243 lines
9.0 KiB
Verilog
243 lines
9.0 KiB
Verilog
//
|
|
// Copyright 2020 Ettus Research, a National Instruments Brand
|
|
//
|
|
// SPDX-License-Identifier: LGPL-3.0-or-later
|
|
//
|
|
// Module: rfnoc_block_siggen
|
|
//
|
|
// Description:
|
|
//
|
|
// Signal generator RFNoC block. This block outputs packets of one of three
|
|
// output types based on the REG_WAVEFORM register setting. Supported modes
|
|
// include constant, sinusoidal, and noise/random. The output is also run
|
|
// through a gain stage that is configurable using the REG_GAIN register.
|
|
// See the register descriptions in rfnoc_block_siggen_regs.vh for details.
|
|
//
|
|
// The sine output is based on the Xilinx CORDIC IP, configured for the
|
|
// rotate function, with scaled radians as the units. See the CORDIC user
|
|
// guide (PG105) and register descriptions for details.
|
|
//
|
|
// Parameters:
|
|
//
|
|
// THIS_PORTID : Control crossbar port to which this block is connected
|
|
// CHDR_W : AXIS-CHDR data bus width
|
|
// MTU : Maximum transmission unit (i.e., maximum packet size in
|
|
// CHDR words is 2**MTU).
|
|
// NUM_PORTS : Number of siggen cores to instantiate.
|
|
//
|
|
|
|
`default_nettype none
|
|
|
|
|
|
module rfnoc_block_siggen #(
|
|
parameter [9:0] THIS_PORTID = 10 'd0,
|
|
parameter CHDR_W = 64,
|
|
parameter [5:0] MTU = 10,
|
|
parameter NUM_PORTS = 1
|
|
) (
|
|
// RFNoC Framework Clocks and Resets
|
|
input wire rfnoc_chdr_clk,
|
|
input wire rfnoc_ctrl_clk,
|
|
input wire ce_clk,
|
|
// RFNoC Backend Interface
|
|
input wire [ 511:0] rfnoc_core_config,
|
|
output wire [ 511:0] rfnoc_core_status,
|
|
// AXIS-CHDR Input Ports (from framework)
|
|
input wire [ CHDR_W-1:0] s_rfnoc_chdr_tdata,
|
|
input wire s_rfnoc_chdr_tlast,
|
|
input wire s_rfnoc_chdr_tvalid,
|
|
output wire s_rfnoc_chdr_tready,
|
|
// AXIS-CHDR Output Ports (to framework)
|
|
output wire [NUM_PORTS*CHDR_W-1:0] m_rfnoc_chdr_tdata,
|
|
output wire [ NUM_PORTS-1:0] m_rfnoc_chdr_tlast,
|
|
output wire [ NUM_PORTS-1:0] m_rfnoc_chdr_tvalid,
|
|
input wire [ NUM_PORTS-1:0] m_rfnoc_chdr_tready,
|
|
// AXIS-Ctrl Input Port (from framework)
|
|
input wire [ 31:0] s_rfnoc_ctrl_tdata,
|
|
input wire s_rfnoc_ctrl_tlast,
|
|
input wire s_rfnoc_ctrl_tvalid,
|
|
output wire s_rfnoc_ctrl_tready,
|
|
// AXIS-Ctrl Output Port (to framework)
|
|
output wire [ 31:0] m_rfnoc_ctrl_tdata,
|
|
output wire m_rfnoc_ctrl_tlast,
|
|
output wire m_rfnoc_ctrl_tvalid,
|
|
input wire m_rfnoc_ctrl_tready
|
|
);
|
|
|
|
`include "rfnoc_block_siggen_regs.vh"
|
|
|
|
|
|
//---------------------------------------------------------------------------
|
|
// Signal Declarations
|
|
//---------------------------------------------------------------------------
|
|
|
|
// CtrlPort Master
|
|
wire m_ctrlport_req_wr;
|
|
wire m_ctrlport_req_rd;
|
|
wire [19:0] m_ctrlport_req_addr;
|
|
wire [31:0] m_ctrlport_req_data;
|
|
wire m_ctrlport_resp_ack;
|
|
wire [31:0] m_ctrlport_resp_data;
|
|
// Data Stream to User Logic: out
|
|
wire [NUM_PORTS*32*1-1:0] s_out_axis_tdata;
|
|
wire [ NUM_PORTS-1:0] s_out_axis_tlast;
|
|
wire [ NUM_PORTS-1:0] s_out_axis_tvalid;
|
|
wire [ NUM_PORTS-1:0] s_out_axis_tready;
|
|
wire [ NUM_PORTS*16-1:0] s_out_axis_tlength;
|
|
|
|
|
|
//---------------------------------------------------------------------------
|
|
// NoC Shell
|
|
//---------------------------------------------------------------------------
|
|
|
|
wire ce_rst;
|
|
|
|
noc_shell_siggen #(
|
|
.CHDR_W (CHDR_W),
|
|
.THIS_PORTID (THIS_PORTID),
|
|
.MTU (MTU),
|
|
.NUM_PORTS (NUM_PORTS)
|
|
) noc_shell_siggen_i (
|
|
//---------------------
|
|
// Framework Interface
|
|
//---------------------
|
|
|
|
// Clock Inputs
|
|
.rfnoc_chdr_clk (rfnoc_chdr_clk),
|
|
.rfnoc_ctrl_clk (rfnoc_ctrl_clk),
|
|
.ce_clk (ce_clk),
|
|
// Reset Outputs
|
|
.rfnoc_chdr_rst (),
|
|
.rfnoc_ctrl_rst (),
|
|
.ce_rst (ce_rst),
|
|
// RFNoC Backend Interface
|
|
.rfnoc_core_config (rfnoc_core_config),
|
|
.rfnoc_core_status (rfnoc_core_status),
|
|
// CHDR Input Ports (from framework)
|
|
.s_rfnoc_chdr_tdata (s_rfnoc_chdr_tdata),
|
|
.s_rfnoc_chdr_tlast (s_rfnoc_chdr_tlast),
|
|
.s_rfnoc_chdr_tvalid (s_rfnoc_chdr_tvalid),
|
|
.s_rfnoc_chdr_tready (s_rfnoc_chdr_tready),
|
|
// CHDR Output Ports (to framework)
|
|
.m_rfnoc_chdr_tdata (m_rfnoc_chdr_tdata),
|
|
.m_rfnoc_chdr_tlast (m_rfnoc_chdr_tlast),
|
|
.m_rfnoc_chdr_tvalid (m_rfnoc_chdr_tvalid),
|
|
.m_rfnoc_chdr_tready (m_rfnoc_chdr_tready),
|
|
// AXIS-Ctrl Input Port (from framework)
|
|
.s_rfnoc_ctrl_tdata (s_rfnoc_ctrl_tdata),
|
|
.s_rfnoc_ctrl_tlast (s_rfnoc_ctrl_tlast),
|
|
.s_rfnoc_ctrl_tvalid (s_rfnoc_ctrl_tvalid),
|
|
.s_rfnoc_ctrl_tready (s_rfnoc_ctrl_tready),
|
|
// AXIS-Ctrl Output Port (to framework)
|
|
.m_rfnoc_ctrl_tdata (m_rfnoc_ctrl_tdata),
|
|
.m_rfnoc_ctrl_tlast (m_rfnoc_ctrl_tlast),
|
|
.m_rfnoc_ctrl_tvalid (m_rfnoc_ctrl_tvalid),
|
|
.m_rfnoc_ctrl_tready (m_rfnoc_ctrl_tready),
|
|
|
|
//---------------------
|
|
// Client Interface
|
|
//---------------------
|
|
|
|
// CtrlPort Clock and Reset
|
|
.ctrlport_clk (),
|
|
.ctrlport_rst (),
|
|
// CtrlPort Master
|
|
.m_ctrlport_req_wr (m_ctrlport_req_wr),
|
|
.m_ctrlport_req_rd (m_ctrlport_req_rd),
|
|
.m_ctrlport_req_addr (m_ctrlport_req_addr),
|
|
.m_ctrlport_req_data (m_ctrlport_req_data),
|
|
.m_ctrlport_resp_ack (m_ctrlport_resp_ack),
|
|
.m_ctrlport_resp_data (m_ctrlport_resp_data),
|
|
|
|
// AXI-Stream Clock and Reset
|
|
.axis_data_clk (),
|
|
.axis_data_rst (),
|
|
// Data Stream from User Logic: out
|
|
.s_out_axis_tdata (s_out_axis_tdata),
|
|
.s_out_axis_tkeep ({NUM_PORTS{1'b1}}),
|
|
.s_out_axis_tlast (s_out_axis_tlast),
|
|
.s_out_axis_tvalid (s_out_axis_tvalid),
|
|
.s_out_axis_tready (s_out_axis_tready),
|
|
.s_out_axis_ttimestamp ({NUM_PORTS{64'b0}}),
|
|
.s_out_axis_thas_time ({NUM_PORTS{1'b0}}),
|
|
.s_out_axis_tlength (s_out_axis_tlength),
|
|
.s_out_axis_teov ({NUM_PORTS{1'b0}}),
|
|
.s_out_axis_teob ({NUM_PORTS{1'b0}})
|
|
);
|
|
|
|
|
|
//---------------------------------------------------------------------------
|
|
// CtrlPort Splitter
|
|
//---------------------------------------------------------------------------
|
|
|
|
// Create a CtrlPort bus for each port instance
|
|
|
|
wire [ 1*NUM_PORTS-1:0] ctrlport_req_wr;
|
|
wire [ 1*NUM_PORTS-1:0] ctrlport_req_rd;
|
|
wire [20*NUM_PORTS-1:0] ctrlport_req_addr;
|
|
wire [32*NUM_PORTS-1:0] ctrlport_req_data;
|
|
wire [ 1*NUM_PORTS-1:0] ctrlport_resp_ack;
|
|
wire [32*NUM_PORTS-1:0] ctrlport_resp_data;
|
|
|
|
ctrlport_decoder #(
|
|
.NUM_SLAVES (NUM_PORTS),
|
|
.BASE_ADDR (0),
|
|
.SLAVE_ADDR_W (SIGGEN_ADDR_W)
|
|
) ctrlport_decoder_i (
|
|
.ctrlport_clk (ce_clk),
|
|
.ctrlport_rst (ce_rst),
|
|
.s_ctrlport_req_wr (m_ctrlport_req_wr),
|
|
.s_ctrlport_req_rd (m_ctrlport_req_rd),
|
|
.s_ctrlport_req_addr (m_ctrlport_req_addr),
|
|
.s_ctrlport_req_data (m_ctrlport_req_data),
|
|
.s_ctrlport_req_byte_en (4'hF),
|
|
.s_ctrlport_req_has_time (1'b0),
|
|
.s_ctrlport_req_time (64'b0),
|
|
.s_ctrlport_resp_ack (m_ctrlport_resp_ack),
|
|
.s_ctrlport_resp_status (),
|
|
.s_ctrlport_resp_data (m_ctrlport_resp_data),
|
|
.m_ctrlport_req_wr (ctrlport_req_wr),
|
|
.m_ctrlport_req_rd (ctrlport_req_rd),
|
|
.m_ctrlport_req_addr (ctrlport_req_addr),
|
|
.m_ctrlport_req_data (ctrlport_req_data),
|
|
.m_ctrlport_req_byte_en (),
|
|
.m_ctrlport_req_has_time (),
|
|
.m_ctrlport_req_time (),
|
|
.m_ctrlport_resp_ack (ctrlport_resp_ack),
|
|
.m_ctrlport_resp_status ({NUM_PORTS{2'b0}}),
|
|
.m_ctrlport_resp_data (ctrlport_resp_data)
|
|
);
|
|
|
|
|
|
//---------------------------------------------------------------------------
|
|
// Port Instances
|
|
//---------------------------------------------------------------------------
|
|
|
|
genvar port;
|
|
generate
|
|
for (port = 0; port < NUM_PORTS; port = port+1) begin : gen_ports
|
|
|
|
rfnoc_siggen_core rfnoc_siggen_core_i (
|
|
.clk (ce_clk),
|
|
.rst (ce_rst),
|
|
.s_ctrlport_req_wr (ctrlport_req_wr [port* 1 +: 1]),
|
|
.s_ctrlport_req_rd (ctrlport_req_rd [port* 1 +: 1]),
|
|
.s_ctrlport_req_addr (ctrlport_req_addr [port*20 +: 20]),
|
|
.s_ctrlport_req_data (ctrlport_req_data [port*32 +: 32]),
|
|
.s_ctrlport_resp_ack (ctrlport_resp_ack [port* 1 +: 1]),
|
|
.s_ctrlport_resp_data (ctrlport_resp_data [port*32 +: 32]),
|
|
.m_tdata (s_out_axis_tdata [port*32 +: 32]),
|
|
.m_tlast (s_out_axis_tlast [port* 1 +: 1]),
|
|
.m_tvalid (s_out_axis_tvalid [port* 1 +: 1]),
|
|
.m_tready (s_out_axis_tready [port* 1 +: 1]),
|
|
.m_tlength (s_out_axis_tlength [port*16 +: 16])
|
|
);
|
|
|
|
end
|
|
endgenerate
|
|
|
|
endmodule // rfnoc_block_siggen
|
|
|
|
|
|
`default_nettype wire
|