Merge FPGA repository back into UHD repository
The FPGA codebase was removed from the UHD repository in 2014 to reduce the size of the repository. However, over the last half-decade, the split between the repositories has proven more burdensome than it has been helpful. By merging the FPGA code back, it will be possible to create atomic commits that touch both FPGA and UHD codebases. Continuous integration testing is also simplified by merging the repositories, because it was previously difficult to automatically derive the correct UHD branch when testing a feature branch on the FPGA repository. This commit also updates the license files and paths therein. We are therefore merging the repositories again. Future development for FPGA code will happen in the same repository as the UHD host code and MPM code. == Original Codebase and Rebasing == The original FPGA repository will be hosted for the foreseeable future at its original local location: https://github.com/EttusResearch/fpga/ It can be used for bisecting, reference, and a more detailed history. The final commit from said repository to be merged here is 05003794e2da61cabf64dd278c45685a7abad7ec. This commit is tagged as v4.0.0.0-pre-uhd-merge. If you have changes in the FPGA repository that you want to rebase onto the UHD repository, simply run the following commands: - Create a directory to store patches (this should be an empty directory): mkdir ~/patches - Now make sure that your FPGA codebase is based on the same state as the code that was merged: cd src/fpga # Or wherever your FPGA code is stored git rebase v4.0.0.0-pre-uhd-merge Note: The rebase command may look slightly different depending on what exactly you're trying to rebase. - Create a patch set for your changes versus v4.0.0.0-pre-uhd-merge: git format-patch v4.0.0.0-pre-uhd-merge -o ~/patches Note: Make sure that only patches are stored in your output directory. It should otherwise be empty. Make sure that you picked the correct range of commits, and only commits you wanted to rebase were exported as patch files. - Go to the UHD repository and apply the patches: cd src/uhd # Or wherever your UHD repository is stored git am --directory fpga ~/patches/* rm -rf ~/patches # This is for cleanup == Contributors == The following people have contributed mainly to these files (this list is not complete): Co-authored-by: Alex Williams <alex.williams@ni.com> Co-authored-by: Andrej Rode <andrej.rode@ettus.com> Co-authored-by: Ashish Chaudhari <ashish@ettus.com> Co-authored-by: Ben Hilburn <ben.hilburn@ettus.com> Co-authored-by: Ciro Nishiguchi <ciro.nishiguchi@ni.com> Co-authored-by: Daniel Jepson <daniel.jepson@ni.com> Co-authored-by: Derek Kozel <derek.kozel@ettus.com> Co-authored-by: EJ Kreinar <ej@he360.com> Co-authored-by: Humberto Jimenez <humberto.jimenez@ni.com> Co-authored-by: Ian Buckley <ian.buckley@gmail.com> Co-authored-by: Jörg Hofrichter <joerg.hofrichter@ni.com> Co-authored-by: Jon Kiser <jon.kiser@ni.com> Co-authored-by: Josh Blum <josh@joshknows.com> Co-authored-by: Jonathon Pendlum <jonathan.pendlum@ettus.com> Co-authored-by: Martin Braun <martin.braun@ettus.com> Co-authored-by: Matt Ettus <matt@ettus.com> Co-authored-by: Michael West <michael.west@ettus.com> Co-authored-by: Moritz Fischer <moritz.fischer@ettus.com> Co-authored-by: Nick Foster <nick@ettus.com> Co-authored-by: Nicolas Cuervo <nicolas.cuervo@ettus.com> Co-authored-by: Paul Butler <paul.butler@ni.com> Co-authored-by: Paul David <paul.david@ettus.com> Co-authored-by: Ryan Marlow <ryan.marlow@ettus.com> Co-authored-by: Sugandha Gupta <sugandha.gupta@ettus.com> Co-authored-by: Sylvain Munaut <tnt@246tNt.com> Co-authored-by: Trung Tran <trung.tran@ettus.com> Co-authored-by: Vidush Vishwanath <vidush.vishwanath@ettus.com> Co-authored-by: Wade Fife <wade.fife@ettus.com> Original-commit: bafa9d95453387814ef25e6b6256ba8db2df612f
This commit is contained in:
Martin Braun
co-authored by
Alex Williams
Andrej Rode
Ashish Chaudhari
Ben Hilburn
Ciro Nishiguchi
Daniel Jepson
Derek Kozel
EJ Kreinar
Humberto Jimenez
Ian Buckley
Jörg Hofrichter
Jon Kiser
Josh Blum
Jonathon Pendlum
Matt Ettus
Michael West
Moritz Fischer
Nick Foster
Nicolas Cuervo
Paul Butler
Paul David
Ryan Marlow
Sugandha Gupta
Sylvain Munaut
Trung Tran
Vidush Vishwanath
Wade Fife
Alex Williams
Andrej Rode
Ashish Chaudhari
Ben Hilburn
Ciro Nishiguchi
Daniel Jepson
Derek Kozel
EJ Kreinar
Humberto Jimenez
Ian Buckley
Jörg Hofrichter
Jon Kiser
Josh Blum
Jonathon Pendlum
Matt Ettus
Michael West
Moritz Fischer
Nick Foster
Nicolas Cuervo
Paul Butler
Paul David
Ryan Marlow
Sugandha Gupta
Sylvain Munaut
Trung Tran
Vidush Vishwanath
Wade Fife
parent
74893643ca
commit
6b67702ad7
@@ -0,0 +1,51 @@
|
||||
####################################################################################
|
||||
####################################################################################
|
||||
## Copyright 2011(c) Analog Devices, Inc.
|
||||
## Auto-generated, do not modify!
|
||||
####################################################################################
|
||||
####################################################################################
|
||||
|
||||
M_DEPS += ../common/sync_bits.v
|
||||
M_DEPS += ../common/sync_gray.v
|
||||
M_DEPS += ../scripts/adi_env.tcl
|
||||
M_DEPS += ../scripts/adi_ip.tcl
|
||||
M_DEPS += address_gray.v
|
||||
M_DEPS += address_gray_pipelined.v
|
||||
M_DEPS += address_sync.v
|
||||
M_DEPS += util_axis_fifo.v
|
||||
M_DEPS += util_axis_fifo_ip.tcl
|
||||
|
||||
M_VIVADO := vivado -mode batch -source
|
||||
|
||||
M_FLIST := *.cache
|
||||
M_FLIST += *.data
|
||||
M_FLIST += *.xpr
|
||||
M_FLIST += *.log
|
||||
M_FLIST += component.xml
|
||||
M_FLIST += *.jou
|
||||
M_FLIST += xgui
|
||||
M_FLIST += *.ip_user_files
|
||||
M_FLIST += *.srcs
|
||||
M_FLIST += *.hw
|
||||
M_FLIST += *.sim
|
||||
M_FLIST += .Xil
|
||||
|
||||
|
||||
|
||||
.PHONY: all clean clean-all
|
||||
all: util_axis_fifo.xpr
|
||||
|
||||
|
||||
clean:clean-all
|
||||
|
||||
|
||||
clean-all:
|
||||
rm -rf $(M_FLIST)
|
||||
|
||||
|
||||
util_axis_fifo.xpr: $(M_DEPS)
|
||||
-rm -rf $(M_FLIST)
|
||||
$(M_VIVADO) util_axis_fifo_ip.tcl >> util_axis_fifo_ip.log 2>&1
|
||||
|
||||
####################################################################################
|
||||
####################################################################################
|
||||
@@ -0,0 +1,156 @@
|
||||
// ***************************************************************************
|
||||
// ***************************************************************************
|
||||
// Copyright 2013(c) Analog Devices, Inc.
|
||||
// Author: Lars-Peter Clausen <lars@metafoo.de>
|
||||
//
|
||||
// All rights reserved.
|
||||
//
|
||||
// Redistribution and use in source and binary forms, with or without modification,
|
||||
// are permitted provided that the following conditions are met:
|
||||
// - Redistributions of source code must retain the above copyright
|
||||
// notice, this list of conditions and the following disclaimer.
|
||||
// - Redistributions in binary form must reproduce the above copyright
|
||||
// notice, this list of conditions and the following disclaimer in
|
||||
// the documentation and/or other materials provided with the
|
||||
// distribution.
|
||||
// - Neither the name of Analog Devices, Inc. nor the names of its
|
||||
// contributors may be used to endorse or promote products derived
|
||||
// from this software without specific prior written permission.
|
||||
// - The use of this software may or may not infringe the patent rights
|
||||
// of one or more patent holders. This license does not release you
|
||||
// from the requirement that you obtain separate licenses from these
|
||||
// patent holders to use this software.
|
||||
// - Use of the software either in source or binary form, must be run
|
||||
// on or directly connected to an Analog Devices Inc. component.
|
||||
//
|
||||
// THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
|
||||
// INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A
|
||||
// PARTICULAR PURPOSE ARE DISCLAIMED.
|
||||
//
|
||||
// IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
||||
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY
|
||||
// RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
|
||||
// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
|
||||
// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
// ***************************************************************************
|
||||
// ***************************************************************************
|
||||
|
||||
module fifo_address_gray (
|
||||
input m_axis_aclk,
|
||||
input m_axis_aresetn,
|
||||
input m_axis_ready,
|
||||
output reg m_axis_valid,
|
||||
output reg [ADDRESS_WIDTH:0] m_axis_level,
|
||||
|
||||
input s_axis_aclk,
|
||||
input s_axis_aresetn,
|
||||
output reg s_axis_ready,
|
||||
input s_axis_valid,
|
||||
output reg s_axis_empty,
|
||||
output [ADDRESS_WIDTH-1:0] s_axis_waddr,
|
||||
output reg [ADDRESS_WIDTH:0] s_axis_room
|
||||
);
|
||||
|
||||
parameter ADDRESS_WIDTH = 4;
|
||||
|
||||
reg [ADDRESS_WIDTH:0] _s_axis_waddr = 'h00;
|
||||
reg [ADDRESS_WIDTH:0] _s_axis_waddr_next;
|
||||
|
||||
reg [ADDRESS_WIDTH:0] _m_axis_raddr = 'h00;
|
||||
reg [ADDRESS_WIDTH:0] _m_axis_raddr_next;
|
||||
|
||||
reg [ADDRESS_WIDTH:0] s_axis_waddr_gray = 'h00;
|
||||
wire [ADDRESS_WIDTH:0] s_axis_waddr_gray_next;
|
||||
wire [ADDRESS_WIDTH:0] s_axis_raddr_gray;
|
||||
|
||||
reg [ADDRESS_WIDTH:0] m_axis_raddr_gray = 'h00;
|
||||
wire [ADDRESS_WIDTH:0] m_axis_raddr_gray_next;
|
||||
wire [ADDRESS_WIDTH:0] m_axis_waddr_gray;
|
||||
|
||||
assign s_axis_waddr = _s_axis_waddr[ADDRESS_WIDTH-1:0];
|
||||
|
||||
always @(*)
|
||||
begin
|
||||
if (s_axis_ready && s_axis_valid)
|
||||
_s_axis_waddr_next <= _s_axis_waddr + 1;
|
||||
else
|
||||
_s_axis_waddr_next <= _s_axis_waddr;
|
||||
end
|
||||
|
||||
assign s_axis_waddr_gray_next = _s_axis_waddr_next ^ _s_axis_waddr_next[ADDRESS_WIDTH:1];
|
||||
|
||||
always @(posedge s_axis_aclk)
|
||||
begin
|
||||
if (s_axis_aresetn == 1'b0) begin
|
||||
_s_axis_waddr <= 'h00;
|
||||
s_axis_waddr_gray <= 'h00;
|
||||
end else begin
|
||||
_s_axis_waddr <= _s_axis_waddr_next;
|
||||
s_axis_waddr_gray <= s_axis_waddr_gray_next;
|
||||
end
|
||||
end
|
||||
|
||||
always @(*)
|
||||
begin
|
||||
if (m_axis_ready && m_axis_valid)
|
||||
_m_axis_raddr_next <= _m_axis_raddr + 1;
|
||||
else
|
||||
_m_axis_raddr_next <= _m_axis_raddr;
|
||||
end
|
||||
|
||||
assign m_axis_raddr_gray_next = _m_axis_raddr_next ^ _m_axis_raddr_next[ADDRESS_WIDTH:1];
|
||||
|
||||
always @(posedge m_axis_aclk)
|
||||
begin
|
||||
if (m_axis_aresetn == 1'b0) begin
|
||||
_m_axis_raddr <= 'h00;
|
||||
m_axis_raddr_gray <= 'h00;
|
||||
end else begin
|
||||
_m_axis_raddr <= _m_axis_raddr_next;
|
||||
m_axis_raddr_gray <= m_axis_raddr_gray_next;
|
||||
end
|
||||
end
|
||||
|
||||
sync_bits #(
|
||||
.NUM_OF_BITS(ADDRESS_WIDTH + 1)
|
||||
) i_waddr_sync (
|
||||
.out_clk(m_axis_aclk),
|
||||
.out_resetn(m_axis_aresetn),
|
||||
.in(s_axis_waddr_gray),
|
||||
.out(m_axis_waddr_gray)
|
||||
);
|
||||
|
||||
sync_bits #(
|
||||
.NUM_OF_BITS(ADDRESS_WIDTH + 1)
|
||||
) i_raddr_sync (
|
||||
.out_clk(s_axis_aclk),
|
||||
.out_resetn(s_axis_aresetn),
|
||||
.in(m_axis_raddr_gray),
|
||||
.out(s_axis_raddr_gray)
|
||||
);
|
||||
|
||||
always @(posedge s_axis_aclk)
|
||||
begin
|
||||
if (s_axis_aresetn == 1'b0) begin
|
||||
s_axis_ready <= 1'b1;
|
||||
s_axis_empty <= 1'b1;
|
||||
end else begin
|
||||
s_axis_ready <= (s_axis_raddr_gray[ADDRESS_WIDTH] == s_axis_waddr_gray_next[ADDRESS_WIDTH] ||
|
||||
s_axis_raddr_gray[ADDRESS_WIDTH-1] == s_axis_waddr_gray_next[ADDRESS_WIDTH-1] ||
|
||||
s_axis_raddr_gray[ADDRESS_WIDTH-2:0] != s_axis_waddr_gray_next[ADDRESS_WIDTH-2:0]);
|
||||
s_axis_empty <= s_axis_raddr_gray == s_axis_waddr_gray_next;
|
||||
end
|
||||
end
|
||||
|
||||
always @(posedge m_axis_aclk)
|
||||
begin
|
||||
if (s_axis_aresetn == 1'b0)
|
||||
m_axis_valid <= 1'b0;
|
||||
else begin
|
||||
m_axis_valid <= m_axis_waddr_gray != m_axis_raddr_gray_next;
|
||||
end
|
||||
end
|
||||
|
||||
endmodule
|
||||
|
||||
@@ -0,0 +1,151 @@
|
||||
// ***************************************************************************
|
||||
// ***************************************************************************
|
||||
// Copyright 2013(c) Analog Devices, Inc.
|
||||
// Author: Lars-Peter Clausen <lars@metafoo.de>
|
||||
//
|
||||
// All rights reserved.
|
||||
//
|
||||
// Redistribution and use in source and binary forms, with or without modification,
|
||||
// are permitted provided that the following conditions are met:
|
||||
// - Redistributions of source code must retain the above copyright
|
||||
// notice, this list of conditions and the following disclaimer.
|
||||
// - Redistributions in binary form must reproduce the above copyright
|
||||
// notice, this list of conditions and the following disclaimer in
|
||||
// the documentation and/or other materials provided with the
|
||||
// distribution.
|
||||
// - Neither the name of Analog Devices, Inc. nor the names of its
|
||||
// contributors may be used to endorse or promote products derived
|
||||
// from this software without specific prior written permission.
|
||||
// - The use of this software may or may not infringe the patent rights
|
||||
// of one or more patent holders. This license does not release you
|
||||
// from the requirement that you obtain separate licenses from these
|
||||
// patent holders to use this software.
|
||||
// - Use of the software either in source or binary form, must be run
|
||||
// on or directly connected to an Analog Devices Inc. component.
|
||||
//
|
||||
// THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
|
||||
// INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A
|
||||
// PARTICULAR PURPOSE ARE DISCLAIMED.
|
||||
//
|
||||
// IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
||||
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY
|
||||
// RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
|
||||
// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
|
||||
// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
// ***************************************************************************
|
||||
// ***************************************************************************
|
||||
|
||||
module fifo_address_gray_pipelined (
|
||||
input m_axis_aclk,
|
||||
input m_axis_aresetn,
|
||||
input m_axis_ready,
|
||||
output reg m_axis_valid,
|
||||
output [ADDRESS_WIDTH-1:0] m_axis_raddr,
|
||||
output reg [ADDRESS_WIDTH:0] m_axis_level,
|
||||
|
||||
input s_axis_aclk,
|
||||
input s_axis_aresetn,
|
||||
output reg s_axis_ready,
|
||||
input s_axis_valid,
|
||||
output reg s_axis_empty,
|
||||
output [ADDRESS_WIDTH-1:0] s_axis_waddr,
|
||||
output reg [ADDRESS_WIDTH:0] s_axis_room
|
||||
);
|
||||
|
||||
parameter ADDRESS_WIDTH = 4;
|
||||
|
||||
reg [ADDRESS_WIDTH:0] _s_axis_waddr = 'h00;
|
||||
reg [ADDRESS_WIDTH:0] _s_axis_waddr_next;
|
||||
wire [ADDRESS_WIDTH:0] _s_axis_raddr;
|
||||
|
||||
reg [ADDRESS_WIDTH:0] _m_axis_raddr = 'h00;
|
||||
reg [ADDRESS_WIDTH:0] _m_axis_raddr_next;
|
||||
wire [ADDRESS_WIDTH:0] _m_axis_waddr;
|
||||
|
||||
assign s_axis_waddr = _s_axis_waddr[ADDRESS_WIDTH-1:0];
|
||||
assign m_axis_raddr = _m_axis_raddr[ADDRESS_WIDTH-1:0];
|
||||
|
||||
always @(*)
|
||||
begin
|
||||
if (s_axis_ready && s_axis_valid)
|
||||
_s_axis_waddr_next <= _s_axis_waddr + 1;
|
||||
else
|
||||
_s_axis_waddr_next <= _s_axis_waddr;
|
||||
end
|
||||
|
||||
always @(posedge s_axis_aclk)
|
||||
begin
|
||||
if (s_axis_aresetn == 1'b0) begin
|
||||
_s_axis_waddr <= 'h00;
|
||||
end else begin
|
||||
_s_axis_waddr <= _s_axis_waddr_next;
|
||||
end
|
||||
end
|
||||
|
||||
always @(*)
|
||||
begin
|
||||
if (m_axis_ready && m_axis_valid)
|
||||
_m_axis_raddr_next <= _m_axis_raddr + 1;
|
||||
else
|
||||
_m_axis_raddr_next <= _m_axis_raddr;
|
||||
end
|
||||
|
||||
always @(posedge m_axis_aclk)
|
||||
begin
|
||||
if (m_axis_aresetn == 1'b0) begin
|
||||
_m_axis_raddr <= 'h00;
|
||||
end else begin
|
||||
_m_axis_raddr <= _m_axis_raddr_next;
|
||||
end
|
||||
end
|
||||
|
||||
sync_gray #(
|
||||
.DATA_WIDTH(ADDRESS_WIDTH + 1)
|
||||
) i_waddr_sync (
|
||||
.in_clk(s_axis_aclk),
|
||||
.in_resetn(s_axis_aresetn),
|
||||
.out_clk(m_axis_aclk),
|
||||
.out_resetn(m_axis_aresetn),
|
||||
.in_count(_s_axis_waddr),
|
||||
.out_count(_m_axis_waddr)
|
||||
);
|
||||
|
||||
sync_gray #(
|
||||
.DATA_WIDTH(ADDRESS_WIDTH + 1)
|
||||
) i_raddr_sync (
|
||||
.in_clk(m_axis_aclk),
|
||||
.in_resetn(m_axis_aresetn),
|
||||
.out_clk(s_axis_aclk),
|
||||
.out_resetn(s_axis_aresetn),
|
||||
.in_count(_m_axis_raddr),
|
||||
.out_count(_s_axis_raddr)
|
||||
);
|
||||
|
||||
always @(posedge s_axis_aclk)
|
||||
begin
|
||||
if (s_axis_aresetn == 1'b0) begin
|
||||
s_axis_ready <= 1'b1;
|
||||
s_axis_empty <= 1'b1;
|
||||
s_axis_room <= 2**ADDRESS_WIDTH;
|
||||
end else begin
|
||||
s_axis_ready <= (_s_axis_raddr[ADDRESS_WIDTH] == _s_axis_waddr_next[ADDRESS_WIDTH] ||
|
||||
_s_axis_raddr[ADDRESS_WIDTH-1:0] != _s_axis_waddr_next[ADDRESS_WIDTH-1:0]);
|
||||
s_axis_empty <= _s_axis_raddr == _s_axis_waddr_next;
|
||||
s_axis_room <= _s_axis_raddr - _s_axis_waddr_next + 2**ADDRESS_WIDTH;
|
||||
end
|
||||
end
|
||||
|
||||
always @(posedge m_axis_aclk)
|
||||
begin
|
||||
if (m_axis_aresetn == 1'b0) begin
|
||||
m_axis_valid <= 1'b0;
|
||||
m_axis_level <= 'h00;
|
||||
end else begin
|
||||
m_axis_valid <= _m_axis_waddr != _m_axis_raddr_next;
|
||||
m_axis_level <= _m_axis_waddr - _m_axis_raddr_next;
|
||||
end
|
||||
end
|
||||
|
||||
endmodule
|
||||
|
||||
@@ -0,0 +1,108 @@
|
||||
// ***************************************************************************
|
||||
// ***************************************************************************
|
||||
// Copyright 2013(c) Analog Devices, Inc.
|
||||
// Author: Lars-Peter Clausen <lars@metafoo.de>
|
||||
//
|
||||
// All rights reserved.
|
||||
//
|
||||
// Redistribution and use in source and binary forms, with or without modification,
|
||||
// are permitted provided that the following conditions are met:
|
||||
// - Redistributions of source code must retain the above copyright
|
||||
// notice, this list of conditions and the following disclaimer.
|
||||
// - Redistributions in binary form must reproduce the above copyright
|
||||
// notice, this list of conditions and the following disclaimer in
|
||||
// the documentation and/or other materials provided with the
|
||||
// distribution.
|
||||
// - Neither the name of Analog Devices, Inc. nor the names of its
|
||||
// contributors may be used to endorse or promote products derived
|
||||
// from this software without specific prior written permission.
|
||||
// - The use of this software may or may not infringe the patent rights
|
||||
// of one or more patent holders. This license does not release you
|
||||
// from the requirement that you obtain separate licenses from these
|
||||
// patent holders to use this software.
|
||||
// - Use of the software either in source or binary form, must be run
|
||||
// on or directly connected to an Analog Devices Inc. component.
|
||||
//
|
||||
// THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
|
||||
// INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A
|
||||
// PARTICULAR PURPOSE ARE DISCLAIMED.
|
||||
//
|
||||
// IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
||||
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY
|
||||
// RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
|
||||
// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
|
||||
// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
// ***************************************************************************
|
||||
// ***************************************************************************
|
||||
|
||||
module fifo_address_sync (
|
||||
input clk,
|
||||
input resetn,
|
||||
|
||||
input m_axis_ready,
|
||||
output reg m_axis_valid,
|
||||
output reg [ADDRESS_WIDTH-1:0] m_axis_raddr,
|
||||
output [ADDRESS_WIDTH:0] m_axis_level,
|
||||
|
||||
output reg s_axis_ready,
|
||||
input s_axis_valid,
|
||||
output reg s_axis_empty,
|
||||
output reg [ADDRESS_WIDTH-1:0] s_axis_waddr,
|
||||
output [ADDRESS_WIDTH:0] s_axis_room
|
||||
);
|
||||
|
||||
parameter ADDRESS_WIDTH = 4;
|
||||
|
||||
reg [ADDRESS_WIDTH:0] room = 2**ADDRESS_WIDTH;
|
||||
reg [ADDRESS_WIDTH:0] level = 'h00;
|
||||
reg [ADDRESS_WIDTH:0] level_next;
|
||||
|
||||
assign s_axis_room = room;
|
||||
assign m_axis_level = level;
|
||||
|
||||
wire read = m_axis_ready & m_axis_valid;
|
||||
wire write = s_axis_ready & s_axis_valid;
|
||||
|
||||
always @(posedge clk)
|
||||
begin
|
||||
if (resetn == 1'b0) begin
|
||||
s_axis_waddr <= 'h00;
|
||||
m_axis_raddr <= 'h00;
|
||||
end else begin
|
||||
if (write)
|
||||
s_axis_waddr <= s_axis_waddr + 1'b1;
|
||||
if (read)
|
||||
m_axis_raddr <= m_axis_raddr + 1'b1;
|
||||
end
|
||||
end
|
||||
|
||||
always @(*)
|
||||
begin
|
||||
if (read & ~write)
|
||||
level_next <= level - 1'b1;
|
||||
else if (~read & write)
|
||||
level_next <= level + 1'b1;
|
||||
else
|
||||
level_next <= level;
|
||||
end
|
||||
|
||||
always @(posedge clk)
|
||||
begin
|
||||
if (resetn == 1'b0) begin
|
||||
m_axis_valid <= 1'b0;
|
||||
s_axis_ready <= 1'b0;
|
||||
level <= 'h00;
|
||||
room <= 2**ADDRESS_WIDTH;
|
||||
s_axis_empty <= 'h00;
|
||||
end else begin
|
||||
level <= level_next;
|
||||
room <= 2**ADDRESS_WIDTH - level_next;
|
||||
m_axis_valid <= level_next != 0;
|
||||
s_axis_ready <= level_next != 2**ADDRESS_WIDTH;
|
||||
s_axis_empty <= level_next == 0;
|
||||
end
|
||||
end
|
||||
|
||||
endmodule
|
||||
|
||||
@@ -0,0 +1,542 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<spirit:component xmlns:xilinx="http://www.xilinx.com" xmlns:spirit="http://www.spiritconsortium.org/XMLSchema/SPIRIT/1685-2009" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
|
||||
<spirit:vendor>analog.com</spirit:vendor>
|
||||
<spirit:library>user</spirit:library>
|
||||
<spirit:name>util_axis_fifo</spirit:name>
|
||||
<spirit:version>1.0</spirit:version>
|
||||
<spirit:busInterfaces>
|
||||
<spirit:busInterface>
|
||||
<spirit:name>S_AXIS</spirit:name>
|
||||
<spirit:busType spirit:vendor="xilinx.com" spirit:library="interface" spirit:name="axis" spirit:version="1.0"/>
|
||||
<spirit:abstractionType spirit:vendor="xilinx.com" spirit:library="interface" spirit:name="axis_rtl" spirit:version="1.0"/>
|
||||
<spirit:slave/>
|
||||
<spirit:portMaps>
|
||||
<spirit:portMap>
|
||||
<spirit:logicalPort>
|
||||
<spirit:name>TVALID</spirit:name>
|
||||
</spirit:logicalPort>
|
||||
<spirit:physicalPort>
|
||||
<spirit:name>s_axis_valid</spirit:name>
|
||||
</spirit:physicalPort>
|
||||
</spirit:portMap>
|
||||
<spirit:portMap>
|
||||
<spirit:logicalPort>
|
||||
<spirit:name>TREADY</spirit:name>
|
||||
</spirit:logicalPort>
|
||||
<spirit:physicalPort>
|
||||
<spirit:name>s_axis_ready</spirit:name>
|
||||
</spirit:physicalPort>
|
||||
</spirit:portMap>
|
||||
<spirit:portMap>
|
||||
<spirit:logicalPort>
|
||||
<spirit:name>TDATA</spirit:name>
|
||||
</spirit:logicalPort>
|
||||
<spirit:physicalPort>
|
||||
<spirit:name>s_axis_data</spirit:name>
|
||||
</spirit:physicalPort>
|
||||
</spirit:portMap>
|
||||
</spirit:portMaps>
|
||||
</spirit:busInterface>
|
||||
<spirit:busInterface>
|
||||
<spirit:name>M_AXIS</spirit:name>
|
||||
<spirit:busType spirit:vendor="xilinx.com" spirit:library="interface" spirit:name="axis" spirit:version="1.0"/>
|
||||
<spirit:abstractionType spirit:vendor="xilinx.com" spirit:library="interface" spirit:name="axis_rtl" spirit:version="1.0"/>
|
||||
<spirit:master/>
|
||||
<spirit:portMaps>
|
||||
<spirit:portMap>
|
||||
<spirit:logicalPort>
|
||||
<spirit:name>TVALID</spirit:name>
|
||||
</spirit:logicalPort>
|
||||
<spirit:physicalPort>
|
||||
<spirit:name>m_axis_valid</spirit:name>
|
||||
</spirit:physicalPort>
|
||||
</spirit:portMap>
|
||||
<spirit:portMap>
|
||||
<spirit:logicalPort>
|
||||
<spirit:name>TREADY</spirit:name>
|
||||
</spirit:logicalPort>
|
||||
<spirit:physicalPort>
|
||||
<spirit:name>m_axis_ready</spirit:name>
|
||||
</spirit:physicalPort>
|
||||
</spirit:portMap>
|
||||
<spirit:portMap>
|
||||
<spirit:logicalPort>
|
||||
<spirit:name>TDATA</spirit:name>
|
||||
</spirit:logicalPort>
|
||||
<spirit:physicalPort>
|
||||
<spirit:name>m_axis_data</spirit:name>
|
||||
</spirit:physicalPort>
|
||||
</spirit:portMap>
|
||||
</spirit:portMaps>
|
||||
</spirit:busInterface>
|
||||
<spirit:busInterface>
|
||||
<spirit:name>M_AXIS_signal_clock</spirit:name>
|
||||
<spirit:displayName>M_AXIS_signal_clock</spirit:displayName>
|
||||
<spirit:busType spirit:vendor="xilinx.com" spirit:library="signal" spirit:name="clock" spirit:version="1.0"/>
|
||||
<spirit:abstractionType spirit:vendor="xilinx.com" spirit:library="signal" spirit:name="clock_rtl" spirit:version="1.0"/>
|
||||
<spirit:slave/>
|
||||
<spirit:portMaps>
|
||||
<spirit:portMap>
|
||||
<spirit:logicalPort>
|
||||
<spirit:name>CLK</spirit:name>
|
||||
</spirit:logicalPort>
|
||||
<spirit:physicalPort>
|
||||
<spirit:name>m_axis_aclk</spirit:name>
|
||||
</spirit:physicalPort>
|
||||
</spirit:portMap>
|
||||
</spirit:portMaps>
|
||||
<spirit:parameters>
|
||||
<spirit:parameter>
|
||||
<spirit:name>ASSOCIATED_BUSIF</spirit:name>
|
||||
<spirit:value spirit:id="BUSIFPARAM_VALUE.M_AXIS_SIGNAL_CLOCK.ASSOCIATED_BUSIF">M_AXIS</spirit:value>
|
||||
</spirit:parameter>
|
||||
<spirit:parameter>
|
||||
<spirit:name>ASSOCIATED_RESET</spirit:name>
|
||||
<spirit:value spirit:id="BUSIFPARAM_VALUE.M_AXIS_SIGNAL_CLOCK.ASSOCIATED_RESET">m_axis_aresetn</spirit:value>
|
||||
</spirit:parameter>
|
||||
</spirit:parameters>
|
||||
</spirit:busInterface>
|
||||
<spirit:busInterface>
|
||||
<spirit:name>M_AXIS_signal_reset</spirit:name>
|
||||
<spirit:displayName>M_AXIS_signal_reset</spirit:displayName>
|
||||
<spirit:busType spirit:vendor="xilinx.com" spirit:library="signal" spirit:name="reset" spirit:version="1.0"/>
|
||||
<spirit:abstractionType spirit:vendor="xilinx.com" spirit:library="signal" spirit:name="reset_rtl" spirit:version="1.0"/>
|
||||
<spirit:slave/>
|
||||
<spirit:portMaps>
|
||||
<spirit:portMap>
|
||||
<spirit:logicalPort>
|
||||
<spirit:name>RST</spirit:name>
|
||||
</spirit:logicalPort>
|
||||
<spirit:physicalPort>
|
||||
<spirit:name>m_axis_aresetn</spirit:name>
|
||||
</spirit:physicalPort>
|
||||
</spirit:portMap>
|
||||
</spirit:portMaps>
|
||||
<spirit:parameters>
|
||||
<spirit:parameter>
|
||||
<spirit:name>POLARITY</spirit:name>
|
||||
<spirit:value spirit:id="BUSIFPARAM_VALUE.M_AXIS_SIGNAL_RESET.POLARITY">ACTIVE_LOW</spirit:value>
|
||||
</spirit:parameter>
|
||||
</spirit:parameters>
|
||||
</spirit:busInterface>
|
||||
<spirit:busInterface>
|
||||
<spirit:name>S_AXIS_signal_clock</spirit:name>
|
||||
<spirit:displayName>S_AXIS_signal_clock</spirit:displayName>
|
||||
<spirit:busType spirit:vendor="xilinx.com" spirit:library="signal" spirit:name="clock" spirit:version="1.0"/>
|
||||
<spirit:abstractionType spirit:vendor="xilinx.com" spirit:library="signal" spirit:name="clock_rtl" spirit:version="1.0"/>
|
||||
<spirit:slave/>
|
||||
<spirit:portMaps>
|
||||
<spirit:portMap>
|
||||
<spirit:logicalPort>
|
||||
<spirit:name>CLK</spirit:name>
|
||||
</spirit:logicalPort>
|
||||
<spirit:physicalPort>
|
||||
<spirit:name>s_axis_aclk</spirit:name>
|
||||
</spirit:physicalPort>
|
||||
</spirit:portMap>
|
||||
</spirit:portMaps>
|
||||
<spirit:parameters>
|
||||
<spirit:parameter>
|
||||
<spirit:name>ASSOCIATED_BUSIF</spirit:name>
|
||||
<spirit:value spirit:id="BUSIFPARAM_VALUE.S_AXIS_SIGNAL_CLOCK.ASSOCIATED_BUSIF">S_AXIS</spirit:value>
|
||||
</spirit:parameter>
|
||||
<spirit:parameter>
|
||||
<spirit:name>ASSOCIATED_RESET</spirit:name>
|
||||
<spirit:value spirit:id="BUSIFPARAM_VALUE.S_AXIS_SIGNAL_CLOCK.ASSOCIATED_RESET">m_axis_aresetn</spirit:value>
|
||||
</spirit:parameter>
|
||||
</spirit:parameters>
|
||||
</spirit:busInterface>
|
||||
<spirit:busInterface>
|
||||
<spirit:name>S_AXIS_signal_reset</spirit:name>
|
||||
<spirit:displayName>S_AXIS_signal_reset</spirit:displayName>
|
||||
<spirit:busType spirit:vendor="xilinx.com" spirit:library="signal" spirit:name="reset" spirit:version="1.0"/>
|
||||
<spirit:abstractionType spirit:vendor="xilinx.com" spirit:library="signal" spirit:name="reset_rtl" spirit:version="1.0"/>
|
||||
<spirit:slave/>
|
||||
<spirit:portMaps>
|
||||
<spirit:portMap>
|
||||
<spirit:logicalPort>
|
||||
<spirit:name>RST</spirit:name>
|
||||
</spirit:logicalPort>
|
||||
<spirit:physicalPort>
|
||||
<spirit:name>m_axis_aresetn</spirit:name>
|
||||
</spirit:physicalPort>
|
||||
</spirit:portMap>
|
||||
</spirit:portMaps>
|
||||
<spirit:parameters>
|
||||
<spirit:parameter>
|
||||
<spirit:name>POLARITY</spirit:name>
|
||||
<spirit:value spirit:id="BUSIFPARAM_VALUE.S_AXIS_SIGNAL_RESET.POLARITY">ACTIVE_LOW</spirit:value>
|
||||
</spirit:parameter>
|
||||
</spirit:parameters>
|
||||
</spirit:busInterface>
|
||||
</spirit:busInterfaces>
|
||||
<spirit:model>
|
||||
<spirit:views>
|
||||
<spirit:view>
|
||||
<spirit:name>xilinx_anylanguagesynthesis</spirit:name>
|
||||
<spirit:displayName>Synthesis</spirit:displayName>
|
||||
<spirit:envIdentifier>:vivado.xilinx.com:synthesis</spirit:envIdentifier>
|
||||
<spirit:language>Verilog</spirit:language>
|
||||
<spirit:modelName>util_axis_fifo</spirit:modelName>
|
||||
<spirit:fileSetRef>
|
||||
<spirit:localName>xilinx_anylanguagesynthesis_view_fileset</spirit:localName>
|
||||
</spirit:fileSetRef>
|
||||
</spirit:view>
|
||||
<spirit:view>
|
||||
<spirit:name>xilinx_anylanguagebehavioralsimulation</spirit:name>
|
||||
<spirit:displayName>Simulation</spirit:displayName>
|
||||
<spirit:envIdentifier>:vivado.xilinx.com:simulation</spirit:envIdentifier>
|
||||
<spirit:language>Verilog</spirit:language>
|
||||
<spirit:modelName>util_axis_fifo</spirit:modelName>
|
||||
<spirit:fileSetRef>
|
||||
<spirit:localName>xilinx_anylanguagebehavioralsimulation_view_fileset</spirit:localName>
|
||||
</spirit:fileSetRef>
|
||||
</spirit:view>
|
||||
<spirit:view>
|
||||
<spirit:name>xilinx_xpgui</spirit:name>
|
||||
<spirit:displayName>UI Layout</spirit:displayName>
|
||||
<spirit:envIdentifier>:vivado.xilinx.com:xgui.ui</spirit:envIdentifier>
|
||||
<spirit:fileSetRef>
|
||||
<spirit:localName>xilinx_xpgui_view_fileset</spirit:localName>
|
||||
</spirit:fileSetRef>
|
||||
</spirit:view>
|
||||
</spirit:views>
|
||||
<spirit:ports>
|
||||
<spirit:port>
|
||||
<spirit:name>m_axis_aclk</spirit:name>
|
||||
<spirit:wire>
|
||||
<spirit:direction>in</spirit:direction>
|
||||
<spirit:wireTypeDefs>
|
||||
<spirit:wireTypeDef>
|
||||
<spirit:typeName>std_logic</spirit:typeName>
|
||||
<spirit:viewNameRef>xilinx_anylanguagesynthesis</spirit:viewNameRef>
|
||||
<spirit:viewNameRef>xilinx_anylanguagebehavioralsimulation</spirit:viewNameRef>
|
||||
</spirit:wireTypeDef>
|
||||
</spirit:wireTypeDefs>
|
||||
</spirit:wire>
|
||||
</spirit:port>
|
||||
<spirit:port>
|
||||
<spirit:name>m_axis_aresetn</spirit:name>
|
||||
<spirit:wire>
|
||||
<spirit:direction>in</spirit:direction>
|
||||
<spirit:wireTypeDefs>
|
||||
<spirit:wireTypeDef>
|
||||
<spirit:typeName>std_logic</spirit:typeName>
|
||||
<spirit:viewNameRef>xilinx_anylanguagesynthesis</spirit:viewNameRef>
|
||||
<spirit:viewNameRef>xilinx_anylanguagebehavioralsimulation</spirit:viewNameRef>
|
||||
</spirit:wireTypeDef>
|
||||
</spirit:wireTypeDefs>
|
||||
</spirit:wire>
|
||||
</spirit:port>
|
||||
<spirit:port>
|
||||
<spirit:name>m_axis_ready</spirit:name>
|
||||
<spirit:wire>
|
||||
<spirit:direction>in</spirit:direction>
|
||||
<spirit:wireTypeDefs>
|
||||
<spirit:wireTypeDef>
|
||||
<spirit:typeName>std_logic</spirit:typeName>
|
||||
<spirit:viewNameRef>xilinx_anylanguagesynthesis</spirit:viewNameRef>
|
||||
<spirit:viewNameRef>xilinx_anylanguagebehavioralsimulation</spirit:viewNameRef>
|
||||
</spirit:wireTypeDef>
|
||||
</spirit:wireTypeDefs>
|
||||
</spirit:wire>
|
||||
</spirit:port>
|
||||
<spirit:port>
|
||||
<spirit:name>m_axis_valid</spirit:name>
|
||||
<spirit:wire>
|
||||
<spirit:direction>out</spirit:direction>
|
||||
<spirit:wireTypeDefs>
|
||||
<spirit:wireTypeDef>
|
||||
<spirit:typeName>std_logic</spirit:typeName>
|
||||
<spirit:viewNameRef>xilinx_anylanguagesynthesis</spirit:viewNameRef>
|
||||
<spirit:viewNameRef>xilinx_anylanguagebehavioralsimulation</spirit:viewNameRef>
|
||||
</spirit:wireTypeDef>
|
||||
</spirit:wireTypeDefs>
|
||||
</spirit:wire>
|
||||
</spirit:port>
|
||||
<spirit:port>
|
||||
<spirit:name>m_axis_data</spirit:name>
|
||||
<spirit:wire>
|
||||
<spirit:direction>out</spirit:direction>
|
||||
<spirit:vector>
|
||||
<spirit:left spirit:format="long" spirit:resolve="dependent" spirit:dependency="(spirit:decode(id('MODELPARAM_VALUE.DATA_WIDTH')) - 1)">63</spirit:left>
|
||||
<spirit:right spirit:format="long">0</spirit:right>
|
||||
</spirit:vector>
|
||||
<spirit:wireTypeDefs>
|
||||
<spirit:wireTypeDef>
|
||||
<spirit:typeName>std_logic_vector</spirit:typeName>
|
||||
<spirit:viewNameRef>xilinx_anylanguagesynthesis</spirit:viewNameRef>
|
||||
<spirit:viewNameRef>xilinx_anylanguagebehavioralsimulation</spirit:viewNameRef>
|
||||
</spirit:wireTypeDef>
|
||||
</spirit:wireTypeDefs>
|
||||
</spirit:wire>
|
||||
</spirit:port>
|
||||
<spirit:port>
|
||||
<spirit:name>m_axis_level</spirit:name>
|
||||
<spirit:wire>
|
||||
<spirit:direction>out</spirit:direction>
|
||||
<spirit:vector>
|
||||
<spirit:left spirit:format="long" spirit:resolve="dependent" spirit:dependency="spirit:decode(id('MODELPARAM_VALUE.ADDRESS_WIDTH'))">4</spirit:left>
|
||||
<spirit:right spirit:format="long">0</spirit:right>
|
||||
</spirit:vector>
|
||||
<spirit:wireTypeDefs>
|
||||
<spirit:wireTypeDef>
|
||||
<spirit:typeName>std_logic_vector</spirit:typeName>
|
||||
<spirit:viewNameRef>xilinx_anylanguagesynthesis</spirit:viewNameRef>
|
||||
<spirit:viewNameRef>xilinx_anylanguagebehavioralsimulation</spirit:viewNameRef>
|
||||
</spirit:wireTypeDef>
|
||||
</spirit:wireTypeDefs>
|
||||
</spirit:wire>
|
||||
</spirit:port>
|
||||
<spirit:port>
|
||||
<spirit:name>s_axis_aclk</spirit:name>
|
||||
<spirit:wire>
|
||||
<spirit:direction>in</spirit:direction>
|
||||
<spirit:wireTypeDefs>
|
||||
<spirit:wireTypeDef>
|
||||
<spirit:typeName>std_logic</spirit:typeName>
|
||||
<spirit:viewNameRef>xilinx_anylanguagesynthesis</spirit:viewNameRef>
|
||||
<spirit:viewNameRef>xilinx_anylanguagebehavioralsimulation</spirit:viewNameRef>
|
||||
</spirit:wireTypeDef>
|
||||
</spirit:wireTypeDefs>
|
||||
</spirit:wire>
|
||||
</spirit:port>
|
||||
<spirit:port>
|
||||
<spirit:name>s_axis_aresetn</spirit:name>
|
||||
<spirit:wire>
|
||||
<spirit:direction>in</spirit:direction>
|
||||
<spirit:wireTypeDefs>
|
||||
<spirit:wireTypeDef>
|
||||
<spirit:typeName>std_logic</spirit:typeName>
|
||||
<spirit:viewNameRef>xilinx_anylanguagesynthesis</spirit:viewNameRef>
|
||||
<spirit:viewNameRef>xilinx_anylanguagebehavioralsimulation</spirit:viewNameRef>
|
||||
</spirit:wireTypeDef>
|
||||
</spirit:wireTypeDefs>
|
||||
</spirit:wire>
|
||||
</spirit:port>
|
||||
<spirit:port>
|
||||
<spirit:name>s_axis_ready</spirit:name>
|
||||
<spirit:wire>
|
||||
<spirit:direction>out</spirit:direction>
|
||||
<spirit:wireTypeDefs>
|
||||
<spirit:wireTypeDef>
|
||||
<spirit:typeName>std_logic</spirit:typeName>
|
||||
<spirit:viewNameRef>xilinx_anylanguagesynthesis</spirit:viewNameRef>
|
||||
<spirit:viewNameRef>xilinx_anylanguagebehavioralsimulation</spirit:viewNameRef>
|
||||
</spirit:wireTypeDef>
|
||||
</spirit:wireTypeDefs>
|
||||
</spirit:wire>
|
||||
</spirit:port>
|
||||
<spirit:port>
|
||||
<spirit:name>s_axis_valid</spirit:name>
|
||||
<spirit:wire>
|
||||
<spirit:direction>in</spirit:direction>
|
||||
<spirit:wireTypeDefs>
|
||||
<spirit:wireTypeDef>
|
||||
<spirit:typeName>std_logic</spirit:typeName>
|
||||
<spirit:viewNameRef>xilinx_anylanguagesynthesis</spirit:viewNameRef>
|
||||
<spirit:viewNameRef>xilinx_anylanguagebehavioralsimulation</spirit:viewNameRef>
|
||||
</spirit:wireTypeDef>
|
||||
</spirit:wireTypeDefs>
|
||||
</spirit:wire>
|
||||
</spirit:port>
|
||||
<spirit:port>
|
||||
<spirit:name>s_axis_data</spirit:name>
|
||||
<spirit:wire>
|
||||
<spirit:direction>in</spirit:direction>
|
||||
<spirit:vector>
|
||||
<spirit:left spirit:format="long" spirit:resolve="dependent" spirit:dependency="(spirit:decode(id('MODELPARAM_VALUE.DATA_WIDTH')) - 1)">63</spirit:left>
|
||||
<spirit:right spirit:format="long">0</spirit:right>
|
||||
</spirit:vector>
|
||||
<spirit:wireTypeDefs>
|
||||
<spirit:wireTypeDef>
|
||||
<spirit:typeName>std_logic_vector</spirit:typeName>
|
||||
<spirit:viewNameRef>xilinx_anylanguagesynthesis</spirit:viewNameRef>
|
||||
<spirit:viewNameRef>xilinx_anylanguagebehavioralsimulation</spirit:viewNameRef>
|
||||
</spirit:wireTypeDef>
|
||||
</spirit:wireTypeDefs>
|
||||
<spirit:driver>
|
||||
<spirit:defaultValue spirit:format="long">0</spirit:defaultValue>
|
||||
</spirit:driver>
|
||||
</spirit:wire>
|
||||
</spirit:port>
|
||||
<spirit:port>
|
||||
<spirit:name>s_axis_empty</spirit:name>
|
||||
<spirit:wire>
|
||||
<spirit:direction>out</spirit:direction>
|
||||
<spirit:wireTypeDefs>
|
||||
<spirit:wireTypeDef>
|
||||
<spirit:typeName>std_logic</spirit:typeName>
|
||||
<spirit:viewNameRef>xilinx_anylanguagesynthesis</spirit:viewNameRef>
|
||||
<spirit:viewNameRef>xilinx_anylanguagebehavioralsimulation</spirit:viewNameRef>
|
||||
</spirit:wireTypeDef>
|
||||
</spirit:wireTypeDefs>
|
||||
</spirit:wire>
|
||||
</spirit:port>
|
||||
<spirit:port>
|
||||
<spirit:name>s_axis_room</spirit:name>
|
||||
<spirit:wire>
|
||||
<spirit:direction>out</spirit:direction>
|
||||
<spirit:vector>
|
||||
<spirit:left spirit:format="long" spirit:resolve="dependent" spirit:dependency="spirit:decode(id('MODELPARAM_VALUE.ADDRESS_WIDTH'))">4</spirit:left>
|
||||
<spirit:right spirit:format="long">0</spirit:right>
|
||||
</spirit:vector>
|
||||
<spirit:wireTypeDefs>
|
||||
<spirit:wireTypeDef>
|
||||
<spirit:typeName>std_logic_vector</spirit:typeName>
|
||||
<spirit:viewNameRef>xilinx_anylanguagesynthesis</spirit:viewNameRef>
|
||||
<spirit:viewNameRef>xilinx_anylanguagebehavioralsimulation</spirit:viewNameRef>
|
||||
</spirit:wireTypeDef>
|
||||
</spirit:wireTypeDefs>
|
||||
</spirit:wire>
|
||||
</spirit:port>
|
||||
</spirit:ports>
|
||||
<spirit:modelParameters>
|
||||
<spirit:modelParameter xsi:type="spirit:nameValueTypeType" spirit:dataType="integer">
|
||||
<spirit:name>DATA_WIDTH</spirit:name>
|
||||
<spirit:displayName>Data Width</spirit:displayName>
|
||||
<spirit:value spirit:format="long" spirit:resolve="generated" spirit:id="MODELPARAM_VALUE.DATA_WIDTH">64</spirit:value>
|
||||
</spirit:modelParameter>
|
||||
<spirit:modelParameter spirit:dataType="integer">
|
||||
<spirit:name>ASYNC_CLK</spirit:name>
|
||||
<spirit:displayName>Async Clk</spirit:displayName>
|
||||
<spirit:value spirit:format="long" spirit:resolve="generated" spirit:id="MODELPARAM_VALUE.ASYNC_CLK">1</spirit:value>
|
||||
</spirit:modelParameter>
|
||||
<spirit:modelParameter spirit:dataType="integer">
|
||||
<spirit:name>ADDRESS_WIDTH</spirit:name>
|
||||
<spirit:displayName>Address Width</spirit:displayName>
|
||||
<spirit:value spirit:format="long" spirit:resolve="generated" spirit:id="MODELPARAM_VALUE.ADDRESS_WIDTH">4</spirit:value>
|
||||
</spirit:modelParameter>
|
||||
<spirit:modelParameter spirit:dataType="integer">
|
||||
<spirit:name>S_AXIS_REGISTERED</spirit:name>
|
||||
<spirit:displayName>S Axis Registered</spirit:displayName>
|
||||
<spirit:value spirit:format="long" spirit:resolve="generated" spirit:id="MODELPARAM_VALUE.S_AXIS_REGISTERED">1</spirit:value>
|
||||
</spirit:modelParameter>
|
||||
</spirit:modelParameters>
|
||||
</spirit:model>
|
||||
<spirit:fileSets>
|
||||
<spirit:fileSet>
|
||||
<spirit:name>xilinx_anylanguagesynthesis_view_fileset</spirit:name>
|
||||
<spirit:file>
|
||||
<spirit:name>sync_gray.v</spirit:name>
|
||||
<spirit:fileType>verilogSource</spirit:fileType>
|
||||
</spirit:file>
|
||||
<spirit:file>
|
||||
<spirit:name>sync_bits.v</spirit:name>
|
||||
<spirit:fileType>verilogSource</spirit:fileType>
|
||||
</spirit:file>
|
||||
<spirit:file>
|
||||
<spirit:name>address_gray_pipelined.v</spirit:name>
|
||||
<spirit:fileType>verilogSource</spirit:fileType>
|
||||
</spirit:file>
|
||||
<spirit:file>
|
||||
<spirit:name>address_sync.v</spirit:name>
|
||||
<spirit:fileType>verilogSource</spirit:fileType>
|
||||
</spirit:file>
|
||||
<spirit:file>
|
||||
<spirit:name>util_axis_fifo.v</spirit:name>
|
||||
<spirit:fileType>verilogSource</spirit:fileType>
|
||||
<spirit:userFileType>CHECKSUM_239993f9</spirit:userFileType>
|
||||
</spirit:file>
|
||||
</spirit:fileSet>
|
||||
<spirit:fileSet>
|
||||
<spirit:name>xilinx_anylanguagebehavioralsimulation_view_fileset</spirit:name>
|
||||
<spirit:file>
|
||||
<spirit:name>sync_gray.v</spirit:name>
|
||||
<spirit:fileType>verilogSource</spirit:fileType>
|
||||
<spirit:userFileType>USED_IN_ipstatic</spirit:userFileType>
|
||||
</spirit:file>
|
||||
<spirit:file>
|
||||
<spirit:name>sync_bits.v</spirit:name>
|
||||
<spirit:fileType>verilogSource</spirit:fileType>
|
||||
<spirit:userFileType>USED_IN_ipstatic</spirit:userFileType>
|
||||
</spirit:file>
|
||||
<spirit:file>
|
||||
<spirit:name>address_gray_pipelined.v</spirit:name>
|
||||
<spirit:fileType>verilogSource</spirit:fileType>
|
||||
<spirit:userFileType>USED_IN_ipstatic</spirit:userFileType>
|
||||
</spirit:file>
|
||||
<spirit:file>
|
||||
<spirit:name>address_sync.v</spirit:name>
|
||||
<spirit:fileType>verilogSource</spirit:fileType>
|
||||
<spirit:userFileType>USED_IN_ipstatic</spirit:userFileType>
|
||||
</spirit:file>
|
||||
<spirit:file>
|
||||
<spirit:name>util_axis_fifo.v</spirit:name>
|
||||
<spirit:fileType>verilogSource</spirit:fileType>
|
||||
<spirit:userFileType>USED_IN_ipstatic</spirit:userFileType>
|
||||
</spirit:file>
|
||||
</spirit:fileSet>
|
||||
<spirit:fileSet>
|
||||
<spirit:name>xilinx_xpgui_view_fileset</spirit:name>
|
||||
<spirit:file>
|
||||
<spirit:name>xgui/util_axis_fifo_v1_0.tcl</spirit:name>
|
||||
<spirit:fileType>tclSource</spirit:fileType>
|
||||
<spirit:userFileType>CHECKSUM_13c68e4c</spirit:userFileType>
|
||||
<spirit:userFileType>XGUI_VERSION_2</spirit:userFileType>
|
||||
</spirit:file>
|
||||
</spirit:fileSet>
|
||||
</spirit:fileSets>
|
||||
<spirit:description>util_axis_fifo_v1_0</spirit:description>
|
||||
<spirit:parameters>
|
||||
<spirit:parameter>
|
||||
<spirit:name>DATA_WIDTH</spirit:name>
|
||||
<spirit:displayName>Data Width</spirit:displayName>
|
||||
<spirit:value spirit:format="long" spirit:resolve="user" spirit:id="PARAM_VALUE.DATA_WIDTH">64</spirit:value>
|
||||
</spirit:parameter>
|
||||
<spirit:parameter>
|
||||
<spirit:name>ASYNC_CLK</spirit:name>
|
||||
<spirit:displayName>Async Clk</spirit:displayName>
|
||||
<spirit:value spirit:format="long" spirit:resolve="user" spirit:id="PARAM_VALUE.ASYNC_CLK">1</spirit:value>
|
||||
</spirit:parameter>
|
||||
<spirit:parameter>
|
||||
<spirit:name>ADDRESS_WIDTH</spirit:name>
|
||||
<spirit:displayName>Address Width</spirit:displayName>
|
||||
<spirit:value spirit:format="long" spirit:resolve="user" spirit:id="PARAM_VALUE.ADDRESS_WIDTH">4</spirit:value>
|
||||
</spirit:parameter>
|
||||
<spirit:parameter>
|
||||
<spirit:name>S_AXIS_REGISTERED</spirit:name>
|
||||
<spirit:displayName>S Axis Registered</spirit:displayName>
|
||||
<spirit:value spirit:format="long" spirit:resolve="user" spirit:id="PARAM_VALUE.S_AXIS_REGISTERED">1</spirit:value>
|
||||
</spirit:parameter>
|
||||
<spirit:parameter>
|
||||
<spirit:name>Component_Name</spirit:name>
|
||||
<spirit:value spirit:resolve="user" spirit:id="PARAM_VALUE.Component_Name" spirit:order="1">util_axis_fifo_v1_0</spirit:value>
|
||||
</spirit:parameter>
|
||||
</spirit:parameters>
|
||||
<spirit:vendorExtensions>
|
||||
<xilinx:coreExtensions>
|
||||
<xilinx:supportedFamilies>
|
||||
<xilinx:family xilinx:lifeCycle="Production">virtex7</xilinx:family>
|
||||
<xilinx:family xilinx:lifeCycle="Production">qvirtex7</xilinx:family>
|
||||
<xilinx:family xilinx:lifeCycle="Production">kintex7</xilinx:family>
|
||||
<xilinx:family xilinx:lifeCycle="Production">kintex7l</xilinx:family>
|
||||
<xilinx:family xilinx:lifeCycle="Production">qkintex7</xilinx:family>
|
||||
<xilinx:family xilinx:lifeCycle="Production">qkintex7l</xilinx:family>
|
||||
<xilinx:family xilinx:lifeCycle="Production">artix7</xilinx:family>
|
||||
<xilinx:family xilinx:lifeCycle="Production">artix7l</xilinx:family>
|
||||
<xilinx:family xilinx:lifeCycle="Production">aartix7</xilinx:family>
|
||||
<xilinx:family xilinx:lifeCycle="Production">qartix7</xilinx:family>
|
||||
<xilinx:family xilinx:lifeCycle="Production">zynq</xilinx:family>
|
||||
<xilinx:family xilinx:lifeCycle="Production">qzynq</xilinx:family>
|
||||
<xilinx:family xilinx:lifeCycle="Production">azynq</xilinx:family>
|
||||
<xilinx:family xilinx:lifeCycle="Production">virtexu</xilinx:family>
|
||||
<xilinx:family xilinx:lifeCycle="Production">kintexuplus</xilinx:family>
|
||||
<xilinx:family xilinx:lifeCycle="Production">zynquplus</xilinx:family>
|
||||
<xilinx:family xilinx:lifeCycle="Production">kintexu</xilinx:family>
|
||||
<xilinx:family xilinx:lifeCycle="Beta">virtexuplus</xilinx:family>
|
||||
</xilinx:supportedFamilies>
|
||||
<xilinx:taxonomies>
|
||||
<xilinx:taxonomy>/Analog_Devices</xilinx:taxonomy>
|
||||
</xilinx:taxonomies>
|
||||
<xilinx:displayName>util_axis_fifo_v1_0</xilinx:displayName>
|
||||
<xilinx:vendorDisplayName>Analog Devices</xilinx:vendorDisplayName>
|
||||
<xilinx:vendorURL>http://www.analog.com</xilinx:vendorURL>
|
||||
<xilinx:coreRevision>1</xilinx:coreRevision>
|
||||
<xilinx:coreCreationDateTime>2017-04-20T23:50:31Z</xilinx:coreCreationDateTime>
|
||||
</xilinx:coreExtensions>
|
||||
<xilinx:packagingInfo>
|
||||
<xilinx:xilinxVersion>2015.4</xilinx:xilinxVersion>
|
||||
</xilinx:packagingInfo>
|
||||
</spirit:vendorExtensions>
|
||||
</spirit:component>
|
||||
@@ -0,0 +1,76 @@
|
||||
// ***************************************************************************
|
||||
// ***************************************************************************
|
||||
// Copyright 2013(c) Analog Devices, Inc.
|
||||
// Author: Lars-Peter Clausen <lars@metafoo.de>
|
||||
//
|
||||
// All rights reserved.
|
||||
//
|
||||
// Redistribution and use in source and binary forms, with or without modification,
|
||||
// are permitted provided that the following conditions are met:
|
||||
// - Redistributions of source code must retain the above copyright
|
||||
// notice, this list of conditions and the following disclaimer.
|
||||
// - Redistributions in binary form must reproduce the above copyright
|
||||
// notice, this list of conditions and the following disclaimer in
|
||||
// the documentation and/or other materials provided with the
|
||||
// distribution.
|
||||
// - Neither the name of Analog Devices, Inc. nor the names of its
|
||||
// contributors may be used to endorse or promote products derived
|
||||
// from this software without specific prior written permission.
|
||||
// - The use of this software may or may not infringe the patent rights
|
||||
// of one or more patent holders. This license does not release you
|
||||
// from the requirement that you obtain separate licenses from these
|
||||
// patent holders to use this software.
|
||||
// - Use of the software either in source or binary form, must be run
|
||||
// on or directly connected to an Analog Devices Inc. component.
|
||||
//
|
||||
// THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
|
||||
// INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A
|
||||
// PARTICULAR PURPOSE ARE DISCLAIMED.
|
||||
//
|
||||
// IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
||||
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY
|
||||
// RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
|
||||
// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
|
||||
// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
// ***************************************************************************
|
||||
// ***************************************************************************
|
||||
|
||||
/*
|
||||
* Helper module for synchronizing bit signals from one clock domain to another.
|
||||
* It uses the standard approach of 2 FF in series.
|
||||
* Note, that while the module allows to synchronize multiple bits at once it is
|
||||
* only able to synchronize multi-bit signals where at max one bit changes per
|
||||
* clock cycle (e.g. a gray counter).
|
||||
*/
|
||||
module sync_bits
|
||||
(
|
||||
input [NUM_OF_BITS-1:0] in,
|
||||
input out_resetn,
|
||||
input out_clk,
|
||||
output [NUM_OF_BITS-1:0] out
|
||||
);
|
||||
|
||||
// Number of bits to synchronize
|
||||
parameter NUM_OF_BITS = 1;
|
||||
// Whether input and output clocks are asynchronous, if 0 the synchronizer will
|
||||
// be bypassed and the output signal equals the input signal.
|
||||
parameter ASYNC_CLK = 1;
|
||||
|
||||
reg [NUM_OF_BITS-1:0] cdc_sync_stage1 = 'h0;
|
||||
reg [NUM_OF_BITS-1:0] cdc_sync_stage2 = 'h0;
|
||||
|
||||
always @(posedge out_clk)
|
||||
begin
|
||||
if (out_resetn == 1'b0) begin
|
||||
cdc_sync_stage1 <= 'b0;
|
||||
cdc_sync_stage2 <= 'b0;
|
||||
end else begin
|
||||
cdc_sync_stage1 <= in;
|
||||
cdc_sync_stage2 <= cdc_sync_stage1;
|
||||
end
|
||||
end
|
||||
|
||||
assign out = ASYNC_CLK ? cdc_sync_stage2 : in;
|
||||
|
||||
endmodule
|
||||
@@ -0,0 +1,111 @@
|
||||
// ***************************************************************************
|
||||
// ***************************************************************************
|
||||
// Copyright 2013(c) Analog Devices, Inc.
|
||||
// Author: Lars-Peter Clausen <lars@metafoo.de>
|
||||
//
|
||||
// All rights reserved.
|
||||
//
|
||||
// Redistribution and use in source and binary forms, with or without modification,
|
||||
// are permitted provided that the following conditions are met:
|
||||
// - Redistributions of source code must retain the above copyright
|
||||
// notice, this list of conditions and the following disclaimer.
|
||||
// - Redistributions in binary form must reproduce the above copyright
|
||||
// notice, this list of conditions and the following disclaimer in
|
||||
// the documentation and/or other materials provided with the
|
||||
// distribution.
|
||||
// - Neither the name of Analog Devices, Inc. nor the names of its
|
||||
// contributors may be used to endorse or promote products derived
|
||||
// from this software without specific prior written permission.
|
||||
// - The use of this software may or may not infringe the patent rights
|
||||
// of one or more patent holders. This license does not release you
|
||||
// from the requirement that you obtain separate licenses from these
|
||||
// patent holders to use this software.
|
||||
// - Use of the software either in source or binary form, must be run
|
||||
// on or directly connected to an Analog Devices Inc. component.
|
||||
//
|
||||
// THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
|
||||
// INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A
|
||||
// PARTICULAR PURPOSE ARE DISCLAIMED.
|
||||
//
|
||||
// IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
||||
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY
|
||||
// RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
|
||||
// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
|
||||
// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
// ***************************************************************************
|
||||
// ***************************************************************************
|
||||
|
||||
/*
|
||||
* Helper module for synchronizing a counter from one clock domain to another
|
||||
* using gray code. To work correctly the counter must not change its value by
|
||||
* more than one in one clock cycle in the source domain. I.e. the value may
|
||||
* change by either -1, 0 or +1.
|
||||
*/
|
||||
module sync_gray (
|
||||
input in_clk,
|
||||
input in_resetn,
|
||||
input [DATA_WIDTH-1:0] in_count,
|
||||
input out_resetn,
|
||||
input out_clk,
|
||||
output [DATA_WIDTH-1:0] out_count
|
||||
);
|
||||
|
||||
// Bit-width of the counter
|
||||
parameter DATA_WIDTH = 1;
|
||||
// Whether the input and output clock are asynchronous, if set to 0 the
|
||||
// synchronizer will be bypassed and out_count will be in_count.
|
||||
parameter ASYNC_CLK = 1;
|
||||
|
||||
reg [DATA_WIDTH-1:0] cdc_sync_stage0 = 'h0;
|
||||
reg [DATA_WIDTH-1:0] cdc_sync_stage1 = 'h0;
|
||||
reg [DATA_WIDTH-1:0] cdc_sync_stage2 = 'h0;
|
||||
reg [DATA_WIDTH-1:0] out_count_m = 'h0;
|
||||
|
||||
function [DATA_WIDTH-1:0] g2b;
|
||||
input [DATA_WIDTH-1:0] g;
|
||||
reg [DATA_WIDTH-1:0] b;
|
||||
integer i;
|
||||
begin
|
||||
b[DATA_WIDTH-1] = g[DATA_WIDTH-1];
|
||||
for (i = DATA_WIDTH - 2; i >= 0; i = i - 1)
|
||||
b[i] = b[i + 1] ^ g[i];
|
||||
g2b = b;
|
||||
end
|
||||
endfunction
|
||||
|
||||
function [DATA_WIDTH-1:0] b2g;
|
||||
input [DATA_WIDTH-1:0] b;
|
||||
reg [DATA_WIDTH-1:0] g;
|
||||
integer i;
|
||||
begin
|
||||
g[DATA_WIDTH-1] = b[DATA_WIDTH-1];
|
||||
for (i = DATA_WIDTH - 2; i >= 0; i = i -1)
|
||||
g[i] = b[i + 1] ^ b[i];
|
||||
b2g = g;
|
||||
end
|
||||
endfunction
|
||||
|
||||
always @(posedge in_clk) begin
|
||||
if (in_resetn == 1'b0) begin
|
||||
cdc_sync_stage0 <= 'h00;
|
||||
end else begin
|
||||
cdc_sync_stage0 <= b2g(in_count);
|
||||
end
|
||||
end
|
||||
|
||||
always @(posedge out_clk) begin
|
||||
if (out_resetn == 1'b0) begin
|
||||
cdc_sync_stage1 <= 'h00;
|
||||
cdc_sync_stage2 <= 'h00;
|
||||
out_count_m <= 'h00;
|
||||
end else begin
|
||||
cdc_sync_stage1 <= cdc_sync_stage0;
|
||||
cdc_sync_stage2 <= cdc_sync_stage1;
|
||||
out_count_m <= g2b(cdc_sync_stage2);
|
||||
end
|
||||
end
|
||||
|
||||
assign out_count = ASYNC_CLK ? out_count_m : in_count;
|
||||
|
||||
endmodule
|
||||
@@ -0,0 +1,215 @@
|
||||
// ***************************************************************************
|
||||
// ***************************************************************************
|
||||
// Copyright 2013(c) Analog Devices, Inc.
|
||||
// Author: Lars-Peter Clausen <lars@metafoo.de>
|
||||
//
|
||||
// All rights reserved.
|
||||
//
|
||||
// Redistribution and use in source and binary forms, with or without modification,
|
||||
// are permitted provided that the following conditions are met:
|
||||
// - Redistributions of source code must retain the above copyright
|
||||
// notice, this list of conditions and the following disclaimer.
|
||||
// - Redistributions in binary form must reproduce the above copyright
|
||||
// notice, this list of conditions and the following disclaimer in
|
||||
// the documentation and/or other materials provided with the
|
||||
// distribution.
|
||||
// - Neither the name of Analog Devices, Inc. nor the names of its
|
||||
// contributors may be used to endorse or promote products derived
|
||||
// from this software without specific prior written permission.
|
||||
// - The use of this software may or may not infringe the patent rights
|
||||
// of one or more patent holders. This license does not release you
|
||||
// from the requirement that you obtain separate licenses from these
|
||||
// patent holders to use this software.
|
||||
// - Use of the software either in source or binary form, must be run
|
||||
// on or directly connected to an Analog Devices Inc. component.
|
||||
//
|
||||
// THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
|
||||
// INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A
|
||||
// PARTICULAR PURPOSE ARE DISCLAIMED.
|
||||
//
|
||||
// IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
||||
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY
|
||||
// RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
|
||||
// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||||
// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
|
||||
// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
// ***************************************************************************
|
||||
// ***************************************************************************
|
||||
// Source: git://github.com/analogdevicesinc/hdl.git
|
||||
// Commit hash: 04843795d8d6a496c00ee91b437d57924bc1cbf1
|
||||
|
||||
module util_axis_fifo (
|
||||
input m_axis_aclk,
|
||||
input m_axis_aresetn,
|
||||
input m_axis_ready,
|
||||
output m_axis_valid,
|
||||
output [DATA_WIDTH-1:0] m_axis_data,
|
||||
output [ADDRESS_WIDTH:0] m_axis_level,
|
||||
|
||||
input s_axis_aclk,
|
||||
input s_axis_aresetn,
|
||||
output s_axis_ready,
|
||||
input s_axis_valid,
|
||||
input [DATA_WIDTH-1:0] s_axis_data,
|
||||
output s_axis_empty,
|
||||
output [ADDRESS_WIDTH:0] s_axis_room
|
||||
);
|
||||
|
||||
parameter DATA_WIDTH = 64;
|
||||
parameter ASYNC_CLK = 1;
|
||||
parameter ADDRESS_WIDTH = 4;
|
||||
parameter S_AXIS_REGISTERED = 1;
|
||||
|
||||
generate if (ADDRESS_WIDTH == 0) begin
|
||||
|
||||
reg [DATA_WIDTH-1:0] cdc_sync_fifo_ram;
|
||||
reg s_axis_waddr = 1'b0;
|
||||
reg m_axis_raddr = 1'b0;
|
||||
|
||||
wire m_axis_waddr;
|
||||
wire s_axis_raddr;
|
||||
|
||||
sync_bits #(
|
||||
.NUM_OF_BITS(1),
|
||||
.ASYNC_CLK(ASYNC_CLK)
|
||||
) i_waddr_sync (
|
||||
.out_clk(m_axis_aclk),
|
||||
.out_resetn(m_axis_aresetn),
|
||||
.in(s_axis_waddr),
|
||||
.out(m_axis_waddr)
|
||||
);
|
||||
|
||||
sync_bits #(
|
||||
.NUM_OF_BITS(1),
|
||||
.ASYNC_CLK(ASYNC_CLK)
|
||||
) i_raddr_sync (
|
||||
.out_clk(s_axis_aclk),
|
||||
.out_resetn(s_axis_aresetn),
|
||||
.in(m_axis_raddr),
|
||||
.out(s_axis_raddr)
|
||||
);
|
||||
|
||||
assign m_axis_valid = m_axis_raddr != m_axis_waddr;
|
||||
assign m_axis_level = m_axis_valid;
|
||||
assign s_axis_ready = s_axis_raddr == s_axis_waddr;
|
||||
assign s_axis_empty = s_axis_ready;
|
||||
assign s_axis_room = s_axis_ready;
|
||||
|
||||
always @(posedge s_axis_aclk) begin
|
||||
if (s_axis_ready)
|
||||
cdc_sync_fifo_ram <= s_axis_data;
|
||||
end
|
||||
|
||||
always @(posedge s_axis_aclk) begin
|
||||
if (s_axis_aresetn == 1'b0) begin
|
||||
s_axis_waddr <= 1'b0;
|
||||
end else begin
|
||||
if (s_axis_ready & s_axis_valid) begin
|
||||
s_axis_waddr <= s_axis_waddr + 1'b1;
|
||||
end
|
||||
end
|
||||
end
|
||||
|
||||
always @(posedge m_axis_aclk) begin
|
||||
if (m_axis_aresetn == 1'b0) begin
|
||||
m_axis_raddr <= 1'b0;
|
||||
end else begin
|
||||
if (m_axis_valid & m_axis_ready)
|
||||
m_axis_raddr <= m_axis_raddr + 1'b1;
|
||||
end
|
||||
end
|
||||
|
||||
assign m_axis_data = cdc_sync_fifo_ram;
|
||||
|
||||
end else begin
|
||||
|
||||
reg [DATA_WIDTH-1:0] ram[0:2**ADDRESS_WIDTH-1];
|
||||
|
||||
wire [ADDRESS_WIDTH-1:0] s_axis_waddr;
|
||||
wire [ADDRESS_WIDTH-1:0] m_axis_raddr;
|
||||
wire _m_axis_ready;
|
||||
wire _m_axis_valid;
|
||||
|
||||
if (ASYNC_CLK == 1) begin
|
||||
|
||||
fifo_address_gray_pipelined #(
|
||||
.ADDRESS_WIDTH(ADDRESS_WIDTH)
|
||||
) i_address_gray (
|
||||
.m_axis_aclk(m_axis_aclk),
|
||||
.m_axis_aresetn(m_axis_aresetn),
|
||||
.m_axis_ready(_m_axis_ready),
|
||||
.m_axis_valid(_m_axis_valid),
|
||||
.m_axis_raddr(m_axis_raddr),
|
||||
.m_axis_level(m_axis_level),
|
||||
|
||||
.s_axis_aclk(s_axis_aclk),
|
||||
.s_axis_aresetn(s_axis_aresetn),
|
||||
.s_axis_ready(s_axis_ready),
|
||||
.s_axis_valid(s_axis_valid),
|
||||
.s_axis_empty(s_axis_empty),
|
||||
.s_axis_waddr(s_axis_waddr),
|
||||
.s_axis_room(s_axis_room)
|
||||
);
|
||||
|
||||
end else begin
|
||||
|
||||
fifo_address_sync #(
|
||||
.ADDRESS_WIDTH(ADDRESS_WIDTH)
|
||||
) i_address_sync (
|
||||
.clk(m_axis_aclk),
|
||||
.resetn(m_axis_aresetn),
|
||||
.m_axis_ready(_m_axis_ready),
|
||||
.m_axis_valid(_m_axis_valid),
|
||||
.m_axis_raddr(m_axis_raddr),
|
||||
.m_axis_level(m_axis_level),
|
||||
|
||||
.s_axis_ready(s_axis_ready),
|
||||
.s_axis_valid(s_axis_valid),
|
||||
.s_axis_empty(s_axis_empty),
|
||||
.s_axis_waddr(s_axis_waddr),
|
||||
.s_axis_room(s_axis_room)
|
||||
);
|
||||
|
||||
end
|
||||
|
||||
always @(posedge s_axis_aclk) begin
|
||||
if (s_axis_ready)
|
||||
ram[s_axis_waddr] <= s_axis_data;
|
||||
end
|
||||
|
||||
if (S_AXIS_REGISTERED == 1) begin
|
||||
|
||||
reg [DATA_WIDTH-1:0] data;
|
||||
reg valid;
|
||||
|
||||
always @(posedge m_axis_aclk) begin
|
||||
if (m_axis_aresetn == 1'b0) begin
|
||||
valid <= 1'b0;
|
||||
end else begin
|
||||
if (_m_axis_valid)
|
||||
valid <= 1'b1;
|
||||
else if (m_axis_ready)
|
||||
valid <= 1'b0;
|
||||
end
|
||||
end
|
||||
|
||||
always @(posedge m_axis_aclk) begin
|
||||
if (~valid || m_axis_ready)
|
||||
data <= ram[m_axis_raddr];
|
||||
end
|
||||
|
||||
assign _m_axis_ready = ~valid || m_axis_ready;
|
||||
assign m_axis_data = data;
|
||||
assign m_axis_valid = valid;
|
||||
|
||||
end else begin
|
||||
|
||||
assign _m_axis_ready = m_axis_ready;
|
||||
assign m_axis_valid = _m_axis_valid;
|
||||
assign m_axis_data = ram[m_axis_raddr];
|
||||
|
||||
end
|
||||
|
||||
end endgenerate
|
||||
|
||||
endmodule
|
||||
@@ -0,0 +1,38 @@
|
||||
|
||||
source ../scripts/adi_env.tcl
|
||||
source $ad_hdl_dir/library/scripts/adi_ip.tcl
|
||||
|
||||
adi_ip_create util_axis_fifo
|
||||
adi_ip_files util_axis_fifo [list \
|
||||
"$ad_hdl_dir/library/common/sync_bits.v" \
|
||||
"$ad_hdl_dir/library/common/sync_gray.v" \
|
||||
"address_gray.v" \
|
||||
"address_gray_pipelined.v" \
|
||||
"address_sync.v" \
|
||||
"util_axis_fifo.v" \
|
||||
]
|
||||
|
||||
adi_ip_properties_lite util_axis_fifo
|
||||
|
||||
adi_add_bus "S_AXIS" "slave" \
|
||||
"xilinx.com:interface:axis_rtl:1.0" \
|
||||
"xilinx.com:interface:axis:1.0" \
|
||||
{
|
||||
{"s_axis_valid" "TVALID"} \
|
||||
{"s_axis_ready" "TREADY"} \
|
||||
{"s_axis_data" "TDATA"} \
|
||||
}
|
||||
|
||||
adi_add_bus "M_AXIS" "master" \
|
||||
"xilinx.com:interface:axis_rtl:1.0" \
|
||||
"xilinx.com:interface:axis:1.0" \
|
||||
{
|
||||
{"m_axis_valid" "TVALID"} \
|
||||
{"m_axis_ready" "TREADY"} \
|
||||
{"m_axis_data" "TDATA"} \
|
||||
}
|
||||
|
||||
adi_add_bus_clock "m_axis_aclk" "M_AXIS" "m_axis_aresetn"
|
||||
adi_add_bus_clock "s_axis_aclk" "S_AXIS" "m_axis_aresetn"
|
||||
|
||||
ipx::save_core [ipx::current_core]
|
||||
@@ -0,0 +1,70 @@
|
||||
# Definitional proc to organize widgets for parameters.
|
||||
proc init_gui { IPINST } {
|
||||
ipgui::add_param $IPINST -name "Component_Name"
|
||||
#Adding Page
|
||||
set Page_0 [ipgui::add_page $IPINST -name "Page 0"]
|
||||
ipgui::add_param $IPINST -name "ADDRESS_WIDTH" -parent ${Page_0}
|
||||
ipgui::add_param $IPINST -name "ASYNC_CLK" -parent ${Page_0}
|
||||
ipgui::add_param $IPINST -name "DATA_WIDTH" -parent ${Page_0}
|
||||
ipgui::add_param $IPINST -name "S_AXIS_REGISTERED" -parent ${Page_0}
|
||||
|
||||
|
||||
}
|
||||
|
||||
proc update_PARAM_VALUE.ADDRESS_WIDTH { PARAM_VALUE.ADDRESS_WIDTH } {
|
||||
# Procedure called to update ADDRESS_WIDTH when any of the dependent parameters in the arguments change
|
||||
}
|
||||
|
||||
proc validate_PARAM_VALUE.ADDRESS_WIDTH { PARAM_VALUE.ADDRESS_WIDTH } {
|
||||
# Procedure called to validate ADDRESS_WIDTH
|
||||
return true
|
||||
}
|
||||
|
||||
proc update_PARAM_VALUE.ASYNC_CLK { PARAM_VALUE.ASYNC_CLK } {
|
||||
# Procedure called to update ASYNC_CLK when any of the dependent parameters in the arguments change
|
||||
}
|
||||
|
||||
proc validate_PARAM_VALUE.ASYNC_CLK { PARAM_VALUE.ASYNC_CLK } {
|
||||
# Procedure called to validate ASYNC_CLK
|
||||
return true
|
||||
}
|
||||
|
||||
proc update_PARAM_VALUE.DATA_WIDTH { PARAM_VALUE.DATA_WIDTH } {
|
||||
# Procedure called to update DATA_WIDTH when any of the dependent parameters in the arguments change
|
||||
}
|
||||
|
||||
proc validate_PARAM_VALUE.DATA_WIDTH { PARAM_VALUE.DATA_WIDTH } {
|
||||
# Procedure called to validate DATA_WIDTH
|
||||
return true
|
||||
}
|
||||
|
||||
proc update_PARAM_VALUE.S_AXIS_REGISTERED { PARAM_VALUE.S_AXIS_REGISTERED } {
|
||||
# Procedure called to update S_AXIS_REGISTERED when any of the dependent parameters in the arguments change
|
||||
}
|
||||
|
||||
proc validate_PARAM_VALUE.S_AXIS_REGISTERED { PARAM_VALUE.S_AXIS_REGISTERED } {
|
||||
# Procedure called to validate S_AXIS_REGISTERED
|
||||
return true
|
||||
}
|
||||
|
||||
|
||||
proc update_MODELPARAM_VALUE.DATA_WIDTH { MODELPARAM_VALUE.DATA_WIDTH PARAM_VALUE.DATA_WIDTH } {
|
||||
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
|
||||
set_property value [get_property value ${PARAM_VALUE.DATA_WIDTH}] ${MODELPARAM_VALUE.DATA_WIDTH}
|
||||
}
|
||||
|
||||
proc update_MODELPARAM_VALUE.ASYNC_CLK { MODELPARAM_VALUE.ASYNC_CLK PARAM_VALUE.ASYNC_CLK } {
|
||||
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
|
||||
set_property value [get_property value ${PARAM_VALUE.ASYNC_CLK}] ${MODELPARAM_VALUE.ASYNC_CLK}
|
||||
}
|
||||
|
||||
proc update_MODELPARAM_VALUE.ADDRESS_WIDTH { MODELPARAM_VALUE.ADDRESS_WIDTH PARAM_VALUE.ADDRESS_WIDTH } {
|
||||
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
|
||||
set_property value [get_property value ${PARAM_VALUE.ADDRESS_WIDTH}] ${MODELPARAM_VALUE.ADDRESS_WIDTH}
|
||||
}
|
||||
|
||||
proc update_MODELPARAM_VALUE.S_AXIS_REGISTERED { MODELPARAM_VALUE.S_AXIS_REGISTERED PARAM_VALUE.S_AXIS_REGISTERED } {
|
||||
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
|
||||
set_property value [get_property value ${PARAM_VALUE.S_AXIS_REGISTERED}] ${MODELPARAM_VALUE.S_AXIS_REGISTERED}
|
||||
}
|
||||
|
||||
Reference in New Issue
Block a user