clocked is enabled. This
|
|
# will make timing easier to meet on these clock domains.
|
|
set_false_path -from [get_pins -hierarchical -filter {NAME =~ */rfdc/clock_gates_0/*rEnableRfdc0Bufg1x*/C}] \
|
|
-to [get_pins -hierarchical -filter {NAME =~ */rfdc/rf_clock_buffers/rf0_clk_1x_buf/*BUFGCE*/CE}]
|
|
|
|
set_false_path -from [get_pins -hierarchical -filter {NAME =~ */rfdc/clock_gates_0/*rEnableRfdc0Bufg2x*/C}] \
|
|
-to [get_pins -hierarchical -filter {NAME =~ */rfdc/rf_clock_buffers/rf0_clk_2x_buf/*BUFGCE*/CE}]
|
|
|
|
set_false_path -from [get_pins -hierarchical -filter {NAME =~ */rfdc/clock_gates_0/*rEnableRfdc1Bufg1x*/C}] \
|
|
-to [get_pins -hierarchical -filter {NAME =~ */rfdc/rf_clock_buffers/rf1_clk_1x_buf/*BUFGCE*/CE}]
|
|
|
|
set_false_path -from [get_pins -hierarchical -filter {NAME =~ */rfdc/clock_gates_0/*rEnableRfdc1Bufg2x*/C}] \
|
|
-to [get_pins -hierarchical -filter {NAME =~ */rfdc/rf_clock_buffers/rf1_clk_2x_buf/*BUFGCE*/CE}]
|
|
|
|
|
|
###############################################################################
|
|
# SPLL SYSREF Capture
|
|
###############################################################################
|
|
|
|
# SYSREF is generated by the LMK04832 clocking chip (SPLL), which also produces
|
|
# the PLL reference clock (PRC) used to generate data clocks with a MMCM. Both
|
|
# SYSREF and PLL reference clock are directly fed into the RFSoC.
|
|
# The LMK04832 is configured to output all clocks synchronized to the
|
|
# rising edge of SYSREF. SYSREF is first captured by the FPGA fabric in the
|
|
# PRC clock domain (MMCM's PRC output) on the falling edge to meet setup and
|
|
# hold times. Afterwards it is captured with a double synchronizer and then
|
|
# transferred to the RFDC clock domain. Both SYSREF versions (PRC and RFDC)
|
|
# are used by downstream logic for sync purposes.
|
|
# The highest PRC frequency supported in MPM (64 MHz) is used for
|
|
# timing constraints.
|
|
# Set SYSREF LMK Delay to 0 ns as we assume rising edge alignment from the
|
|
# LMK04832 chip.
|
|
set sysref_lmk_delay 0
|
|
#
|
|
# These are the signals' lengths and corresponding delays (assuming 170 ps/in):
|
|
# - SYSREF --> 5794 mils (5.794 inches) = 0.985 ns
|
|
# - PRC --> 5668 mils (5.668 inches) = 0.964 ns
|
|
#
|
|
# For min/max input delay calculations, it is assumed min prop. delay of 0 ns,
|
|
# which essentially over-constrains SYSREF.
|
|
#
|
|
# The max input delay is the latest that SYSREF may arrive w.r.t PRC, and it is
|
|
# calculated as follows:
|
|
# Input delay (max) = SYSREF's LMK delay + SYSREF prop. delay (max)
|
|
# - PRC prop. delay (min)
|
|
set sysref_max_input_delay [expr {$sysref_lmk_delay + 0.985 - 0}]
|
|
#
|
|
# The min input delay is the earliest that SYSREF may arrive w.r.t PRC, and it
|
|
# is calculated as follows:
|
|
# Input delay (min) = SYSREF's LMK delay + SYSREF prop. delay (min)
|
|
# - PRC prop. delay (min)
|
|
set sysref_min_input_delay [expr {$sysref_lmk_delay + 0 - 0.964}]
|
|
|
|
set_input_delay -clock pll_ref_clk -max $sysref_max_input_delay [get_ports {SYSREF_FABRIC_P}]
|
|
set_input_delay -clock pll_ref_clk -min $sysref_min_input_delay [get_ports {SYSREF_FABRIC_P}]
|
|
|
|
###############################################################################
|
|
# SPI to MB CPLD (PL)
|
|
# This interface is defined as system synchronous to pll_ref_clk.
|
|
###############################################################################
|
|
|
|
# The output delays are chosen to allow a large time window of valid data for
|
|
# the MB CPLD logic.
|
|
set spi_min_out_delay -1.500
|
|
set spi_max_out_delay 9.500
|
|
|
|
# Set output constraints for all ports.
|
|
set spi_out_ports [get_ports {PL_CPLD_SCLK PL_CPLD_MOSI PL_CPLD_CS0_n PL_CPLD_CS1_n}]
|
|
set_output_delay -clock [get_clocks pll_ref_clk] -min $spi_min_out_delay $spi_out_ports
|
|
set_output_delay -clock [get_clocks pll_ref_clk] -max $spi_max_out_delay $spi_out_ports
|
|
|
|
# Force SPI registers into IOB.
|
|
set_property IOB TRUE [get_cells "cpld_interface_i/ctrlport_spi_master_i/simple_spi_core_64bit_i/sclk_reg"]
|
|
set_property IOB TRUE [get_cells "cpld_interface_i/ctrlport_spi_master_i/simple_spi_core_64bit_i/mosi_reg"]
|