miegl/b210-k7-fpga
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Merge FPGA repository back into UHD repository

Browse Source 
The FPGA codebase was removed from the UHD repository in 2014 to reduce
the size of the repository. However, over the last half-decade, the
split between the repositories has proven more burdensome than it has
been helpful. By merging the FPGA code back, it will be possible to
create atomic commits that touch both FPGA and UHD codebases. Continuous
integration testing is also simplified by merging the repositories,
because it was previously difficult to automatically derive the correct
UHD branch when testing a feature branch on the FPGA repository.

This commit also updates the license files and paths therein.

We are therefore merging the repositories again. Future development for
FPGA code will happen in the same repository as the UHD host code and
MPM code.

== Original Codebase and Rebasing ==

The original FPGA repository will be hosted for the foreseeable future
at its original local location: https://github.com/EttusResearch/fpga/

It can be used for bisecting, reference, and a more detailed history.

The final commit from said repository to be merged here is
05003794e2da61cabf64dd278c45685a7abad7ec. This commit is tagged as
v4.0.0.0-pre-uhd-merge.

If you have changes in the FPGA repository that you want to rebase onto
the UHD repository, simply run the following commands:

- Create a directory to store patches (this should be an empty
  directory):

    mkdir ~/patches

- Now make sure that your FPGA codebase is based on the same state as
  the code that was merged:

    cd src/fpga # Or wherever your FPGA code is stored
    git rebase v4.0.0.0-pre-uhd-merge

  Note: The rebase command may look slightly different depending on what
  exactly you're trying to rebase.

- Create a patch set for your changes versus v4.0.0.0-pre-uhd-merge:

    git format-patch v4.0.0.0-pre-uhd-merge -o ~/patches

  Note: Make sure that only patches are stored in your output directory.
  It should otherwise be empty. Make sure that you picked the correct
  range of commits, and only commits you wanted to rebase were exported
  as patch files.

- Go to the UHD repository and apply the patches:

    cd src/uhd # Or wherever your UHD repository is stored
    git am --directory fpga ~/patches/*
    rm -rf ~/patches # This is for cleanup

== Contributors ==

The following people have contributed mainly to these files (this list
is not complete):

Co-authored-by: Alex Williams <alex.williams@ni.com>
Co-authored-by: Andrej Rode <andrej.rode@ettus.com>
Co-authored-by: Ashish Chaudhari <ashish@ettus.com>
Co-authored-by: Ben Hilburn <ben.hilburn@ettus.com>
Co-authored-by: Ciro Nishiguchi <ciro.nishiguchi@ni.com>
Co-authored-by: Daniel Jepson <daniel.jepson@ni.com>
Co-authored-by: Derek Kozel <derek.kozel@ettus.com>
Co-authored-by: EJ Kreinar <ej@he360.com>
Co-authored-by: Humberto Jimenez <humberto.jimenez@ni.com>
Co-authored-by: Ian Buckley <ian.buckley@gmail.com>
Co-authored-by: Jörg Hofrichter <joerg.hofrichter@ni.com>
Co-authored-by: Jon Kiser <jon.kiser@ni.com>
Co-authored-by: Josh Blum <josh@joshknows.com>
Co-authored-by: Jonathon Pendlum <jonathan.pendlum@ettus.com>
Co-authored-by: Martin Braun <martin.braun@ettus.com>
Co-authored-by: Matt Ettus <matt@ettus.com>
Co-authored-by: Michael West <michael.west@ettus.com>
Co-authored-by: Moritz Fischer <moritz.fischer@ettus.com>
Co-authored-by: Nick Foster <nick@ettus.com>
Co-authored-by: Nicolas Cuervo <nicolas.cuervo@ettus.com>
Co-authored-by: Paul Butler <paul.butler@ni.com>
Co-authored-by: Paul David <paul.david@ettus.com>
Co-authored-by: Ryan Marlow <ryan.marlow@ettus.com>
Co-authored-by: Sugandha Gupta <sugandha.gupta@ettus.com>
Co-authored-by: Sylvain Munaut <tnt@246tNt.com>
Co-authored-by: Trung Tran <trung.tran@ettus.com>
Co-authored-by: Vidush Vishwanath <vidush.vishwanath@ettus.com>
Co-authored-by: Wade Fife <wade.fife@ettus.com>


Original-commit: bafa9d95453387814ef25e6b6256ba8db2df612f
This commit is contained in:
Martin Braun
2020-01-28 09:35:36 -08:00
co-authored by Alex Williams Andrej Rode Ashish Chaudhari Ben Hilburn Ciro Nishiguchi Daniel Jepson Derek Kozel EJ Kreinar Humberto Jimenez Ian Buckley Jörg Hofrichter Jon Kiser Josh Blum Jonathon Pendlum Matt Ettus Michael West Moritz Fischer Nick Foster Nicolas Cuervo Paul Butler Paul David Ryan Marlow Sugandha Gupta Sylvain Munaut Trung Tran Vidush Vishwanath Wade Fife
parent 74893643ca
commit 6b67702ad7
2157 changed files with 1282567 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files
lib/vivado_ipi/axi_dmac/xgui/axi_dmac_v1_0.tcl
+329
View File
@@ -0,0 +1,329 @@
# Loading additional proc with user specified bodies to compute parameter values.
source [file join [file dirname [file dirname [info script]]] gui/axi_dmac_v1_0.gtcl]
# Definitional proc to organize widgets for parameters.
proc init_gui { IPINST } {
ipgui::add_param $IPINST -name "Component_Name"
#Adding Page
set Page_0 [ipgui::add_page $IPINST -name "Page 0"]
#Adding Group
set DMA_Endpoint_Configuration [ipgui::add_group $IPINST -name "DMA Endpoint Configuration" -parent ${Page_0} -layout horizontal]
#Adding Group
set Source [ipgui::add_group $IPINST -name "Source" -parent ${DMA_Endpoint_Configuration}]
ipgui::add_param $IPINST -name "DMA_TYPE_SRC" -parent ${Source} -widget comboBox
ipgui::add_param $IPINST -name "DMA_AXI_PROTOCOL_SRC" -parent ${Source} -widget comboBox
ipgui::add_param $IPINST -name "DMA_DATA_WIDTH_SRC" -parent ${Source}
ipgui::add_param $IPINST -name "AXI_SLICE_SRC" -parent ${Source}
ipgui::add_param $IPINST -name "SYNC_TRANSFER_START" -parent ${Source}
#Adding Group
set Destination [ipgui::add_group $IPINST -name "Destination" -parent ${DMA_Endpoint_Configuration}]
ipgui::add_param $IPINST -name "DMA_TYPE_DEST" -parent ${Destination} -widget comboBox
ipgui::add_param $IPINST -name "DMA_AXI_PROTOCOL_DEST" -parent ${Destination} -widget comboBox
ipgui::add_param $IPINST -name "DMA_DATA_WIDTH_DEST" -parent ${Destination}
ipgui::add_param $IPINST -name "AXI_SLICE_DEST" -parent ${Destination}
#Adding Group
set General_Configuration [ipgui::add_group $IPINST -name "General Configuration" -parent ${Page_0}]
ipgui::add_param $IPINST -name "ID" -parent ${General_Configuration}
ipgui::add_param $IPINST -name "DMA_LENGTH_WIDTH" -parent ${General_Configuration}
ipgui::add_param $IPINST -name "FIFO_SIZE" -parent ${General_Configuration}
ipgui::add_param $IPINST -name "MAX_BYTES_PER_BURST" -parent ${General_Configuration}
#Adding Group
set Features [ipgui::add_group $IPINST -name "Features" -parent ${Page_0}]
ipgui::add_param $IPINST -name "CYCLIC" -parent ${Features}
ipgui::add_param $IPINST -name "DMA_2D_TRANSFER" -parent ${Features}
#Adding Group
set Clock_Domain_Configuration [ipgui::add_group $IPINST -name "Clock Domain Configuration" -parent ${Page_0}]
ipgui::add_param $IPINST -name "ASYNC_CLK_REQ_SRC" -parent ${Clock_Domain_Configuration}
ipgui::add_param $IPINST -name "ASYNC_CLK_SRC_DEST" -parent ${Clock_Domain_Configuration}
ipgui::add_param $IPINST -name "ASYNC_CLK_DEST_REQ" -parent ${Clock_Domain_Configuration}
}
proc update_PARAM_VALUE.DMA_AXI_PROTOCOL_DEST { PARAM_VALUE.DMA_AXI_PROTOCOL_DEST PARAM_VALUE.DMA_TYPE_DEST } {
# Procedure called to update DMA_AXI_PROTOCOL_DEST when any of the dependent parameters in the arguments change
set DMA_AXI_PROTOCOL_DEST ${PARAM_VALUE.DMA_AXI_PROTOCOL_DEST}
set DMA_TYPE_DEST ${PARAM_VALUE.DMA_TYPE_DEST}
set values(DMA_TYPE_DEST) [get_property value $DMA_TYPE_DEST]
if { [gen_USERPARAMETER_DMA_AXI_PROTOCOL_DEST_ENABLEMENT $values(DMA_TYPE_DEST)] } {
set_property enabled true $DMA_AXI_PROTOCOL_DEST
} else {
set_property enabled false $DMA_AXI_PROTOCOL_DEST
}
}
proc validate_PARAM_VALUE.DMA_AXI_PROTOCOL_DEST { PARAM_VALUE.DMA_AXI_PROTOCOL_DEST } {
# Procedure called to validate DMA_AXI_PROTOCOL_DEST
return true
}
proc update_PARAM_VALUE.DMA_AXI_PROTOCOL_SRC { PARAM_VALUE.DMA_AXI_PROTOCOL_SRC PARAM_VALUE.DMA_TYPE_SRC } {
# Procedure called to update DMA_AXI_PROTOCOL_SRC when any of the dependent parameters in the arguments change
set DMA_AXI_PROTOCOL_SRC ${PARAM_VALUE.DMA_AXI_PROTOCOL_SRC}
set DMA_TYPE_SRC ${PARAM_VALUE.DMA_TYPE_SRC}
set values(DMA_TYPE_SRC) [get_property value $DMA_TYPE_SRC]
if { [gen_USERPARAMETER_DMA_AXI_PROTOCOL_SRC_ENABLEMENT $values(DMA_TYPE_SRC)] } {
set_property enabled true $DMA_AXI_PROTOCOL_SRC
} else {
set_property enabled false $DMA_AXI_PROTOCOL_SRC
}
}
proc validate_PARAM_VALUE.DMA_AXI_PROTOCOL_SRC { PARAM_VALUE.DMA_AXI_PROTOCOL_SRC } {
# Procedure called to validate DMA_AXI_PROTOCOL_SRC
return true
}
proc update_PARAM_VALUE.SYNC_TRANSFER_START { PARAM_VALUE.SYNC_TRANSFER_START PARAM_VALUE.DMA_TYPE_SRC } {
# Procedure called to update SYNC_TRANSFER_START when any of the dependent parameters in the arguments change
set SYNC_TRANSFER_START ${PARAM_VALUE.SYNC_TRANSFER_START}
set DMA_TYPE_SRC ${PARAM_VALUE.DMA_TYPE_SRC}
set values(DMA_TYPE_SRC) [get_property value $DMA_TYPE_SRC]
if { [gen_USERPARAMETER_SYNC_TRANSFER_START_ENABLEMENT $values(DMA_TYPE_SRC)] } {
set_property enabled true $SYNC_TRANSFER_START
} else {
set_property enabled false $SYNC_TRANSFER_START
}
}
proc validate_PARAM_VALUE.SYNC_TRANSFER_START { PARAM_VALUE.SYNC_TRANSFER_START } {
# Procedure called to validate SYNC_TRANSFER_START
return true
}
proc update_PARAM_VALUE.ASYNC_CLK_DEST_REQ { PARAM_VALUE.ASYNC_CLK_DEST_REQ } {
# Procedure called to update ASYNC_CLK_DEST_REQ when any of the dependent parameters in the arguments change
}
proc validate_PARAM_VALUE.ASYNC_CLK_DEST_REQ { PARAM_VALUE.ASYNC_CLK_DEST_REQ } {
# Procedure called to validate ASYNC_CLK_DEST_REQ
return true
}
proc update_PARAM_VALUE.ASYNC_CLK_REQ_SRC { PARAM_VALUE.ASYNC_CLK_REQ_SRC } {
# Procedure called to update ASYNC_CLK_REQ_SRC when any of the dependent parameters in the arguments change
}
proc validate_PARAM_VALUE.ASYNC_CLK_REQ_SRC { PARAM_VALUE.ASYNC_CLK_REQ_SRC } {
# Procedure called to validate ASYNC_CLK_REQ_SRC
return true
}
proc update_PARAM_VALUE.ASYNC_CLK_SRC_DEST { PARAM_VALUE.ASYNC_CLK_SRC_DEST } {
# Procedure called to update ASYNC_CLK_SRC_DEST when any of the dependent parameters in the arguments change
}
proc validate_PARAM_VALUE.ASYNC_CLK_SRC_DEST { PARAM_VALUE.ASYNC_CLK_SRC_DEST } {
# Procedure called to validate ASYNC_CLK_SRC_DEST
return true
}
proc update_PARAM_VALUE.AXI_SLICE_DEST { PARAM_VALUE.AXI_SLICE_DEST } {
# Procedure called to update AXI_SLICE_DEST when any of the dependent parameters in the arguments change
}
proc validate_PARAM_VALUE.AXI_SLICE_DEST { PARAM_VALUE.AXI_SLICE_DEST } {
# Procedure called to validate AXI_SLICE_DEST
return true
}
proc update_PARAM_VALUE.AXI_SLICE_SRC { PARAM_VALUE.AXI_SLICE_SRC } {
# Procedure called to update AXI_SLICE_SRC when any of the dependent parameters in the arguments change
}
proc validate_PARAM_VALUE.AXI_SLICE_SRC { PARAM_VALUE.AXI_SLICE_SRC } {
# Procedure called to validate AXI_SLICE_SRC
return true
}
proc update_PARAM_VALUE.CYCLIC { PARAM_VALUE.CYCLIC } {
# Procedure called to update CYCLIC when any of the dependent parameters in the arguments change
}
proc validate_PARAM_VALUE.CYCLIC { PARAM_VALUE.CYCLIC } {
# Procedure called to validate CYCLIC
return true
}
proc update_PARAM_VALUE.DMA_2D_TRANSFER { PARAM_VALUE.DMA_2D_TRANSFER } {
# Procedure called to update DMA_2D_TRANSFER when any of the dependent parameters in the arguments change
}
proc validate_PARAM_VALUE.DMA_2D_TRANSFER { PARAM_VALUE.DMA_2D_TRANSFER } {
# Procedure called to validate DMA_2D_TRANSFER
return true
}
proc update_PARAM_VALUE.DMA_DATA_WIDTH_DEST { PARAM_VALUE.DMA_DATA_WIDTH_DEST } {
# Procedure called to update DMA_DATA_WIDTH_DEST when any of the dependent parameters in the arguments change
}
proc validate_PARAM_VALUE.DMA_DATA_WIDTH_DEST { PARAM_VALUE.DMA_DATA_WIDTH_DEST } {
# Procedure called to validate DMA_DATA_WIDTH_DEST
return true
}
proc update_PARAM_VALUE.DMA_DATA_WIDTH_SRC { PARAM_VALUE.DMA_DATA_WIDTH_SRC } {
# Procedure called to update DMA_DATA_WIDTH_SRC when any of the dependent parameters in the arguments change
}
proc validate_PARAM_VALUE.DMA_DATA_WIDTH_SRC { PARAM_VALUE.DMA_DATA_WIDTH_SRC } {
# Procedure called to validate DMA_DATA_WIDTH_SRC
return true
}
proc update_PARAM_VALUE.DMA_LENGTH_WIDTH { PARAM_VALUE.DMA_LENGTH_WIDTH } {
# Procedure called to update DMA_LENGTH_WIDTH when any of the dependent parameters in the arguments change
}
proc validate_PARAM_VALUE.DMA_LENGTH_WIDTH { PARAM_VALUE.DMA_LENGTH_WIDTH } {
# Procedure called to validate DMA_LENGTH_WIDTH
return true
}
proc update_PARAM_VALUE.DMA_TYPE_DEST { PARAM_VALUE.DMA_TYPE_DEST } {
# Procedure called to update DMA_TYPE_DEST when any of the dependent parameters in the arguments change
}
proc validate_PARAM_VALUE.DMA_TYPE_DEST { PARAM_VALUE.DMA_TYPE_DEST } {
# Procedure called to validate DMA_TYPE_DEST
return true
}
proc update_PARAM_VALUE.DMA_TYPE_SRC { PARAM_VALUE.DMA_TYPE_SRC } {
# Procedure called to update DMA_TYPE_SRC when any of the dependent parameters in the arguments change
}
proc validate_PARAM_VALUE.DMA_TYPE_SRC { PARAM_VALUE.DMA_TYPE_SRC } {
# Procedure called to validate DMA_TYPE_SRC
return true
}
proc update_PARAM_VALUE.FIFO_SIZE { PARAM_VALUE.FIFO_SIZE } {
# Procedure called to update FIFO_SIZE when any of the dependent parameters in the arguments change
}
proc validate_PARAM_VALUE.FIFO_SIZE { PARAM_VALUE.FIFO_SIZE } {
# Procedure called to validate FIFO_SIZE
return true
}
proc update_PARAM_VALUE.ID { PARAM_VALUE.ID } {
# Procedure called to update ID when any of the dependent parameters in the arguments change
}
proc validate_PARAM_VALUE.ID { PARAM_VALUE.ID } {
# Procedure called to validate ID
return true
}
proc update_PARAM_VALUE.MAX_BYTES_PER_BURST { PARAM_VALUE.MAX_BYTES_PER_BURST } {
# Procedure called to update MAX_BYTES_PER_BURST when any of the dependent parameters in the arguments change
}
proc validate_PARAM_VALUE.MAX_BYTES_PER_BURST { PARAM_VALUE.MAX_BYTES_PER_BURST } {
# Procedure called to validate MAX_BYTES_PER_BURST
return true
}
proc update_MODELPARAM_VALUE.ID { MODELPARAM_VALUE.ID PARAM_VALUE.ID } {
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
set_property value [get_property value ${PARAM_VALUE.ID}] ${MODELPARAM_VALUE.ID}
}
proc update_MODELPARAM_VALUE.DMA_DATA_WIDTH_SRC { MODELPARAM_VALUE.DMA_DATA_WIDTH_SRC PARAM_VALUE.DMA_DATA_WIDTH_SRC } {
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
set_property value [get_property value ${PARAM_VALUE.DMA_DATA_WIDTH_SRC}] ${MODELPARAM_VALUE.DMA_DATA_WIDTH_SRC}
}
proc update_MODELPARAM_VALUE.DMA_DATA_WIDTH_DEST { MODELPARAM_VALUE.DMA_DATA_WIDTH_DEST PARAM_VALUE.DMA_DATA_WIDTH_DEST } {
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
set_property value [get_property value ${PARAM_VALUE.DMA_DATA_WIDTH_DEST}] ${MODELPARAM_VALUE.DMA_DATA_WIDTH_DEST}
}
proc update_MODELPARAM_VALUE.DMA_LENGTH_WIDTH { MODELPARAM_VALUE.DMA_LENGTH_WIDTH PARAM_VALUE.DMA_LENGTH_WIDTH } {
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
set_property value [get_property value ${PARAM_VALUE.DMA_LENGTH_WIDTH}] ${MODELPARAM_VALUE.DMA_LENGTH_WIDTH}
}
proc update_MODELPARAM_VALUE.DMA_2D_TRANSFER { MODELPARAM_VALUE.DMA_2D_TRANSFER PARAM_VALUE.DMA_2D_TRANSFER } {
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
set_property value [get_property value ${PARAM_VALUE.DMA_2D_TRANSFER}] ${MODELPARAM_VALUE.DMA_2D_TRANSFER}
}
proc update_MODELPARAM_VALUE.ASYNC_CLK_REQ_SRC { MODELPARAM_VALUE.ASYNC_CLK_REQ_SRC PARAM_VALUE.ASYNC_CLK_REQ_SRC } {
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
set_property value [get_property value ${PARAM_VALUE.ASYNC_CLK_REQ_SRC}] ${MODELPARAM_VALUE.ASYNC_CLK_REQ_SRC}
}
proc update_MODELPARAM_VALUE.ASYNC_CLK_SRC_DEST { MODELPARAM_VALUE.ASYNC_CLK_SRC_DEST PARAM_VALUE.ASYNC_CLK_SRC_DEST } {
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
set_property value [get_property value ${PARAM_VALUE.ASYNC_CLK_SRC_DEST}] ${MODELPARAM_VALUE.ASYNC_CLK_SRC_DEST}
}
proc update_MODELPARAM_VALUE.ASYNC_CLK_DEST_REQ { MODELPARAM_VALUE.ASYNC_CLK_DEST_REQ PARAM_VALUE.ASYNC_CLK_DEST_REQ } {
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
set_property value [get_property value ${PARAM_VALUE.ASYNC_CLK_DEST_REQ}] ${MODELPARAM_VALUE.ASYNC_CLK_DEST_REQ}
}
proc update_MODELPARAM_VALUE.AXI_SLICE_DEST { MODELPARAM_VALUE.AXI_SLICE_DEST PARAM_VALUE.AXI_SLICE_DEST } {
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
set_property value [get_property value ${PARAM_VALUE.AXI_SLICE_DEST}] ${MODELPARAM_VALUE.AXI_SLICE_DEST}
}
proc update_MODELPARAM_VALUE.AXI_SLICE_SRC { MODELPARAM_VALUE.AXI_SLICE_SRC PARAM_VALUE.AXI_SLICE_SRC } {
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
set_property value [get_property value ${PARAM_VALUE.AXI_SLICE_SRC}] ${MODELPARAM_VALUE.AXI_SLICE_SRC}
}
proc update_MODELPARAM_VALUE.SYNC_TRANSFER_START { MODELPARAM_VALUE.SYNC_TRANSFER_START PARAM_VALUE.SYNC_TRANSFER_START } {
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
set_property value [get_property value ${PARAM_VALUE.SYNC_TRANSFER_START}] ${MODELPARAM_VALUE.SYNC_TRANSFER_START}
}
proc update_MODELPARAM_VALUE.CYCLIC { MODELPARAM_VALUE.CYCLIC PARAM_VALUE.CYCLIC } {
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
set_property value [get_property value ${PARAM_VALUE.CYCLIC}] ${MODELPARAM_VALUE.CYCLIC}
}
proc update_MODELPARAM_VALUE.DMA_AXI_PROTOCOL_DEST { MODELPARAM_VALUE.DMA_AXI_PROTOCOL_DEST PARAM_VALUE.DMA_AXI_PROTOCOL_DEST } {
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
set_property value [get_property value ${PARAM_VALUE.DMA_AXI_PROTOCOL_DEST}] ${MODELPARAM_VALUE.DMA_AXI_PROTOCOL_DEST}
}
proc update_MODELPARAM_VALUE.DMA_AXI_PROTOCOL_SRC { MODELPARAM_VALUE.DMA_AXI_PROTOCOL_SRC PARAM_VALUE.DMA_AXI_PROTOCOL_SRC } {
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
set_property value [get_property value ${PARAM_VALUE.DMA_AXI_PROTOCOL_SRC}] ${MODELPARAM_VALUE.DMA_AXI_PROTOCOL_SRC}
}
proc update_MODELPARAM_VALUE.DMA_TYPE_DEST { MODELPARAM_VALUE.DMA_TYPE_DEST PARAM_VALUE.DMA_TYPE_DEST } {
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
set_property value [get_property value ${PARAM_VALUE.DMA_TYPE_DEST}] ${MODELPARAM_VALUE.DMA_TYPE_DEST}
}
proc update_MODELPARAM_VALUE.DMA_TYPE_SRC { MODELPARAM_VALUE.DMA_TYPE_SRC PARAM_VALUE.DMA_TYPE_SRC } {
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
set_property value [get_property value ${PARAM_VALUE.DMA_TYPE_SRC}] ${MODELPARAM_VALUE.DMA_TYPE_SRC}
}
proc update_MODELPARAM_VALUE.MAX_BYTES_PER_BURST { MODELPARAM_VALUE.MAX_BYTES_PER_BURST PARAM_VALUE.MAX_BYTES_PER_BURST } {
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
set_property value [get_property value ${PARAM_VALUE.MAX_BYTES_PER_BURST}] ${MODELPARAM_VALUE.MAX_BYTES_PER_BURST}
}
proc update_MODELPARAM_VALUE.FIFO_SIZE { MODELPARAM_VALUE.FIFO_SIZE PARAM_VALUE.FIFO_SIZE } {
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
set_property value [get_property value ${PARAM_VALUE.FIFO_SIZE}] ${MODELPARAM_VALUE.FIFO_SIZE}
}