Files
b210-k7-fpga/lib/fifo/axis_strm_monitor.v
T
Wade Fife cc5c306897 fpga: lib: Fix axis_strm_monitor parameters
Original-commit: a51ccbba88d6a3f3012b84a1eed55725d41c7fd7
2020-10-20 21:10:16 -05:00

110 lines
2.8 KiB
Verilog

//
// Copyright 2018 Ettus Research, a National Instruments Company
//
// SPDX-License-Identifier: LGPL-3.0-or-later
//
// Description:
// A module to monitor a an AXI-Stream link and gather various
// metric about packets and the stream in general
module axis_strm_monitor #(
parameter WIDTH = 64,
parameter COUNT_W = 32,
parameter PKT_LENGTH_EN = 0,
parameter PKT_CHKSUM_EN = 0,
parameter PKT_COUNT_EN = 0,
parameter XFER_COUNT_EN = 0
)(
// Clocks and resets
input wire clk,
input wire reset,
// Stream to monitor
input wire [WIDTH-1:0] axis_tdata,
input wire axis_tlast,
input wire axis_tvalid,
input wire axis_tready,
// Packet Stats
output wire sop,
output wire eop,
output reg [15:0] pkt_length = 16'd0,
output wire [WIDTH-1:0] pkt_chksum,
// Stream Stats
output reg [COUNT_W-1:0] pkt_count = {COUNT_W{1'b0}},
output reg [COUNT_W-1:0] xfer_count = {COUNT_W{1'b0}}
);
//----------------------------
// Packet specific
//----------------------------
reg pkt_head = 1'b1;
wire xfer = axis_tvalid & axis_tready;
assign sop = pkt_head & xfer;
assign eop = xfer & axis_tlast;
always @(posedge clk) begin
if (reset) begin
pkt_head <= 1'b1;
end else begin
if (pkt_head) begin
if (xfer)
pkt_head <= ~eop;
end else begin
if (eop)
pkt_head <= 1'b0;
end
end
end
generate if (PKT_LENGTH_EN) begin
// Count the number of lines (transfers) in a packet
always @(posedge clk) begin
if (reset | eop) begin
pkt_length <= 16'd1;
end else if (xfer) begin
pkt_length <= pkt_length + 1'b1;
end
end
end else begin
// Default packet length is 0
always @(*) pkt_length <= 16'd0;
end endgenerate
generate if (PKT_CHKSUM_EN) begin
// Compute the XOR checksum of the lines in a packet
reg [WIDTH-1:0] chksum_prev = {WIDTH{1'b0}};
always @(posedge clk) begin
if (reset) begin
chksum_prev <= {WIDTH{1'b0}};
end else if (xfer) begin
chksum_prev <= pkt_chksum;
end
end
assign pkt_chksum = chksum_prev ^ axis_tdata;
end else begin
// Default checksum is 0
assign pkt_chksum = {WIDTH{1'b0}};
end endgenerate
//----------------------------
// Stream specific
//----------------------------
always @(posedge clk) begin
if (reset | (PKT_COUNT_EN == 0)) begin
pkt_count <= {COUNT_W{1'b0}};
end else if (eop) begin
pkt_count <= pkt_count + 1'b1;
end
end
always @(posedge clk) begin
if (reset | (XFER_COUNT_EN == 0)) begin
xfer_count <= {COUNT_W{1'b0}};
end else if (xfer) begin
xfer_count <= xfer_count + 1'b1;
end
end
endmodule