Merge FPGA repository back into UHD repository
The FPGA codebase was removed from the UHD repository in 2014 to reduce the size of the repository. However, over the last half-decade, the split between the repositories has proven more burdensome than it has been helpful. By merging the FPGA code back, it will be possible to create atomic commits that touch both FPGA and UHD codebases. Continuous integration testing is also simplified by merging the repositories, because it was previously difficult to automatically derive the correct UHD branch when testing a feature branch on the FPGA repository. This commit also updates the license files and paths therein. We are therefore merging the repositories again. Future development for FPGA code will happen in the same repository as the UHD host code and MPM code. == Original Codebase and Rebasing == The original FPGA repository will be hosted for the foreseeable future at its original local location: https://github.com/EttusResearch/fpga/ It can be used for bisecting, reference, and a more detailed history. The final commit from said repository to be merged here is 05003794e2da61cabf64dd278c45685a7abad7ec. This commit is tagged as v4.0.0.0-pre-uhd-merge. If you have changes in the FPGA repository that you want to rebase onto the UHD repository, simply run the following commands: - Create a directory to store patches (this should be an empty directory): mkdir ~/patches - Now make sure that your FPGA codebase is based on the same state as the code that was merged: cd src/fpga # Or wherever your FPGA code is stored git rebase v4.0.0.0-pre-uhd-merge Note: The rebase command may look slightly different depending on what exactly you're trying to rebase. - Create a patch set for your changes versus v4.0.0.0-pre-uhd-merge: git format-patch v4.0.0.0-pre-uhd-merge -o ~/patches Note: Make sure that only patches are stored in your output directory. It should otherwise be empty. Make sure that you picked the correct range of commits, and only commits you wanted to rebase were exported as patch files. - Go to the UHD repository and apply the patches: cd src/uhd # Or wherever your UHD repository is stored git am --directory fpga ~/patches/* rm -rf ~/patches # This is for cleanup == Contributors == The following people have contributed mainly to these files (this list is not complete): Co-authored-by: Alex Williams <alex.williams@ni.com> Co-authored-by: Andrej Rode <andrej.rode@ettus.com> Co-authored-by: Ashish Chaudhari <ashish@ettus.com> Co-authored-by: Ben Hilburn <ben.hilburn@ettus.com> Co-authored-by: Ciro Nishiguchi <ciro.nishiguchi@ni.com> Co-authored-by: Daniel Jepson <daniel.jepson@ni.com> Co-authored-by: Derek Kozel <derek.kozel@ettus.com> Co-authored-by: EJ Kreinar <ej@he360.com> Co-authored-by: Humberto Jimenez <humberto.jimenez@ni.com> Co-authored-by: Ian Buckley <ian.buckley@gmail.com> Co-authored-by: Jörg Hofrichter <joerg.hofrichter@ni.com> Co-authored-by: Jon Kiser <jon.kiser@ni.com> Co-authored-by: Josh Blum <josh@joshknows.com> Co-authored-by: Jonathon Pendlum <jonathan.pendlum@ettus.com> Co-authored-by: Martin Braun <martin.braun@ettus.com> Co-authored-by: Matt Ettus <matt@ettus.com> Co-authored-by: Michael West <michael.west@ettus.com> Co-authored-by: Moritz Fischer <moritz.fischer@ettus.com> Co-authored-by: Nick Foster <nick@ettus.com> Co-authored-by: Nicolas Cuervo <nicolas.cuervo@ettus.com> Co-authored-by: Paul Butler <paul.butler@ni.com> Co-authored-by: Paul David <paul.david@ettus.com> Co-authored-by: Ryan Marlow <ryan.marlow@ettus.com> Co-authored-by: Sugandha Gupta <sugandha.gupta@ettus.com> Co-authored-by: Sylvain Munaut <tnt@246tNt.com> Co-authored-by: Trung Tran <trung.tran@ettus.com> Co-authored-by: Vidush Vishwanath <vidush.vishwanath@ettus.com> Co-authored-by: Wade Fife <wade.fife@ettus.com> Original-commit: bafa9d95453387814ef25e6b6256ba8db2df612f
This commit is contained in:
Martin Braun
co-authored by
Alex Williams
Andrej Rode
Ashish Chaudhari
Ben Hilburn
Ciro Nishiguchi
Daniel Jepson
Derek Kozel
EJ Kreinar
Humberto Jimenez
Ian Buckley
Jörg Hofrichter
Jon Kiser
Josh Blum
Jonathon Pendlum
Matt Ettus
Michael West
Moritz Fischer
Nick Foster
Nicolas Cuervo
Paul Butler
Paul David
Ryan Marlow
Sugandha Gupta
Sylvain Munaut
Trung Tran
Vidush Vishwanath
Wade Fife
Alex Williams
Andrej Rode
Ashish Chaudhari
Ben Hilburn
Ciro Nishiguchi
Daniel Jepson
Derek Kozel
EJ Kreinar
Humberto Jimenez
Ian Buckley
Jörg Hofrichter
Jon Kiser
Josh Blum
Jonathon Pendlum
Matt Ettus
Michael West
Moritz Fischer
Nick Foster
Nicolas Cuervo
Paul Butler
Paul David
Ryan Marlow
Sugandha Gupta
Sylvain Munaut
Trung Tran
Vidush Vishwanath
Wade Fife
parent
74893643ca
commit
6b67702ad7
@@ -0,0 +1,67 @@
|
||||
#
|
||||
# Copyright 2019 Ettus Research, A National Instruments Company
|
||||
#
|
||||
# SPDX-License-Identifier: LGPL-3.0-or-later
|
||||
#
|
||||
|
||||
#-------------------------------------------------
|
||||
# Top-of-Makefile
|
||||
#-------------------------------------------------
|
||||
# Define BASE_DIR to point to the "top" dir
|
||||
BASE_DIR = $(abspath ../../../../top)
|
||||
# Include viv_sim_preamble after defining BASE_DIR
|
||||
include $(BASE_DIR)/../tools/make/viv_sim_preamble.mak
|
||||
|
||||
#-------------------------------------------------
|
||||
# IP Specific
|
||||
#-------------------------------------------------
|
||||
# If simulation contains IP, define the IP_DIR and point
|
||||
# it to the base level IP directory
|
||||
LIB_IP_DIR = $(BASE_DIR)/../lib/ip
|
||||
|
||||
# Include makefiles and sources for all IP components
|
||||
# *after* defining the LIB_IP_DIR
|
||||
include $(LIB_IP_DIR)/axi_hb47/Makefile.inc
|
||||
include $(LIB_IP_DIR)/complex_multiplier_dds/Makefile.inc
|
||||
include $(LIB_IP_DIR)/dds_sin_cos_lut_only/Makefile.inc
|
||||
include $(BASE_DIR)/x300/coregen_dsp/Makefile.srcs
|
||||
|
||||
DESIGN_SRCS += $(abspath \
|
||||
$(LIB_IP_AXI_HB47_SRCS) \
|
||||
$(LIB_IP_COMPLEX_MULTIPLIER_DDS_SRCS) \
|
||||
$(LIB_IP_DDS_SIN_COS_LUT_ONLY_SRCS) \
|
||||
$(COREGEN_DSP_SRCS) \
|
||||
)
|
||||
|
||||
#-------------------------------------------------
|
||||
# Design Specific
|
||||
#-------------------------------------------------
|
||||
# Include makefiles and sources for the DUT and its dependencies
|
||||
include $(BASE_DIR)/../lib/rfnoc/core/Makefile.srcs
|
||||
include $(BASE_DIR)/../lib/rfnoc/utils/Makefile.srcs
|
||||
include Makefile.srcs
|
||||
|
||||
DESIGN_SRCS += $(abspath \
|
||||
$(RFNOC_CORE_SRCS) \
|
||||
$(RFNOC_UTIL_SRCS) \
|
||||
$(RFNOC_BLOCK_DUC_SRCS) \
|
||||
)
|
||||
|
||||
#-------------------------------------------------
|
||||
# Testbench Specific
|
||||
#-------------------------------------------------
|
||||
# Define only one toplevel module
|
||||
SIM_TOP = rfnoc_block_duc_tb
|
||||
|
||||
# Add test bench, user design under test, and
|
||||
# additional user created files
|
||||
SIM_SRCS = \
|
||||
$(abspath rfnoc_block_duc_tb.sv)
|
||||
|
||||
#-------------------------------------------------
|
||||
# Bottom-of-Makefile
|
||||
#-------------------------------------------------
|
||||
# Include all simulator specific makefiles here
|
||||
# Each should define a unique target to simulate
|
||||
# e.g. xsim, vsim, etc and a common "clean" target
|
||||
include $(BASE_DIR)/../tools/make/viv_simulator.mak
|
||||
@@ -0,0 +1,11 @@
|
||||
#
|
||||
# Copyright 2019 Ettus Research, A National Instruments Company
|
||||
#
|
||||
# SPDX-License-Identifier: LGPL-3.0-or-later
|
||||
#
|
||||
|
||||
RFNOC_BLOCK_DUC_SRCS = $(abspath $(addprefix $(BASE_DIR)/../lib/rfnoc/blocks/rfnoc_block_duc/, \
|
||||
../rfnoc_block_ddc/noc_shell_ddc.v \
|
||||
rfnoc_block_duc_regs.vh \
|
||||
rfnoc_block_duc.v \
|
||||
))
|
||||
@@ -0,0 +1,387 @@
|
||||
//
|
||||
// Copyright 2019 Ettus Research, a National Instruments Company
|
||||
//
|
||||
// SPDX-License-Identifier: LGPL-3.0-or-later
|
||||
//
|
||||
// Module: rfnoc_block_duc
|
||||
//
|
||||
// Description: An digital up-converter block for RFNoC.
|
||||
//
|
||||
// Parameters:
|
||||
//
|
||||
// THIS_PORTID : Control crossbar port to which this block is connected
|
||||
// CHDR_W : AXIS CHDR interface data width
|
||||
// NUM_PORTS : Number of DUC signal processing chains
|
||||
// MTU : Maximum transmission unit (i.e., maximum packet size) in
|
||||
// CHDR words is 2**MTU.
|
||||
// CTRL_FIFO_SIZE : Size of the Control Port slave FIFO. This affects the
|
||||
// number of outstanding commands that can be pending.
|
||||
// NUM_HB : Number of half-band filter blocks to include (0-3)
|
||||
// CIC_MAX_INTERP : Maximum interpolation to support in the CIC filter
|
||||
//
|
||||
|
||||
module rfnoc_block_duc #(
|
||||
parameter THIS_PORTID = 0,
|
||||
parameter CHDR_W = 64,
|
||||
parameter NUM_PORTS = 2,
|
||||
parameter MTU = 10,
|
||||
parameter CTRL_FIFO_SIZE = 6,
|
||||
parameter NUM_HB = 2,
|
||||
parameter CIC_MAX_INTERP = 128
|
||||
) (
|
||||
//---------------------------------------------------------------------------
|
||||
// AXIS CHDR Port
|
||||
//---------------------------------------------------------------------------
|
||||
|
||||
input wire rfnoc_chdr_clk,
|
||||
input wire ce_clk,
|
||||
|
||||
// CHDR inputs from framework
|
||||
input wire [NUM_PORTS*CHDR_W-1:0] s_rfnoc_chdr_tdata,
|
||||
input wire [ NUM_PORTS-1:0] s_rfnoc_chdr_tlast,
|
||||
input wire [ NUM_PORTS-1:0] s_rfnoc_chdr_tvalid,
|
||||
output wire [ NUM_PORTS-1:0] s_rfnoc_chdr_tready,
|
||||
|
||||
// CHDR outputs to framework
|
||||
output wire [NUM_PORTS*CHDR_W-1:0] m_rfnoc_chdr_tdata,
|
||||
output wire [ NUM_PORTS-1:0] m_rfnoc_chdr_tlast,
|
||||
output wire [ NUM_PORTS-1:0] m_rfnoc_chdr_tvalid,
|
||||
input wire [ NUM_PORTS-1:0] m_rfnoc_chdr_tready,
|
||||
|
||||
// Backend interface
|
||||
input wire [511:0] rfnoc_core_config,
|
||||
output wire [511:0] rfnoc_core_status,
|
||||
|
||||
//---------------------------------------------------------------------------
|
||||
// AXIS CTRL Port
|
||||
//---------------------------------------------------------------------------
|
||||
|
||||
input wire rfnoc_ctrl_clk,
|
||||
|
||||
// CTRL port requests from framework
|
||||
input wire [31:0] s_rfnoc_ctrl_tdata,
|
||||
input wire s_rfnoc_ctrl_tlast,
|
||||
input wire s_rfnoc_ctrl_tvalid,
|
||||
output wire s_rfnoc_ctrl_tready,
|
||||
|
||||
// CTRL port requests to framework
|
||||
output wire [31:0] m_rfnoc_ctrl_tdata,
|
||||
output wire m_rfnoc_ctrl_tlast,
|
||||
output wire m_rfnoc_ctrl_tvalid,
|
||||
input wire m_rfnoc_ctrl_tready
|
||||
);
|
||||
|
||||
// These are the only supported values for now
|
||||
localparam ITEM_W = 32;
|
||||
localparam NIPC = 1;
|
||||
|
||||
localparam NOC_ID = 'hD0C0_0000;
|
||||
|
||||
localparam COMPAT_MAJOR = 16'h0;
|
||||
localparam COMPAT_MINOR = 16'h0;
|
||||
|
||||
`include "rfnoc_block_duc_regs.vh"
|
||||
`include "../../core/rfnoc_axis_ctrl_utils.vh"
|
||||
|
||||
|
||||
//---------------------------------------------------------------------------
|
||||
// Signal Declarations
|
||||
//---------------------------------------------------------------------------
|
||||
|
||||
wire rfnoc_chdr_rst;
|
||||
|
||||
wire ctrlport_req_wr;
|
||||
wire ctrlport_req_rd;
|
||||
wire [19:0] ctrlport_req_addr;
|
||||
wire [31:0] ctrlport_req_data;
|
||||
wire ctrlport_req_has_time;
|
||||
wire [63:0] ctrlport_req_time;
|
||||
wire ctrlport_resp_ack;
|
||||
wire [31:0] ctrlport_resp_data;
|
||||
|
||||
wire [NUM_PORTS*ITEM_W-1:0] m_axis_data_tdata;
|
||||
wire [ NUM_PORTS-1:0] m_axis_data_tlast;
|
||||
wire [ NUM_PORTS-1:0] m_axis_data_tvalid;
|
||||
wire [ NUM_PORTS-1:0] m_axis_data_tready;
|
||||
wire [ NUM_PORTS*64-1:0] m_axis_data_ttimestamp;
|
||||
wire [ NUM_PORTS-1:0] m_axis_data_thas_time;
|
||||
wire [ NUM_PORTS*16-1:0] m_axis_data_tlength;
|
||||
wire [ NUM_PORTS-1:0] m_axis_data_teob;
|
||||
wire [ NUM_PORTS*128-1:0] m_axis_data_tuser;
|
||||
|
||||
wire [NUM_PORTS*ITEM_W-1:0] s_axis_data_tdata;
|
||||
wire [ NUM_PORTS-1:0] s_axis_data_tlast;
|
||||
wire [ NUM_PORTS-1:0] s_axis_data_tvalid;
|
||||
wire [ NUM_PORTS-1:0] s_axis_data_tready;
|
||||
wire [ NUM_PORTS*128-1:0] s_axis_data_tuser;
|
||||
wire [ NUM_PORTS-1:0] s_axis_data_teob;
|
||||
wire [ NUM_PORTS*64-1:0] s_axis_data_ttimestamp;
|
||||
wire [ NUM_PORTS-1:0] s_axis_data_thas_time;
|
||||
|
||||
wire duc_rst;
|
||||
|
||||
// Cross the CHDR reset to the ce_clk domain
|
||||
synchronizer duc_rst_sync_i (
|
||||
.clk (ce_clk),
|
||||
.rst (1'b0),
|
||||
.in (rfnoc_chdr_rst),
|
||||
.out (duc_rst)
|
||||
);
|
||||
|
||||
|
||||
//---------------------------------------------------------------------------
|
||||
// NoC Shell
|
||||
//---------------------------------------------------------------------------
|
||||
|
||||
// TODO: Replace noc_shell_radio with a customized block
|
||||
noc_shell_ddc #(
|
||||
.NOC_ID (NOC_ID),
|
||||
.THIS_PORTID (THIS_PORTID),
|
||||
.CHDR_W (CHDR_W),
|
||||
.CTRLPORT_SLV_EN (0),
|
||||
.CTRLPORT_MST_EN (1),
|
||||
.CTRL_FIFO_SIZE (CTRL_FIFO_SIZE),
|
||||
.NUM_DATA_I (NUM_PORTS),
|
||||
.NUM_DATA_O (NUM_PORTS),
|
||||
.ITEM_W (ITEM_W),
|
||||
.NIPC (NIPC),
|
||||
.PYLD_FIFO_SIZE (MTU),
|
||||
.MTU (MTU)
|
||||
) noc_shell_ddc_i (
|
||||
.rfnoc_chdr_clk (rfnoc_chdr_clk),
|
||||
.rfnoc_chdr_rst (rfnoc_chdr_rst),
|
||||
.rfnoc_ctrl_clk (rfnoc_ctrl_clk),
|
||||
.rfnoc_ctrl_rst (),
|
||||
.rfnoc_core_config (rfnoc_core_config),
|
||||
.rfnoc_core_status (rfnoc_core_status),
|
||||
.s_rfnoc_chdr_tdata (s_rfnoc_chdr_tdata),
|
||||
.s_rfnoc_chdr_tlast (s_rfnoc_chdr_tlast),
|
||||
.s_rfnoc_chdr_tvalid (s_rfnoc_chdr_tvalid),
|
||||
.s_rfnoc_chdr_tready (s_rfnoc_chdr_tready),
|
||||
.m_rfnoc_chdr_tdata (m_rfnoc_chdr_tdata),
|
||||
.m_rfnoc_chdr_tlast (m_rfnoc_chdr_tlast),
|
||||
.m_rfnoc_chdr_tvalid (m_rfnoc_chdr_tvalid),
|
||||
.m_rfnoc_chdr_tready (m_rfnoc_chdr_tready),
|
||||
.s_rfnoc_ctrl_tdata (s_rfnoc_ctrl_tdata),
|
||||
.s_rfnoc_ctrl_tlast (s_rfnoc_ctrl_tlast),
|
||||
.s_rfnoc_ctrl_tvalid (s_rfnoc_ctrl_tvalid),
|
||||
.s_rfnoc_ctrl_tready (s_rfnoc_ctrl_tready),
|
||||
.m_rfnoc_ctrl_tdata (m_rfnoc_ctrl_tdata),
|
||||
.m_rfnoc_ctrl_tlast (m_rfnoc_ctrl_tlast),
|
||||
.m_rfnoc_ctrl_tvalid (m_rfnoc_ctrl_tvalid),
|
||||
.m_rfnoc_ctrl_tready (m_rfnoc_ctrl_tready),
|
||||
.ctrlport_clk (ce_clk),
|
||||
.ctrlport_rst (duc_rst),
|
||||
.m_ctrlport_req_wr (ctrlport_req_wr),
|
||||
.m_ctrlport_req_rd (ctrlport_req_rd),
|
||||
.m_ctrlport_req_addr (ctrlport_req_addr),
|
||||
.m_ctrlport_req_data (ctrlport_req_data),
|
||||
.m_ctrlport_req_byte_en (),
|
||||
.m_ctrlport_req_has_time (ctrlport_req_has_time),
|
||||
.m_ctrlport_req_time (ctrlport_req_time),
|
||||
.m_ctrlport_resp_ack (ctrlport_resp_ack),
|
||||
.m_ctrlport_resp_status (AXIS_CTRL_STS_OKAY),
|
||||
.m_ctrlport_resp_data (ctrlport_resp_data),
|
||||
.s_ctrlport_req_wr (1'b0),
|
||||
.s_ctrlport_req_rd (1'b0),
|
||||
.s_ctrlport_req_addr (20'b0),
|
||||
.s_ctrlport_req_portid (10'b0),
|
||||
.s_ctrlport_req_rem_epid (16'b0),
|
||||
.s_ctrlport_req_rem_portid (10'b0),
|
||||
.s_ctrlport_req_data (32'b0),
|
||||
.s_ctrlport_req_byte_en (4'b0),
|
||||
.s_ctrlport_req_has_time (1'b0),
|
||||
.s_ctrlport_req_time (64'b0),
|
||||
.s_ctrlport_resp_ack (),
|
||||
.s_ctrlport_resp_status (),
|
||||
.s_ctrlport_resp_data (),
|
||||
.axis_data_clk (ce_clk),
|
||||
.axis_data_rst (duc_rst),
|
||||
.m_axis_tdata (m_axis_data_tdata),
|
||||
.m_axis_tkeep (),
|
||||
.m_axis_tlast (m_axis_data_tlast),
|
||||
.m_axis_tvalid (m_axis_data_tvalid),
|
||||
.m_axis_tready (m_axis_data_tready),
|
||||
.m_axis_ttimestamp (m_axis_data_ttimestamp),
|
||||
.m_axis_thas_time (m_axis_data_thas_time),
|
||||
.m_axis_tlength (m_axis_data_tlength),
|
||||
.m_axis_teov (),
|
||||
.m_axis_teob (m_axis_data_teob),
|
||||
.s_axis_tdata (s_axis_data_tdata),
|
||||
.s_axis_tkeep ({NUM_PORTS*NIPC{1'b1}}),
|
||||
.s_axis_tlast (s_axis_data_tlast),
|
||||
.s_axis_tvalid (s_axis_data_tvalid),
|
||||
.s_axis_tready (s_axis_data_tready),
|
||||
.s_axis_ttimestamp (s_axis_data_ttimestamp),
|
||||
.s_axis_thas_time (s_axis_data_thas_time),
|
||||
.s_axis_teov ({NUM_PORTS{1'b0}}),
|
||||
.s_axis_teob (s_axis_data_teob)
|
||||
);
|
||||
|
||||
|
||||
//---------------------------------------------------------------------------
|
||||
// Register Translation
|
||||
//---------------------------------------------------------------------------
|
||||
//
|
||||
// Each DUC block is allocated an address spaces. This block translates CTRL
|
||||
// port transactions in that space to settings bus.
|
||||
//
|
||||
//---------------------------------------------------------------------------
|
||||
|
||||
wire [ 8*NUM_PORTS-1:0] set_addr;
|
||||
wire [32*NUM_PORTS-1:0] set_data;
|
||||
wire [ NUM_PORTS-1:0] set_has_time;
|
||||
wire [ NUM_PORTS-1:0] set_stb;
|
||||
wire [64*NUM_PORTS-1:0] set_time;
|
||||
wire [ 8*NUM_PORTS-1:0] rb_addr;
|
||||
reg [64*NUM_PORTS-1:0] rb_data;
|
||||
|
||||
ctrlport_to_settings_bus # (
|
||||
.NUM_PORTS (NUM_PORTS)
|
||||
) ctrlport_to_settings_bus_i (
|
||||
.ctrlport_clk (ce_clk),
|
||||
.ctrlport_rst (duc_rst),
|
||||
.s_ctrlport_req_wr (ctrlport_req_wr),
|
||||
.s_ctrlport_req_rd (ctrlport_req_rd),
|
||||
.s_ctrlport_req_addr (ctrlport_req_addr),
|
||||
.s_ctrlport_req_data (ctrlport_req_data),
|
||||
.s_ctrlport_req_has_time (ctrlport_req_has_time),
|
||||
.s_ctrlport_req_time (ctrlport_req_time),
|
||||
.s_ctrlport_resp_ack (ctrlport_resp_ack),
|
||||
.s_ctrlport_resp_data (ctrlport_resp_data),
|
||||
.set_data (set_data),
|
||||
.set_addr (set_addr),
|
||||
.set_stb (set_stb),
|
||||
.set_time (set_time),
|
||||
.set_has_time (set_has_time),
|
||||
.rb_stb ({NUM_PORTS{1'b1}}),
|
||||
.rb_addr (rb_addr),
|
||||
.rb_data (rb_data));
|
||||
|
||||
|
||||
//---------------------------------------------------------------------------
|
||||
// DUC Implementation
|
||||
//---------------------------------------------------------------------------
|
||||
|
||||
// Unused signals
|
||||
wire [ NUM_PORTS-1:0] clear_tx_seqnum = 0;
|
||||
wire [16*NUM_PORTS-1:0] src_sid = 0;
|
||||
wire [16*NUM_PORTS-1:0] next_dst_sid = 0;
|
||||
|
||||
localparam MAX_M = CIC_MAX_INTERP * 2<<(NUM_HB-1);
|
||||
|
||||
genvar i;
|
||||
generate
|
||||
for (i = 0; i < NUM_PORTS; i = i + 1) begin : gen_duc_chains
|
||||
wire clear_user;
|
||||
wire clear_duc = clear_tx_seqnum[i] | clear_user;
|
||||
|
||||
wire set_stb_int = set_stb[i];
|
||||
wire [7:0] set_addr_int = set_addr[8*i+7:8*i];
|
||||
wire [31:0] set_data_int = set_data[32*i+31:32*i];
|
||||
wire [63:0] set_time_int = set_time[64*i+63:64*i];
|
||||
wire set_has_time_int = set_has_time[i];
|
||||
|
||||
// Build the expected tuser CHDR header
|
||||
cvita_hdr_encoder cvita_hdr_encoder_i (
|
||||
.pkt_type (2'b0),
|
||||
.eob (m_axis_data_teob[i]),
|
||||
.has_time (m_axis_data_thas_time[i]),
|
||||
.seqnum (12'b0),
|
||||
.payload_length (m_axis_data_tlength[16*i +: 16]),
|
||||
.src_sid (16'b0),
|
||||
.dst_sid (16'b0),
|
||||
.vita_time (m_axis_data_ttimestamp[64*i +: 64]),
|
||||
.header (m_axis_data_tuser[128*i+:128])
|
||||
);
|
||||
|
||||
// Extract bit fields from outgoing tuser CHDR header
|
||||
assign s_axis_data_teob[i] = s_axis_data_tuser[128*i+124 +: 1];
|
||||
assign s_axis_data_thas_time[i] = s_axis_data_tuser[128*i+125 +: 1];
|
||||
assign s_axis_data_ttimestamp[64*i+:64] = s_axis_data_tuser[128*i+ 0 +: 64];
|
||||
|
||||
// TODO Readback register for number of FIR filter taps
|
||||
always @(*) begin
|
||||
case(rb_addr[i*8+7:i*8])
|
||||
RB_COMPAT_NUM : rb_data[i*64+63:i*64] <= {COMPAT_MAJOR, COMPAT_MINOR};
|
||||
RB_NUM_HB : rb_data[i*64+63:i*64] <= NUM_HB;
|
||||
RB_CIC_MAX_INTERP : rb_data[i*64+63:i*64] <= CIC_MAX_INTERP;
|
||||
default : rb_data[i*64+63:i*64] <= 64'h0BADC0DE0BADC0DE;
|
||||
endcase
|
||||
end
|
||||
|
||||
////////////////////////////////////////////////////////////
|
||||
//
|
||||
// Timed CORDIC
|
||||
// - Implements timed cordic tunes. Placed between AXI Wrapper
|
||||
// and AXI Rate Change due to it needing access to the
|
||||
// vita time of the samples.
|
||||
//
|
||||
////////////////////////////////////////////////////////////
|
||||
wire [31:0] m_axis_rc_tdata;
|
||||
wire m_axis_rc_tlast;
|
||||
wire m_axis_rc_tvalid;
|
||||
wire m_axis_rc_tready;
|
||||
wire [127:0] m_axis_rc_tuser;
|
||||
|
||||
dds_timed #(
|
||||
.SR_FREQ_ADDR(SR_FREQ_ADDR),
|
||||
.SR_SCALE_IQ_ADDR(SR_SCALE_IQ_ADDR))
|
||||
dds_timed (
|
||||
.clk(ce_clk), .reset(duc_rst), .clear(clear_tx_seqnum[i]),
|
||||
.timed_cmd_fifo_full(),
|
||||
.set_stb(set_stb_int), .set_addr(set_addr_int), .set_data(set_data_int),
|
||||
.set_time(set_time_int), .set_has_time(set_has_time_int),
|
||||
.i_tdata(m_axis_rc_tdata), .i_tlast(m_axis_rc_tlast), .i_tvalid(m_axis_rc_tvalid),
|
||||
.i_tready(m_axis_rc_tready), .i_tuser(m_axis_rc_tuser),
|
||||
.o_tdata(s_axis_data_tdata[ITEM_W*i+:ITEM_W]), .o_tlast(s_axis_data_tlast[i]), .o_tvalid(s_axis_data_tvalid[i]),
|
||||
.o_tready(s_axis_data_tready[i]), .o_tuser(s_axis_data_tuser[128*i+:128]));
|
||||
|
||||
////////////////////////////////////////////////////////////
|
||||
//
|
||||
// Increase Rate
|
||||
//
|
||||
////////////////////////////////////////////////////////////
|
||||
wire [31:0] sample_tdata, sample_duc_tdata;
|
||||
wire sample_tvalid, sample_tready;
|
||||
wire sample_duc_tvalid, sample_duc_tready;
|
||||
axi_rate_change #(
|
||||
.WIDTH(32),
|
||||
.MAX_N(1),
|
||||
.MAX_M(MAX_M),
|
||||
.SR_N_ADDR(SR_N_ADDR),
|
||||
.SR_M_ADDR(SR_M_ADDR),
|
||||
.SR_CONFIG_ADDR(SR_CONFIG_ADDR))
|
||||
axi_rate_change (
|
||||
.clk(ce_clk), .reset(duc_rst), .clear(clear_tx_seqnum[i]), .clear_user(clear_user),
|
||||
.src_sid(src_sid[16*i+15:16*i]), .dst_sid(next_dst_sid[16*i+15:16*i]),
|
||||
.set_stb(set_stb_int), .set_addr(set_addr_int), .set_data(set_data_int),
|
||||
.i_tdata(m_axis_data_tdata[ITEM_W*i+:ITEM_W]), .i_tlast(m_axis_data_tlast[i]), .i_tvalid(m_axis_data_tvalid[i]),
|
||||
.i_tready(m_axis_data_tready[i]), .i_tuser(m_axis_data_tuser[128*i+:128]),
|
||||
.o_tdata(m_axis_rc_tdata), .o_tlast(m_axis_rc_tlast), .o_tvalid(m_axis_rc_tvalid),
|
||||
.o_tready(m_axis_rc_tready), .o_tuser(m_axis_rc_tuser),
|
||||
.m_axis_data_tdata({sample_tdata}), .m_axis_data_tlast(), .m_axis_data_tvalid(sample_tvalid),
|
||||
.m_axis_data_tready(sample_tready),
|
||||
.s_axis_data_tdata(sample_duc_tdata), .s_axis_data_tlast(1'b0), .s_axis_data_tvalid(sample_duc_tvalid),
|
||||
.s_axis_data_tready(sample_duc_tready),
|
||||
.warning_long_throttle(), .error_extra_outputs(), .error_drop_pkt_lockup());
|
||||
|
||||
////////////////////////////////////////////////////////////
|
||||
//
|
||||
// Digital Up Converter
|
||||
//
|
||||
////////////////////////////////////////////////////////////
|
||||
duc #(
|
||||
.SR_INTERP_ADDR(SR_INTERP_ADDR),
|
||||
.NUM_HB(NUM_HB),
|
||||
.CIC_MAX_INTERP(CIC_MAX_INTERP))
|
||||
duc (
|
||||
.clk(ce_clk), .reset(duc_rst), .clear(clear_duc),
|
||||
.set_stb(set_stb_int), .set_addr(set_addr_int), .set_data(set_data_int),
|
||||
.i_tdata(sample_tdata), .i_tuser(128'b0), .i_tvalid(sample_tvalid), .i_tready(sample_tready),
|
||||
.o_tdata(sample_duc_tdata), .o_tuser(), .o_tvalid(sample_duc_tvalid), .o_tready(sample_duc_tready));
|
||||
|
||||
end
|
||||
endgenerate
|
||||
|
||||
endmodule
|
||||
@@ -0,0 +1,25 @@
|
||||
//
|
||||
// Copyright 2019 Ettus Research, A National Instruments Company
|
||||
//
|
||||
// SPDX-License-Identifier: LGPL-3.0-or-later
|
||||
//
|
||||
// Module: rfnoc_block_duc_regs (Header)
|
||||
//
|
||||
// Description: Header file for RFNoC DUC functionality. This includes
|
||||
// register offsets, bitfields and constants for the radio components.
|
||||
//
|
||||
|
||||
// For now, these offsets match the original DUC
|
||||
localparam DUC_BASE_ADDR = 'h00;
|
||||
localparam DUC_ADDR_W = 8;
|
||||
|
||||
localparam RB_COMPAT_NUM = 0;
|
||||
localparam RB_NUM_HB = 1;
|
||||
localparam RB_CIC_MAX_INTERP = 2;
|
||||
localparam SR_N_ADDR = 128;
|
||||
localparam SR_M_ADDR = 129;
|
||||
localparam SR_CONFIG_ADDR = 130;
|
||||
localparam SR_INTERP_ADDR = 131;
|
||||
localparam SR_FREQ_ADDR = 132;
|
||||
localparam SR_SCALE_IQ_ADDR = 133;
|
||||
|
||||
@@ -0,0 +1,387 @@
|
||||
//
|
||||
// Copyright 2019 Ettus Research, a National Instruments Company
|
||||
//
|
||||
// SPDX-License-Identifier: LGPL-3.0-or-later
|
||||
//
|
||||
// Module: rfnoc_block_duc_tb
|
||||
//
|
||||
// Description: Testbench for rfnoc_block_duc
|
||||
//
|
||||
|
||||
|
||||
module rfnoc_block_duc_tb();
|
||||
|
||||
// Include macros and time declarations for use with PkgTestExec
|
||||
`include "test_exec.svh"
|
||||
|
||||
import PkgTestExec::*;
|
||||
import PkgChdrUtils::*;
|
||||
import PkgRfnocBlockCtrlBfm::*;
|
||||
|
||||
`include "rfnoc_block_duc_regs.vh"
|
||||
|
||||
|
||||
//---------------------------------------------------------------------------
|
||||
// Local Parameters
|
||||
//---------------------------------------------------------------------------
|
||||
|
||||
// Simulation parameters
|
||||
localparam real CHDR_CLK_PER = 5.0; // CHDR clock rate
|
||||
localparam real DUC_CLK_PER = 4.0; // DUC IP clock rate
|
||||
localparam int EXTENDED_TEST = 0; // Perform a longer test
|
||||
localparam int SPP = 128; // Samples per packet
|
||||
localparam int PKT_SIZE_BYTES = SPP*4; // Bytes per packet
|
||||
localparam int STALL_PROB = 25; // BFM stall probability
|
||||
|
||||
// Block configuration
|
||||
localparam int CHDR_W = 64;
|
||||
localparam int THIS_PORTID = 'h123;
|
||||
localparam int MTU = 8;
|
||||
localparam int NUM_PORTS = 1;
|
||||
localparam int NUM_HB = 3;
|
||||
localparam int CIC_MAX_INTERP = 128;
|
||||
|
||||
|
||||
//---------------------------------------------------------------------------
|
||||
// Clocks
|
||||
//---------------------------------------------------------------------------
|
||||
|
||||
bit rfnoc_chdr_clk;
|
||||
bit rfnoc_ctrl_clk;
|
||||
|
||||
sim_clock_gen #(CHDR_CLK_PER) rfnoc_chdr_clk_gen (.clk(rfnoc_chdr_clk), .rst());
|
||||
sim_clock_gen #(CHDR_CLK_PER) rfnoc_ctrl_clk_gen (.clk(rfnoc_ctrl_clk), .rst());
|
||||
sim_clock_gen #(DUC_CLK_PER) duc_clk_gen (.clk(ce_clk), .rst());
|
||||
|
||||
|
||||
//---------------------------------------------------------------------------
|
||||
// Bus Functional Models
|
||||
//---------------------------------------------------------------------------
|
||||
|
||||
RfnocBackendIf backend (rfnoc_chdr_clk, rfnoc_ctrl_clk);
|
||||
AxiStreamIf #(32) m_ctrl (rfnoc_ctrl_clk, 1'b0);
|
||||
AxiStreamIf #(32) s_ctrl (rfnoc_ctrl_clk, 1'b0);
|
||||
AxiStreamIf #(CHDR_W) m_chdr [NUM_PORTS] (rfnoc_chdr_clk, 1'b0);
|
||||
AxiStreamIf #(CHDR_W) s_chdr [NUM_PORTS] (rfnoc_chdr_clk, 1'b0);
|
||||
|
||||
// Bus functional model for a software block controller
|
||||
RfnocBlockCtrlBfm #(.CHDR_W(CHDR_W)) blk_ctrl =
|
||||
new(backend, m_ctrl, s_ctrl);
|
||||
|
||||
// Connect block controller to BFMs
|
||||
for (genvar i = 0; i < NUM_PORTS; i++) begin : gen_bfm_connections
|
||||
initial begin
|
||||
blk_ctrl.connect_master_data_port(i, m_chdr[i], PKT_SIZE_BYTES);
|
||||
blk_ctrl.connect_slave_data_port(i, s_chdr[i]);
|
||||
blk_ctrl.set_master_stall_prob(i, STALL_PROB);
|
||||
blk_ctrl.set_slave_stall_prob(i, STALL_PROB);
|
||||
end
|
||||
end
|
||||
|
||||
|
||||
//---------------------------------------------------------------------------
|
||||
// DUT
|
||||
//---------------------------------------------------------------------------
|
||||
|
||||
logic [NUM_PORTS*CHDR_W-1:0] s_rfnoc_chdr_tdata;
|
||||
logic [ NUM_PORTS-1:0] s_rfnoc_chdr_tlast;
|
||||
logic [ NUM_PORTS-1:0] s_rfnoc_chdr_tvalid;
|
||||
logic [ NUM_PORTS-1:0] s_rfnoc_chdr_tready;
|
||||
|
||||
logic [NUM_PORTS*CHDR_W-1:0] m_rfnoc_chdr_tdata;
|
||||
logic [ NUM_PORTS-1:0] m_rfnoc_chdr_tlast;
|
||||
logic [ NUM_PORTS-1:0] m_rfnoc_chdr_tvalid;
|
||||
logic [ NUM_PORTS-1:0] m_rfnoc_chdr_tready;
|
||||
|
||||
// Map the array of BFMs to a flat vector for the DUT
|
||||
genvar i;
|
||||
for (i = 0; i < NUM_PORTS; i++) begin : gen_dut_connections
|
||||
// Connect BFM master to DUT slave port
|
||||
assign s_rfnoc_chdr_tdata[CHDR_W*i+:CHDR_W] = m_chdr[i].tdata;
|
||||
assign s_rfnoc_chdr_tlast[i] = m_chdr[i].tlast;
|
||||
assign s_rfnoc_chdr_tvalid[i] = m_chdr[i].tvalid;
|
||||
assign m_chdr[i].tready = s_rfnoc_chdr_tready[i];
|
||||
|
||||
// Connect BFM slave to DUT master port
|
||||
assign s_chdr[i].tdata = m_rfnoc_chdr_tdata[CHDR_W*i+:CHDR_W];
|
||||
assign s_chdr[i].tlast = m_rfnoc_chdr_tlast[i];
|
||||
assign s_chdr[i].tvalid = m_rfnoc_chdr_tvalid[i];
|
||||
assign m_rfnoc_chdr_tready[i] = s_chdr[i].tready;
|
||||
end
|
||||
|
||||
rfnoc_block_duc #(
|
||||
.THIS_PORTID (THIS_PORTID),
|
||||
.CHDR_W (CHDR_W),
|
||||
.NUM_PORTS (NUM_PORTS),
|
||||
.MTU (MTU),
|
||||
.NUM_HB (NUM_HB),
|
||||
.CIC_MAX_INTERP (CIC_MAX_INTERP)
|
||||
) rfnoc_block_duc_i (
|
||||
.rfnoc_chdr_clk (backend.chdr_clk),
|
||||
.ce_clk (ce_clk),
|
||||
.s_rfnoc_chdr_tdata (s_rfnoc_chdr_tdata),
|
||||
.s_rfnoc_chdr_tlast (s_rfnoc_chdr_tlast),
|
||||
.s_rfnoc_chdr_tvalid (s_rfnoc_chdr_tvalid),
|
||||
.s_rfnoc_chdr_tready (s_rfnoc_chdr_tready),
|
||||
.m_rfnoc_chdr_tdata (m_rfnoc_chdr_tdata),
|
||||
.m_rfnoc_chdr_tlast (m_rfnoc_chdr_tlast),
|
||||
.m_rfnoc_chdr_tvalid (m_rfnoc_chdr_tvalid),
|
||||
.m_rfnoc_chdr_tready (m_rfnoc_chdr_tready),
|
||||
.rfnoc_core_config (backend.cfg),
|
||||
.rfnoc_core_status (backend.sts),
|
||||
.rfnoc_ctrl_clk (backend.ctrl_clk),
|
||||
.s_rfnoc_ctrl_tdata (m_ctrl.tdata),
|
||||
.s_rfnoc_ctrl_tlast (m_ctrl.tlast),
|
||||
.s_rfnoc_ctrl_tvalid (m_ctrl.tvalid),
|
||||
.s_rfnoc_ctrl_tready (m_ctrl.tready),
|
||||
.m_rfnoc_ctrl_tdata (s_ctrl.tdata),
|
||||
.m_rfnoc_ctrl_tlast (s_ctrl.tlast),
|
||||
.m_rfnoc_ctrl_tvalid (s_ctrl.tvalid),
|
||||
.m_rfnoc_ctrl_tready (s_ctrl.tready)
|
||||
);
|
||||
|
||||
|
||||
//---------------------------------------------------------------------------
|
||||
// Helper Tasks
|
||||
//---------------------------------------------------------------------------
|
||||
|
||||
// Translate the desired register access to a ctrlport write request.
|
||||
task automatic write_reg(int port, byte unsigned addr, bit [31:0] value);
|
||||
blk_ctrl.reg_write(256*8*port + addr*8, value);
|
||||
endtask : write_reg
|
||||
|
||||
|
||||
// Translate the desired register access to a ctrlport read request.
|
||||
task automatic read_user_reg(int port, byte unsigned addr, output logic [63:0] value);
|
||||
blk_ctrl.reg_read(256*8*port + addr*8 + 0, value[31: 0]);
|
||||
blk_ctrl.reg_read(256*8*port + addr*8 + 4, value[63:32]);
|
||||
endtask : read_user_reg
|
||||
|
||||
|
||||
// Set the interpolation rate
|
||||
task automatic set_interp_rate(int port, int interp_rate);
|
||||
begin
|
||||
logic [7:0] cic_rate = 8'd0;
|
||||
logic [7:0] hb_enables = 2'b0;
|
||||
|
||||
int _interp_rate = interp_rate;
|
||||
|
||||
// Calculate which half bands to enable and whatever is left over set the CIC
|
||||
while ((_interp_rate[0] == 0) && (hb_enables < NUM_HB)) begin
|
||||
hb_enables += 1'b1;
|
||||
_interp_rate = _interp_rate >> 1;
|
||||
end
|
||||
|
||||
// CIC rate cannot be set to 0
|
||||
cic_rate = (_interp_rate[7:0] == 8'd0) ? 8'd1 : _interp_rate[7:0];
|
||||
`ASSERT_ERROR(hb_enables <= NUM_HB, "Enabled halfbands may not exceed total number of half bands.");
|
||||
`ASSERT_ERROR(cic_rate > 0 && cic_rate <= CIC_MAX_INTERP,
|
||||
"CIC Interpolation rate must be positive, not exceed the max cic interpolation rate, and cannot equal 0!");
|
||||
|
||||
// Setup DUC
|
||||
$display("Set interpolation to %0d", interp_rate);
|
||||
$display("- Number of enabled HBs: %0d", hb_enables);
|
||||
$display("- CIC Rate: %0d", cic_rate);
|
||||
write_reg(port, SR_M_ADDR, interp_rate); // Set interpolation rate in AXI rate change
|
||||
write_reg(port, SR_INTERP_ADDR, {hb_enables, cic_rate}); // Enable HBs, set CIC rate
|
||||
end
|
||||
endtask
|
||||
|
||||
|
||||
// Test sending packets of ones
|
||||
task automatic send_ones(int port, int interp_rate, bit has_time);
|
||||
begin
|
||||
const bit [63:0] start_time = 64'h0123456789ABCDEF;
|
||||
|
||||
set_interp_rate(port, interp_rate);
|
||||
|
||||
// Setup DUC
|
||||
write_reg(port, SR_CONFIG_ADDR, 32'd1); // Enable clear EOB
|
||||
write_reg(port, SR_FREQ_ADDR, 32'd0); // CORDIC phase increment
|
||||
write_reg(port, SR_SCALE_IQ_ADDR, (1 << 14)); // Scaling, set to 1
|
||||
|
||||
fork
|
||||
begin
|
||||
chdr_word_t send_payload[$];
|
||||
packet_info_t pkt_info;
|
||||
|
||||
$display("Send ones");
|
||||
|
||||
// Generate a payload of all ones
|
||||
send_payload = {};
|
||||
for (int i = 0; i < PKT_SIZE_BYTES/8; i++) begin
|
||||
send_payload.push_back({16'hffff, 16'hffff, 16'hffff, 16'hffff});
|
||||
end
|
||||
|
||||
// Send two packets with EOB on the second packet
|
||||
pkt_info = 0;
|
||||
pkt_info.has_time = has_time;
|
||||
pkt_info.timestamp = start_time;
|
||||
blk_ctrl.send_packets(port, send_payload, /*data_bytes*/, /*metadata*/, pkt_info);
|
||||
pkt_info.timestamp = start_time + SPP;
|
||||
pkt_info.eob = 1;
|
||||
blk_ctrl.send_packets(port, send_payload, /*data_bytes*/, /*metadata*/, pkt_info);
|
||||
|
||||
$display("Send ones complete");
|
||||
end
|
||||
begin
|
||||
string s;
|
||||
chdr_word_t samples;
|
||||
int data_bytes;
|
||||
chdr_word_t recv_payload[$];
|
||||
chdr_word_t metadata[$];
|
||||
packet_info_t pkt_info;
|
||||
|
||||
$display("Check incoming samples");
|
||||
for (int i = 0; i < 2*interp_rate; i++) begin
|
||||
blk_ctrl.recv_adv(port, recv_payload, data_bytes, metadata, pkt_info);
|
||||
|
||||
// Check the packet size
|
||||
$sformat(s, "incorrect (drop) packet size! expected: %0d, actual: %0d", PKT_SIZE_BYTES/8, recv_payload.size());
|
||||
`ASSERT_ERROR(recv_payload.size() == PKT_SIZE_BYTES/8, s);
|
||||
|
||||
// Check the timestamp
|
||||
if (has_time) begin
|
||||
bit [63:0] expected_time;
|
||||
// Calculate what the timestamp should be
|
||||
expected_time = start_time + i * SPP;
|
||||
$sformat(s, "Incorrect timestamp: has_time = %0d, timestamp = 0x%0X, expected 0x%0X",
|
||||
pkt_info.has_time, pkt_info.timestamp, expected_time);
|
||||
`ASSERT_ERROR(pkt_info.has_time == 1 && pkt_info.timestamp == expected_time, s);
|
||||
end else begin
|
||||
`ASSERT_ERROR(pkt_info.has_time == 0, "Packet has timestamp when it shouldn't");
|
||||
end
|
||||
|
||||
// Check EOB
|
||||
if (i == 2*interp_rate-1) begin
|
||||
`ASSERT_ERROR(pkt_info.eob == 1, "EOB not set on last packet");
|
||||
end else begin
|
||||
`ASSERT_ERROR(pkt_info.eob == 0,
|
||||
$sformatf("EOB unexpectedly set on packet %0d", i));
|
||||
end
|
||||
|
||||
// Check the sample values
|
||||
samples = 64'd0;
|
||||
for (int j = 0; j < PKT_SIZE_BYTES/8; j++) begin
|
||||
samples = recv_payload[j];
|
||||
$sformat(s, "Ramp word %0d invalid! Expected a real value, Received: %0d", 2*j, samples);
|
||||
`ASSERT_ERROR(samples >= 0, s);
|
||||
end
|
||||
end
|
||||
$display("Check complete");
|
||||
end
|
||||
join
|
||||
end
|
||||
endtask
|
||||
|
||||
|
||||
//---------------------------------------------------------------------------
|
||||
// Test Process
|
||||
//---------------------------------------------------------------------------
|
||||
|
||||
initial begin : tb_main
|
||||
const int port = 0;
|
||||
test.start_tb("rfnoc_block_duc_tb");
|
||||
|
||||
// Start the BFMs running
|
||||
blk_ctrl.run();
|
||||
|
||||
|
||||
//-------------------------------------------------------------------------
|
||||
// Reset
|
||||
//-------------------------------------------------------------------------
|
||||
|
||||
test.start_test("Wait for Reset", 10us);
|
||||
fork
|
||||
blk_ctrl.reset_chdr();
|
||||
blk_ctrl.reset_ctrl();
|
||||
join;
|
||||
test.end_test();
|
||||
|
||||
|
||||
//-------------------------------------------------------------------------
|
||||
// Check NoC ID and Block Info
|
||||
//-------------------------------------------------------------------------
|
||||
|
||||
test.start_test("Verify Block Info", 2us);
|
||||
`ASSERT_ERROR(blk_ctrl.get_noc_id() == rfnoc_block_duc_i.NOC_ID, "Incorrect NOC_ID value");
|
||||
`ASSERT_ERROR(blk_ctrl.get_num_data_i() == NUM_PORTS, "Incorrect NUM_DATA_I value");
|
||||
`ASSERT_ERROR(blk_ctrl.get_num_data_o() == NUM_PORTS, "Incorrect NUM_DATA_O value");
|
||||
`ASSERT_ERROR(blk_ctrl.get_mtu() == MTU, "Incorrect MTU value");
|
||||
test.end_test();
|
||||
|
||||
|
||||
//-------------------------------------------------------------------------
|
||||
// Test read-back regs
|
||||
//-------------------------------------------------------------------------
|
||||
|
||||
begin
|
||||
logic [63:0] val64;
|
||||
test.start_test("Test registers", 10us);
|
||||
read_user_reg(port, RB_NUM_HB, val64);
|
||||
`ASSERT_ERROR(val64 == NUM_HB, "Register NUM_HB didn't read back expected value");
|
||||
read_user_reg(port, RB_CIC_MAX_INTERP, val64);
|
||||
`ASSERT_ERROR(val64 ==CIC_MAX_INTERP, "Register RB_CIC_MAX_INTERP didn't read back expected value");
|
||||
test.end_test();
|
||||
end
|
||||
|
||||
|
||||
//-------------------------------------------------------------------------
|
||||
// Test various interpolation rates (no timestamp)
|
||||
//-------------------------------------------------------------------------
|
||||
|
||||
begin
|
||||
test.start_test("Test interpolation rates (with timestamp)", 0.5ms);
|
||||
|
||||
$display("Note: This test will take a long time!");
|
||||
send_ones(port, 1, 1); // HBs enabled: 0, CIC rate: 1
|
||||
send_ones(port, 2, 1); // HBs enabled: 1, CIC rate: 1
|
||||
send_ones(port, 3, 1); // HBs enabled: 0, CIC rate: 3
|
||||
send_ones(port, 4, 1); // HBs enabled: 2, CIC rate: 1
|
||||
send_ones(port, 6, 1); // HBs enabled: 1, CIC rate: 3
|
||||
send_ones(port, 8, 1); // HBs enabled: 2, CIC rate: 2
|
||||
send_ones(port, 12, 1); // HBs enabled: 2, CIC rate: 3
|
||||
send_ones(port, 13, 1); // HBs enabled: 0, CIC rate: 13
|
||||
send_ones(port, 16, 1); // HBs enabled: 2, CIC rate: 3
|
||||
send_ones(port, 40, 1); // HBs enabled: 2, CIC rate: 20
|
||||
|
||||
test.end_test();
|
||||
end
|
||||
|
||||
|
||||
//-------------------------------------------------------------------------
|
||||
// Test various interpolation rates (without timestamp)
|
||||
//-------------------------------------------------------------------------
|
||||
|
||||
begin
|
||||
test.start_test("Test interpolation rates (no timestamp)", 0.5ms);
|
||||
|
||||
send_ones(port, 1, 0); // HBs enabled: 0, CIC rate: 1
|
||||
send_ones(port, 3, 0); // HBs enabled: 0, CIC rate: 3
|
||||
|
||||
test.end_test();
|
||||
end
|
||||
|
||||
|
||||
//-------------------------------------------------------------------------
|
||||
// Test timed tune
|
||||
//-------------------------------------------------------------------------
|
||||
|
||||
// This test has not been implemented because the RFNoC FFT has not been
|
||||
// ported yet.
|
||||
|
||||
|
||||
//-------------------------------------------------------------------------
|
||||
// Finish
|
||||
//-------------------------------------------------------------------------
|
||||
|
||||
// End the TB, but don't $finish, since we don't want to kill other
|
||||
// instances of this testbench that may be running.
|
||||
test.end_tb(0);
|
||||
|
||||
// Kill the clocks to end this instance of the testbench
|
||||
rfnoc_chdr_clk_gen.kill();
|
||||
rfnoc_ctrl_clk_gen.kill();
|
||||
duc_clk_gen.kill();
|
||||
end
|
||||
endmodule
|
||||
Reference in New Issue
Block a user