x300: Update firmware for TA control

Browse Source

- Bump firmware compat to 6.1
- Remove crossbar counter logic (the FPGA does *not* support crossbar
  counters anymore, so we remove it from the firmware as well)
- Remove crossbar programming control (this is now provided by RFNoC
  management packets)
- Remove UDP framing control (this is also provided by RFNoC management
  packets)
- Remove Ethernet link/activity LED control (this has been handled by
  the FPGA directly for years now)
- Add functionality to program transport adapter. The TA is programmed
  directly on the settings bus, so for the most part, this is already
  possible from the firmware. The only exception is the 'virtual'
  register to program IP address and MAC at the same time. In the
  firmware, it will perform an ARP lookup of the MAC address, and then
  write the "normal" IPv4 address register in the TA, as well as the MAC
  address registers.
- Updated bootram.coe


Original-commit: 89fb75288e151cd1e43af765618c0665e79801f9

...

This commit is contained in:

Martin Braun

2023-01-10 14:19:00 -08:00

committed by michael-west

parent 73ef818632

commit 292d31fc52

1 changed files with 748 additions and 748 deletions

Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL

Download Patch File Download Diff File Expand all files Collapse all files

top/x300/ip/bootram/bootram.coe

+748 -748

File diff suppressed because it is too large Load Diff